looking for old ver digivox t

I hope someone can help me in getting the old Ver 3.1 or Ver 3.2
files so that I can reset the digivox t to the way it arrived
or a pm so that i can get them from some that has them on file
thanks

 

Why would you need older firmware which will not au?

 

there is no FTA firmware for that box any firmware that you get will still be able to turn the emulator on so you are out of luck on this

 

thanks for the info guys.
The reason i wanted the old version was to return the Box t to its origional s/w so maybe I can get the channel bin,
after that i was hoping to add this bin file to ver 3.3 to get the channel nos to go with the names and maybe the numbers back on the
display.

 

it wont matter what you do the reason you have the numbers wrong on your box is down to you cable make sure you are in the main room of the house where the downconverter power unit is and scan from there and if you have a splitter on it take it off

Make sure you do a factory reset first turn the box off at the back then back on then scan

 

Thanks fergusrb
I have tried a reset a few times but everything comes back on.
On the display 85.20 comes up and no numbers with the channel
names ?? .
1 box with ver 3.2 without flashing has all the numbers and names
so I know that this will not AU so nothing wrong with the aerial
?? any new ver to 3.3

 

ok mate get rid of the other file you have there and download this one its the revamped version of that v3300 this should fix that 85.20 on the display

http://www.4shared.com/file/90506173/ec99fa7b/digivox_ter_v3300.html

 

Thanks mate i will try and get this off and running in the next day or
two and let you know how i got on.
appreciate the info .
If I do want to reset the Digivox t back to the origional S/w
where can i get a ver 3.1 or 3.2
Father in law got a new digibox t on friday s/w ver 3.1 on this and cannot get into the system to turn on the emu, will probably have to flash up to ver 3300 i presume ver 3.3 is the same as ver 3300 ??

 

the one i gave you the 3300 should fix 8520 on your box its a modified version of the other

here is the 3200 or you try that and let me know ok

http://www.4shared.com/file/64983000/66101a06/digivox_ter_v3200.html

 

thanks again for that.
great to have the both versions on file, just in case i have to go right back to the start.
I could not find that one (ver 3200) before.
i think reading the info on other treads i flashed the box then when I turned it on and went straight into the cas system and turned the emu
on before doing a auto scan first then turning the emu on.
you learn by mistakes

I`m new to this chat rm stuff but getting hooked on it.
will let you know the out come.
will also send you a pm

 

i would have thought u flash first,hook up,install and power on antenna,scan,find channels,emu to on and exit out.

 

when you say flash first does this mean when connected to the pc that the box is not turned on ?? when flashing.
also their is not enough power to run the aerial when you turn on the
aerial power so that is why you get a power 24v supply with downconverter this with the Probe type aerial not mesh.

 

you connect the cable from your pc to the box and power on the box and put it in standby then press the download button when it is flashing you will see the progress bar going up leave it till the box actually reboots by itself before touching anything then after it has finished you connect it to your cable for you tv go to the menu and installation in there you will see antenna power turn that on then do your scan then when you have all the channels exit out then back to the menu system info then press 1004 on the remote key pad and turn on the EMU and thats it finished

 

will follow that to the letter thanks.
will give this ago as soon as i can and give you up date
thanks again to you both.
p.s.
Just off the phone with F/in law glad to hear that i can take his ver 3100 off his box as the new disclaimer says any box faulty (under guarantee) cannot be returned if updated or any s/w newer than one supplied on the box.
I presume ver 3100 is what the factory set them with.

 

you will not be able to take the firmware off that box it wont let you sorry to be the bearer of bad news

 

Are you saying that even if you flash the box the old ver is still on there and neither ver can be removed ??

 

you cannot take firmware off a box its on only put it on to it when you flash a new file on to the box it overwrites the other one

but when a box is new and you get it you cannot take that file off it only overwrite it only nothing more

 

got it.
On the downloader 10 what is the uploader button for
only becomes active if you have the channel selected ??

 

only for uploading the channel file from your box to your pc

dont recommend doing this because they are always changing the freq on channels so a waste of time to me

 

I had tried this on a digibox t running ver3200 to get the channel names and numbers but when connected and selected that button no bin
file was seen in the bar but showed the file where i had the ver 3300
in that folder on the desktop.