Lite-on SHM-165H6S

Discussion in 'DVD / Blu-ray drives' started by Door69, Nov 29, 2006.

  1. Door69

    Door69 Guest

    Hi me again.Having problems with the lite-on it only burns in 1x.
    it is not in pio mode both of them are in dma. I have uninstalled ythe lite on and still nothing. It takes a hour to burn a disc. So frustaing. I am using verbatim DVD+R 16x disc. Also why can't my Pioneer DVR-109 burn the Verbatim disc? Someone please help. Going crazy. Thank-you in advance.
     
  2. Ripper

    Ripper Active member

    Joined:
    Feb 20, 2006
    Messages:
    4,697
    Likes Received:
    13
    Trophy Points:
    68
    Last edited: Nov 30, 2006
  3. Door69

    Door69 Guest

    Hey Ripper Thanks for all your help before. Every time I try to install the firmware for the Pioneer it says target not available. What am I doing wrong?
     
  4. Ripper

    Ripper Active member

    Joined:
    Feb 20, 2006
    Messages:
    4,697
    Likes Received:
    13
    Trophy Points:
    68
    Did your pioneer come in the pc or did you put it in?
     
  5. Door69

    Door69 Guest

    I installed myself. My computer came as basic as it gets. I have been improving on my own. Planning to build my own, but that is a different forum. Thanks for any help.
     
  6. Ripper

    Ripper Active member

    Joined:
    Feb 20, 2006
    Messages:
    4,697
    Likes Received:
    13
    Trophy Points:
    68
    This should be the correct firmware for your drive then..
    http://www2.melcoinc.co.jp/pub/hd/dvmrdm16fb_fw858.exe

    Before you run that, use this tool (Nero Info Tool - found here) to check what version your firmware is. If it is 8.xx then that is the right one. If it is 1.xx, then you need to get back to me. :)

    I am presuming you need the 8.xx firmware, cos 1.xx firmware could not find the target drive, suggesting wrong firmware. :)
     
  7. Door69

    Door69 Guest

  8. Ripper

    Ripper Active member

    Joined:
    Feb 20, 2006
    Messages:
    4,697
    Likes Received:
    13
    Trophy Points:
    68
    Are you sure you don't have a disk in the drive or anything when trying to run it? Also, are you sure the drive is listed as working properly in Hardware Manager and that the IDE cables are in properly.
     
  9. Door69

    Door69 Guest

    I retried again. Made sure no disc was in the drive. I even burned a movie to make sure it still works,(used a fuji) but still won't burn verbatim.
     
  10. Ripper

    Ripper Active member

    Joined:
    Feb 20, 2006
    Messages:
    4,697
    Likes Received:
    13
    Trophy Points:
    68
    Very strange. Maybe you have a faulty batch of Verbs...
     
  11. Door69

    Door69 Guest

    Well the Lite-on burns them. Got from Newegg. Well I appreciate the help. Thank-You
     

Share This Page