Guys, I posted a few days ago on DVD Newbies with burning problems, and I thought I'd resolved it but I haven't. Basically I burn via iamge, vobs, alcohol files using Nero 7, Ulead, DVDFab etc. Using all of them the movie skips for 30 seconds after 12 minutes (always the same place - on about 40 DVDs now), then the same after 30 minutes and similar every 30 minutes or so after that. After my last post I explained I used 8X Ridisc, datawrite DVD-R etc, most of the guys said it's the media. I tried a Verbatim I had hanging around - thought I'd cracked it but I haven't - it was just that the skip was smoother and I didn't notice it. So I picked up some Taiyo TYG02 last night - still skipping same place even with these. Any other ideas? My writer is an external LG 2164 16X, I've updated the firmware. Is there anything I can run to check. I know Nero had a DVD info tool, or anything else that I can run then do a grab and post the results here so you guys can have a look. I've also cleaned the lens with a normal lens cleaner disc. Or any other ideas of what the problem is? Cheers in advance
When you burn files using Nero it creates a Log file. I think when the job is finished it might ask you if you want to save the log file. Select Yes and post the log file here making sure to edit out your serial number. The serial number is normally shown at the beginning of the log file.
As requested, here is a copy of the log file: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 1 TA 2 - 7.2.3.2 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 1 TA 2 - 7.2.3.2 Adapter driver: <USB 2.0> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2060AT atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-RAM UJ-815A atapi Port 1 ID 0 DMA: On CdRomPeripheral : YT2295R TJF175T 2.0B vaxscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === MATSHITA DVD-RAM UJ-815A D: CDRom0 YT2295R TJF175T E: CDRom1 HL-DT-ST DVDRRW GSA-2164D F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 253MB (259300kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.7.2006 Burn DVD Image 18:32:49 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 18:32:49 #2 Text 0 File Reader.cpp, Line 124 Reader running 18:32:49 #3 Text 0 File Writer.cpp, Line 113 Writer F: HL-DT-ST DVDRRW GSA-2164D running 18:32:49 #4 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 18:32:49 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2263397 (502:58.47, 4420MB) 18:32:49 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 18:32:50 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRRW GSA-2164D, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 18:32:50 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:32:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2263398 (2263398) = #2263398/502:58.48 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263398 blocks [F: HL-DT-ST DVDRRW GSA-2164D] -------------------------------------------------------------- 18:32:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [F: HL-DT-ST DVDRRW GSA-2164D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4635439104, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2263398 | lead-out | 1 | 0x41 | 0x00 18:32:50 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 18:32:50 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 18:32:50 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (11,080 KB/s) 18:32:50 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:32:50 #15 Text 0 File DVDR.cpp, Line 2869 Recording mode: Sequential Recording Mode 18:32:50 #16 Text 0 File DVDR.cpp, Line 3025 Start write address at LBA 0 DVD high compatibility mode: Yes 18:32:50 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 291 F: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x04152600: Len x1008 18:32:50 #18 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:44:16 #19 Text 0 File WriterStatus.cpp, Line 116 <F: HL-DT-ST DVDRRW GSA-2164D> start writing Lead-Out at LBA 2263398 (228966h), length 0 blocks 18:44:16 #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18:44:16 #21 Text 0 File DVDR.cpp, Line 3265 EndDAO: Last written address was 2263391 18:44:46 #22 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
