i have one super starview box , and a starview box , and i want to send the working firmware , to the older , box, through , ( user setup) in s/w transfer, /data. code sw/ is it ok to do this?? and will it work updateing the firmware in the older box to auto flash . as i cant find the file i need to send through the gtomv400", i have tryed sending , starview 1/clone fix .. starview 1 genuine, and genuine 2, they all are dated 2007, i think i need one with 2008 on it ,, i have look in eamos fta library, but im not sure what one i need to send to the box , the old starview is a clone i think , it has two scarts inputs, on the right, if you were looking at it from the back, anyone help me with any of this? thanks for your time and help... michael
if you want help then post in the proper threads ... failure to comply with the rules might earn yourself a 2day suspension or a permanent ban http://forums.afterdawn.com/thread_view.cfm/650377
As this is not a code request issue I will answer your query You can only transfer the firmw@re from b0x to b0x using 2 identical b0xes , therefore you cannot send the Supr b0x firmw@re to Sv 1 or 2 as they ALL use different firmw@re You will need version (Crypstar - V1.4 genuine only) firmware for GENUINES found in "Starvi*w" firmware folder. You will need version CryptStar-v1.4-Core257.bin firmware for CLONES found in "Starvi*w" firmware folder. You will need version 4.50 firmware for THE B0X IRELAND found in "THE B0X" firmware folder. You will need version 4.51 firmware for THE B0X UK found in "THE B0X" firmware folder. You will need version 6.1 firmware for THE SUPER B0X found in "THE B0X SUPER" firmware folder.
thanks celtic 71 , i have downloaded the right file , and am up and running again , thanks for all your help , PS" SORRY topcat96" for posting in the wrong threads... michael .
