if you have Missing channels you can try this. I have seen a few posts about channels missing when doing a full scan. Here's a little trick you can try that may help if you're having problems finding any particular channels or are missing channels: Try and determine the lowest transponder frequency that you can get a signal on. Look at the frequencies you already have on the channels saved so far and choose the lowest. Then in the installation menu select MANUAL SCAN and set that as the frequency. Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow. While still highlighted, click OK. Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits). Using this method my Starview indicated it scanned 56/56 transponder frequencies as opposed to 48 in Auto scan on one main provider. I also gained a few extra channels. The other transponders may have been picked up by scanning other providers. Hi i seen this post in relation to missing channels and was wondering if anyone knows anything about it? When i did it, it never went from 1/1 to 1/?? it just found 5 channels. Im struggling in getting channels, when i scan i dont get anything more then 34 channels and not any scrambled ones
OK firstly please stay on one thread, jumping around the site only annoys people who are waiting to answer you!!! What box do you have? Who is your provider? what is your system info? Have you flashed the box?
hi i am also missing channels s*yn*ws and s*yaction have done factory reset and have located 107 channels but even after trying manual scan still can not find these.have done rescan and also turned on emu but to no avail
You still haven't said what box you have, or where you are or who your provider is? People can't help you unless you give them the relevant information.
I`m in Dublin, so i wont be able to help you with c*or*s freqs in limerick. You must know someone local with a b0x, if you do go over & note the freqs on the missing channels from their b0x & manual scan when you get back.
