hello all I have a dbox and unfortunately we have lost all the of channels. I followed the below instructions from an older thread and changed the keylist.txt file to read codes which I have got from the internet, but for some reason it's not working and it's not saving the codes I'm inputting. Does anyone know what I'm doing wrong? 00-3FB8366277E5E276 01-355ED6406EAA9941 also tried 00-3FB8366272E5E276 01-355ED6406EAA9941 1 . Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK. You should now be looking at the files on the D Box. 2 . Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen! 3 . When you find the VAR file and you press OK, scroll to Keys & press OK 4 . Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again. 5. After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom. 6. Now you need to scroll to the code that you are going to change, e.g old code is as follows: N S401 00 587436A3B220CB46 and we need to change it to N S401 00 587436A3B230CB46 We are only changing one digit this time, in future you may have to change more digits. 7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor! 8 . Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK. 9 . When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK. 10 . You should now have changed the code, to get back to the TV screen, press home. 11 . In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!
HI CAN ANYONE HELP ME I HAVE A D BOX THAT HAS LOST ITS CHANELS BUT I DONT HAVE THE CODE NS401 00 587436A3B220CB46 ON MY LIST AND THEREFORE CANT CHANGE THE ONE DIGIT REQUIRED PLEASE HELP
Hi If you guys have ftp connection why not update to the new roms to get AU back as before the VM attack, instead of peeing about with keys when they change? http://forums.afterdawn.com/thread_view.cfm/654284 jbvid
