Lite-on drive not ejecting! HELP!!!

i was flashing in jungleflasher where the lite-on was erased then it stopped responding, i closed it and it cannot eject the drive anymore?

when i go back to jungleflasher i look for my port and under properties i see

vendor: a1a1a1a1a1
name: a1a1a1a1a1a1a1a1a1
f/w rev: a1a1
reserved: a1a1a1a1a1a1a1a1a1a

is my drive bricked or i can get this problem resolved?

 

can someone show me how to put the firmware back on this drive because it looks like there is no firmware anymore on it, i was soo close all i had to do was click write! it stopped responding when i erased it???

 

someone reply quick its been so long waiting to flash my drive finally i was almost done and this happened, im soo concerned!!!

 

?

 

Make a boot disk with l-o-erae.exe, dosflash 1.7 and dosflash.typ on it. Andput your lite_cfw.bin on it too. Do the erase in dos with l-o-eras #### (where #### is your port)
Keep doing it until you get status of FF72
Then run dosflash and flash your drive with your lite_cfw.bin you made in Jungleflasher.

 

can you please make a tutorial video on youtube i will appreciate that

 

Your fix doesn't require a video. Your drive simply doesn't have firmware on it and that is why it won't eject. Just follow what PS2Menace said and you will fix your problem.

 

i never used these programs before thats why im confused, trying this method

 

And this is why we say READ the STICKIES before you do anything.

 

can you show diagram pictures on this please

 

DosFlash Tutorial

Edit - The tutorial linked is dosflash32.

7. I then took a jump drive and formatted it and made it bootable from iPrep, deleted all files off jump drive that iPrep put on it, and copied over DosFlash16( contains 2 files DosFlash.exe and DosFlash.typ from DoshFlash 1.7 beta)(google DosFlash 1.7 beta for download) and also copied Lite_CFW.bin. Also L-O-Eras.exe At this point jump drive should only have 4 files in it.
8. Booted to my jump drive and typed L-O-Eras.exe + my SATA number ( Mine was EC00 [VIA CHIPSET]), Kept typing that til I got the 72 status (FF720. Then I typed dosflash.exe and it will start to populate all info off of sata. Make sure you have any sata CD/DVD drives unplugged. You should see something like
NAME: MXXC(MX25L2005) That is your Lite-ON drive, the one you want (my corresponding number was 6)
9. It will give you 3 different commands, Read, Erase, Write
10. I chose write and it prompted me for firmware so I typed Lite_CFW.bin it started erasing and then started to write the firmware.

 

will your DosFlash Tutorial help me write the firmware back on?

 

This is the video that i followed when the same thing happened to my liteon

Lite-on Recover if it locked up after erase video

 

thank you so much!!! ill try this

 

this will flash it aswell?

 

would i have to reflash this back with jungleflasher?

 

you know how you say copy all the files and lite_cfw i dont have lite_cfw?, this is the only one im missing, what do i do, can i get it from somewhere ?

the problem was when i had to do the power cycle for 1 sec and quickly turn it back on just before i had to click write, this was when it stopped responding i have the following bin files identity, inquiry, dummy and key

 

i got the DosFlash.exe, DosFlash.typ & L-O-Eras on a usb drive
i need the lite_cfw, can i load the ix15-liteon instead? will this work?

 

You make a lite_cfw.bin in JungleFlasher. You load your dummy.bin then let it load the ixtreme 1.51 Lite-on fw. Or you load it manually if it doesn't load. Then spoof target to source, then save it. It'll save as... get this... lite_cfw.bin


We've told you this about 15 responses ago. Well we would've.. if you would have taken the first piece of advice I gave you, which was to READ.