I have an all most 2 year old Pioneer DVR-105, never ever gave me a lick of trouble. I use the last version of DVDdecrypter then i use Nero Burning Rom 6 to burn the movie. Everything goes just like normal till the very end of the burning process (45 minutes later) an error happens and the disc wont burn. The problem is intermittent and i can't figure out if it's my burner, the Media or what. I usually never have a problem with these discs. The brand is called "Platinuim" DVD-r i got them at Micro Center last year. Sometimes they burn.....sometimes i get coasters. is Season one of Arrested Development copyright protected or something? I'm confused. This problem with bad un-burnable DVD's and burning Errors happed all around when decrypter went off line.
Have you got the latest Nero 6.6.0.16 and is your Pioneer firmware current try here http://pioneerdvd.rpc1.org/DVR-105 v1.33 - RPC-1 + 2xDVD-R + 12xRip.zip
yeah 6.6.0.16, but no on the firmware. I'm doing that right now....i did some fishing and found some info on the discs. They are Bencole Platinum Series 4.7 4x. and they apparently suck. I've had no problems till now though so i doubted it was the problem....maybe it is. but is Arrested Development or Tim Burton's BATMAN copyright protected? Niether burned at all i went through 3 discs each ( at various speeds) till i decided to quit.
You say you get some coasters? Make sure your burning at the slowest speed. You will get a burn rate of 99% success with no pixels or messed up scenes. Your drive my be out of alignment I say this because my first burner used nearly all the time doesnt burn very well anymore (has about 80% success now) whats nice is I get my errors on the read phase and dont usually waste disks. The reason I know its the burner is I have another one in another computer identical burners and it works on that one. As burners are almost free I suggest getting a 2nd one, when you get an error switch to the 2nd drive and usually that will solve your problem. Again I cannot say this more USE THE SLOWEST BURN SPEED POSSIBLE!
That is probably the problem for you. Make sure to use high quality media such as genuine Taiyo Yuden, Verbatim and Maxell (made in japan). In addition, make sure all your burning applications (both Nero and DVD Decrypter) is up-to-date, and your burner's firmware as well. Can you post the error that DVD Decrypter or Nero generated? For Nero go to C:\Program Files\Ahead\Nero\NeroHistory -- and now remember to take out/edit your Nero serial before posting on here alright.
My Nero is upto date, i updated my firmware...thank you Gwendolin, and i'm using the most current.....and last update of Decrypter. I burned first at 2x, then at 1x.....both produced internal target errors. I also suspect i got a bunk batch of media but don't know how to test it...or read it if i did. So here's the error mesage, thanks for the help thus far. ********** Nero Recode 2 ********** Version: 2.2.6.17 J. Baker 1a2300067130121XXXXXXXXX Project type: Copy entire DVD Target size: DVD5 (2282925) 20:38:46 File burn_dvdfiles.cpp, Line 407 Compile DVD: Cancel Burn settings: Target: PIONEER DVD-RW DVR-105 Number of copies: 1 Write speed: 1385 KB/s Temp folder: F: (6270992384 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: false Compress Adaptive: true 20:40:08 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VMG Menus Vobs [9 vobus] 1.69MB -> 1.32MB [R 0.00] Video: 1.29MB, extra: 0.02MB Audio: 0 streams Subpicture: 1 streams 0. 0. Unspecified 0.00MB [enabled] VTS_01 Menus Vobs [1 vobus] 0.22MB -> 0.17MB [R 0.00] Video: 0.17MB, extra: 0.00MB Audio: 0 streams Subpicture: 1 streams 0. 0. Unspecified 0.00MB [enabled] VTS_01 Title Vobs [1 vobus] 0.01MB -> 0.01MB [not compressable] Video: 0.01MB, extra: 0.00MB Audio: 0 streams Subpicture: 0 streams VTS_02 Title Vobs [16 vobus] 7.56MB -> 3.50MB [R 0.00] Video: 3.47MB, extra: 0.03MB Audio: 0 streams Subpicture: 0 streams VTS_03 Title Vobs [3289 vobus] 1030.09MB -> 661.62MB [R 0.09] Video: 564.84MB, extra: 96.78MB Audio: 2 streams 0. 0. Dolby Digital 2-ch English 38.97MB [enabled] 1. 1. Dolby Digital 2-ch English 38.79MB [enabled] Subpicture: 3 streams 0. 0. English 3.80MB [enabled] 1. 1. Spanish 4.40MB [enabled] 2. 