Magic Memory Stick and Custom Firmware Installation Guide 5.00 m33-6

download link - http://www.mediafire.com/?ndkmmowyzgi


Requirements:
PSP 100X or 2001 with OFW.
Pandoras Battery (you can get a nice one for $6.33 here)
Spare battery
Memory stick 256 MB - 2 GB (4 GB might work you can try)
Computer (XP or Vista)

Welcome to the Tutorial for Putting the Magic Memory Stick Files onto
your Memory Stick PRO Duo, and also Using your Magic Memory Stick along with a Pandoras Battery to get CFW 5.00 M33-6 onto your PSP.

1. After Files Are Extracted, Double click 'PSP Grader v006 - Lite Setup.exe'
Install PSP Grader onto your computer.

2. Plug your PSP into your computer via USB Cable, or remove your Memory Stick PRO Duo and insert into your computers memory stick drive.

3. Open up your Memory Stick folder on your computer either by Clicking 'Open folder to view files' when the screen comes up or go to My Computer then clicking the drive of your memory stick.

4. Create a folder on your desktop named PSP. Hold 'Ctrl' and drag all of the
files from your memory stick into the 'PSP' folder on your desktop. Unplug your
psp or take out your memory stick and insert it back into your psp.

5. Go to your PSP. Settings -> System Settings -> Format Memory Stick.

6. Plug your PSP into your computer via USB Cable, or remove your Memory Stick PRO Duo and insert into your computers memory stick drive.

7. Open up your Memory Stick folder on your computer either by Clicking 'Open folder to view files' when the screen comes up or go to My Computer then clicking the folder of your memory stick.

8. Go to the files you downloaded and open 'Pre-made 5.00m33-4'. Drag all
of the files onto your memory stick. Click 'Yes to all'.

9. Open the PSP Grader program we installed earlier. Don't Worry about the top stuff, look until you see 'Select IPL' and under it select 'None'. Underneath it will say 'Target Memory Stick'. Uncheck Format Memory Stick, and directly beneath that where it says 'PSP Memory Stick:' choose the drive where you PSP is located on your computer.

10. At the bottom, click 'Inject IPL Only'. A box will pop up that says
'Progress'. When it is done, click 'OK' at the bottom of the box.
Close PSP Grader.

You Have now created a Magic Memory Stick!


Installing Custom Firmware on your PSP

1. Unplug your PSP. Shut down your PSP by holding the power switch up until
the PSP is completely off. Remove your battery from your PSP, and disconnect any cords connected to the PSP. Keep your Magic Memory stick inside the PSP.

2. Hold the 'up' button on the Directional Pad on the PSP. While still holding
the 'up' button, Insert your Pandoras Battery (or TOOL). The PSP should
automatically turn on. A Menu should appear. Select 'Install 5.00 M33'.

3. Once it has installed, reinsert your normal battery. Turn on your PSP.
Settings -> System Settings -> Format Memory Stick.

4. Plug your PSP into your computer via USB Cable, or remove your Memory Stick PRO Duo and insert into your computers memory stick drive.

5. Copy the files from your PSP folder back onto your memory stick. Exit USB
Mode.

6. Turn on your PSP. Go over to Game -> Memory Stick -> 5.00 Update. Complete the update.

You are now running 5.00 m33-6 on your PSP!

 

chec out links below