2. French 4.40MB [enabled] VTS_04 Title Vobs [32 vobus] 12.25MB -> 5.85MB [R 0.00] Video: 5.42MB, extra: 0.43MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 0.37MB [enabled] Subpicture: 0 streams VTS_05 Title Vobs [1993 vobus] 607.88MB -> 366.69MB [R 0.09] Video: 339.30MB, extra: 27.39MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 23.50MB [enabled] Subpicture: 0 streams VTS_06 Menus Vobs [3422 vobus] 121.70MB -> 92.70MB [R 0.00] Video: 45.01MB, extra: 47.69MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 34.75MB [enabled] Subpicture: 1 streams 0. 0. Unspecified 6.26MB [enabled] VTS_06 Title Vobs [15087 vobus] 5068.18MB -> 3190.00MB [R 0.09] Video: 2923.19MB, extra: 266.82MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 185.82MB [enabled] Subpicture: 3 streams 0. 0. English 18.57MB [enabled] 1. 1. Spanish 14.54MB [enabled] 2. 2. French 18.41MB [enabled] VTS_07 Title Vobs [759 vobus] 233.66MB -> 143.30MB [R 0.00] Video: 131.86MB, extra: 11.43MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 9.95MB [enabled] Subpicture: 0 streams 20:40:08 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 20:40:08 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 20:40:08 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2286428 sectors (2298496) 20:40:08 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2286428 sectors (2286442 required) 20:40:08 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4465.68MB (4465.68MB obtained) 20:40:08 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 20:40:09 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VMG Menus Vobs VMG Menus Vobs: Original 1.69MB -> Expected 1.32MB -> Output 1.31MB Finished error -0.00MB Ratio encoded = 0 Original encoded = 0 Slide encoded = 9 StillImage encoded = 0 Output extra size = 0.02MB Source video size = 1.67MB Pictures Modified [I 9] [P 0] [B 0] 20:40:09 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Menus Vobs VTS_01 Menus Vobs: Original 0.22MB -> Expected 0.17MB -> Output 0.17MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 0 Slide encoded = 1 StillImage encoded = 0 Output extra size = 0.00MB Source video size = 0.22MB Pictures Modified [I 1] [P 0] [B 0] 20:40:09 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 0.01MB -> Expected 0.01MB -> Output 0.01MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 0 Slide encoded = 1 StillImage encoded = 0 Output extra size = 0.00MB Source video size = 0.01MB Pictures Modified [I 1] [P 0] [B 0] 20:40:13 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_02 Title Vobs VTS_02 Title Vobs: Original 7.56MB -> Expected 3.50MB -> Output 3.50MB Finished error 0.00MB Ratio encoded = 15 Original encoded = 0 Slide encoded = 1 StillImage encoded = 0 Output extra size = 0.03MB Source video size = 7.53MB Pictures Modified [I 16] [P 62] [B 148] 20:51:58 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_03 Title Vobs VTS_03 Title Vobs: Original 1030.09MB -> Expected 661.62MB -> Output 661.62MB Finished error -0.00MB Ratio encoded = 3286 Original encoded = 3 Slide encoded = 0 StillImage encoded = 0 Output extra size = 95.15MB Source video size = 934.94MB Pictures Modified [I 3647] [P 10718] [B 26139] 20:52:07 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_04 Title Vobs VTS_04 Title Vobs: Original 12.25MB -> Expected 5.85MB -> Output 5.85MB Finished error 0.00MB Ratio encoded = 31 Original encoded = 0 Slide encoded = 1 StillImage encoded = 0 Output extra size = 0.44MB Source video size = 11.81MB Pictures Modified [I 34] [P 155] [B 263] 21:00:16 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_05 Title Vobs VTS_05 Title Vobs: Original 607.88MB -> Expected 366.69MB -> Output 366.71MB Finished error 0.02MB Ratio encoded = 1991 Original encoded = 0 Slide encoded = 2 StillImage encoded = 0 Output extra size = 27.57MB Source video size = 580.31MB Pictures Modified [I 2128] [P 8321] [B 19766] 21:01:05 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_06 Menus Vobs VTS_06 Menus Vobs: Original 121.70MB -> Expected 92.70MB -> Output 92.68MB Finished error 0.00MB Ratio encoded = 252 Original encoded = 3123 Slide encoded = 47 StillImage encoded = 0 Output extra size = 47.33MB Source video size = 74.36MB Pictures Modified [I 3483] [P 1112] [B 2287] 21:19:53 File NeroRecorder.cpp, Line 593 Added extra file VTS_06_2.VOB 21:37:34 File NeroRecorder.cpp, Line 593 Added extra file VTS_06_3.VOB 21:56:02 File NeroRecorder.cpp, Line 593 Added extra file VTS_06_4.VOB 21:57:34 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_06 Title Vobs VTS_06 Title Vobs: Original 5068.18MB -> Expected 3189.98MB -> Output 3189.99MB Finished error 0.00MB Ratio encoded = 15075 Original encoded = 6 Slide encoded = 6 StillImage encoded = 0 Output extra size = 254.38MB Source video size = 4813.80MB Pictures Modified [I 16804] [P 49539] [B 120936] 22:00:46 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_07 Title Vobs VTS_07 Title Vobs: Original 233.66MB -> Expected 143.29MB -> Output 143.29MB Finished error 0.00MB Ratio encoded = 758 Original encoded = 0 Slide encoded = 1 StillImage encoded = 0 Output extra size = 10.59MB Source video size = 223.07MB Pictures Modified [I 823] [P 3399] [B 7207] 22:00:47 File burn_dvdfiles.cpp, Line 547 Compile DVD: completed successfuly (4465.68MB) 22:00:47 File NeroRecorderBase.cpp, Line 1096 Burning 29 files with total size of 4682606592 bytes on hard disk 22:00:47 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 1a2300067130121614204950 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.16 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 16b Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD300AA-60BAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On CdRomPeripheral : CENDYNE_ 481648AX atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-105 D: CDRom0 CENDYNE_ 481648AX E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 64MB (65564kB) Memory in use : 74 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.11.2005 NeroAPI 10:00:47 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:00:47 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:00:47 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:00:47 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 10:00:47 PM #5 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-105 running 10:00:47 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:00:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:00:48 PM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:00:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286991 (508:13.16, 4466MB) 10:00:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:00:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R Disc Manufacturer: VDSPMS - AB 01 Disc Application Code: 64, Disc Physical Code: 193 10:00:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:00:48 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286992 (2286992) = #2286992/508:13.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286992 blocks [PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 10:00:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683759616, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286992 | lead-out | 1 | 0x41 | 0x00 10:00:48 PM #15 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:00:48 PM #16 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:00:48 PM #17 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:00:48 PM #18 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 1x (1,385 KB/s) 10:00:48 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:00:48 PM #20 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 10:00:48 PM #21 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON 10:00:48 PM #22 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 10:00:48 PM #23 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:00:50 PM #24 Text 0 File Cdrdrv.cpp, Line 1286 22:00:50.875 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later 10:00:56 PM #25 SCSI -1061 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06090000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 10:00:56 PM #26 CDR -1061 File Writer.cpp, Line 311 Internal target failure 10:00:56 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:00:57 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:00:57 PM #29 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 767 10:00:57 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\NeroCD2k.sys': Ver=2.0.0.3, size=15584 bytes, created 1/14/2002 9:07:50 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 22:00:59 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 22:00:59 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
@jookycola - was just passing.. ..the last section of your logfile is all screwy, the format has gone to pot but i picked out a few problems - - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory - get decent media, see this - 'fraid i don't do coasters.. as per my signature, decent media is all that goes near my burner..