my mpeg files will not go on the dvd-r

Discussion in 'DVDR' started by celtic200, May 1, 2005.

Thread Status:
Not open for further replies.
  1. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    can someone please help???

    when i am using nero and i am trying to put my mpeg movies on a dvd-r nero just says burning failed and i dont know who i have burned mpeg files onto a dvd-r before but it has stopped working can someone please help plz plz plz????

    i am really sorry if this is in the wrong place or has already been asked!!
     
    Last edited: May 1, 2005
  2. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    Nero can make a log file at the end of a burn. Did you save yours? If so can you post it so we can see what the actual error message is?

    Be sure to edit out your Nero S/N before posting.

    Are you converting your mpegs to DVD-Video files or just burning the mpegs?
     
  3. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    i'm just burning mpeg files
    sorry it took so long i am using a pioneer [bold]dvd-rw drv-109[/bold]

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.8
    Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <ATAPI CD-RW 52XMax >Version: 160D - HA 0 TA 1 - 6.6.0.8
    Adapter driver: <nvatabus> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : ATAPI CD-RW 52XMax nvatabus Port 0 ID 1 DMA: Off

    === CDRom-Device-Map ===
    ATAPI CD-RW 52XMax E: CDRom1
    PIONEER DVD-RW DVR-109 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523764kB)
    Free physical memory: 169MB (173832kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.5.2005
    ISO compilation
    21:44:22 #1 Text 0 File Isodoc.cpp, Line 6172
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    21:44:22 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    21:44:22 #3 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-109 running

    21:44:22 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    21:44:22 #5 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    21:44:23 #6 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2273135 (505:08.35, 4439MB)

    21:44:23 #7 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    21:44:23 #8 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    21:44:23 #9 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:44:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2273136 (2273136) = #2273136/505:8.36
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2273136 blocks [PIONEER DVD-RW DVR-109]
    --------------------------------------------------------------

    21:44:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4655382528, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2273136 | lead-out | 1 | 0x41 | 0x00

    21:44:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    21:44:23 #13 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    21:44:23 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    21:44:23 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 6x (8,310 KB/s)

    21:44:23 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:44:23 #17 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode

    21:44:23 #18 Text 0 File Mmc.cpp, Line 21235
    Set BUFE: Buffer underrun protection -> ON

    21:44:23 #19 Text 0 File DVDR.cpp, Line 2340
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:44:23 #20 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    21:44:29 #21 Text 0 File Cdrdrv.cpp, Line 1287
    21:44:29.265 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later

    21:45:11 #22 SCSI -1183 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03840000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x08 (KEY_BLANK_CHECK)
    Sense Code: 0x00
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF1 0x00 0x08 0xFF 0xFF 0x04 0x50 0x0E
    0x00 0x00 0x00 0x00 0x00 0x00

    21:45:11 #23 CDR -1183 File Writer.cpp, Line 311
    Blank check command error
    PIONEER DVD-RW DVR-109\H1 T0

    21:45:11 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:45:11 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    21:45:11 #26 Text 0 File DVDR.cpp, Line 2603
    EndDAO: Last written address was 767

    21:45:11 #27 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 6x (8,310 KB/s)


    Existing drivers:
    File 'Drivers\nvatabus.sys': Ver=5.10.2600.0340 built by: WinDDK, size=52608 bytes, created 21/04/2003 07:18:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    Last edited: May 2, 2005
  4. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66

    Try this:
    Remove Nero then download and install the latest vesion:

    http://nero.com/us/nero-up.php

    Run the Registry Checker and DriverClean tools as well:

    http://nero.com/us/Clean_Tools.html

    If you have anything that you have burned before, try burning it again. We need to figure out if your mpegs are the problem or if Nero is just messing up. Has anything changed in your system since you started having this problem?



     
  5. LivnDGirl

    LivnDGirl Regular member

    Joined:
    Dec 30, 2004
    Messages:
    186
    Likes Received:
    0
    Trophy Points:
    26
    Suspect your media - looks like it's not sensed to me from the log file.
    Could be one bad disk.

    Also enable DMA !!
     
    Last edited: May 2, 2005
  6. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116

    Might help if the files were DVD compatible -

    When they say Mpeg, it sounds like a partially rendered downloaded file that needs a bout with TMPGEnc DVD Author in order to work – something to check -

    Defiantly need some DMA on -

    Divice manager, uninstall DVD burner - reboot PC to allow it to find the drive, install it and set it to DMA Transfer mode.

    Please, Keep your media Ritek G05's are about as good a media as one could ask for . . .
     
  7. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    Oops I missed the DMA whilst looking at a "Blank Check" error.:O

    I compared my burn log from this Nero Version to his:

    Mine:
    Nero Version: 6.6.0.8
    Recorder:<PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 1 -6.6.0.8
    Adapter driver: <atapi> HA 1 Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD-ROM DDU1612 >Version: DYS1 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <atapi> HA 1


    celtic200:

    Nero Version: 6.6.0.8
    Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <ATAPI CD-RW 52XMax >Version: 160D - HA 0 TA 1 - 6.6.0.8
    Adapter driver: <nvatabus> HA 0

    I think that not only does DMA need enabled but that possibly a uninstall of the IDE/ATAPI controllers and a reboot may be in order.

    Also maybe a problem with NVidia drivers? Tried Googling "nvatabus" and there seems to be a lot of issues with this.
    Opinions?
     
    Last edited: May 2, 2005
  8. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    [bold]my mpeg files are good because i have put the on CD with my cd burner[/bold]


    i will try what u have suggested and i will tell u the result
     
    Last edited: May 3, 2005
  9. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    what is DMA and how do i enable DMA transfer mode? i didnt get an installation disk with my burner. i tryed installing a newer nero but it is still failing to burn.
     
  10. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116
    Go to Device Manager - DVD / CD ROM Drives - right-click your drive - uninstall - Ok, OK to reboot, then your PC will find the drive and reset it to DMA OR Ultra DMA transfer Mode during installition.

    Cheers,

    Pete
     
  11. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    i cant find a device manager on my pc
     
  12. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    I have done everything every1 has suggested but it still does not work i think it might be my driver. it is from 2001 does anyone no where i could download a new one. the only thing i didnt do was set my burner it DMA transfer mode because i didnt know how cause when i uninstalled the burner it reinatalled its self i didnt have to do anything and was not able to change anything.
     
    Last edited: May 4, 2005
  13. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116
    celtic200,

    Device Manager = Right-click My Computer - click, Properties - click, Hardware - click, Device Manager - DVD / CD ROM drives, right-click your burner, uninstall. - click -OK then all OK's to reboot your PC (Ignore all warnings). When your PC reboots it will re-install your drive and re-set the drive to DMA. Trust me, this works !

    Cheers,

    Pete
     
  14. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    i have done it and it still wont work
     
  15. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,097
    Likes Received:
    0
    Trophy Points:
    116
    Try going to Control Panel and looking for "System". Then Properties and go from there.

    I don't ever remember any system that didn't have Device Manager.

    We'll find it somehow - Lol

    Cheers,
     
  16. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    i found it, done what u said but it still doesnt work here is the error log:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.12
    Internal Version: 6, 6, 0, 12c

    Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-RW DVR-109 >Version: 1.40 - HA 1 TA 0 - 6.6.0.12
    Adapter driver: <> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : ATAPI CD-RW 52XMax nvatabus Port 0 ID 1 DMA: Off

    === CDRom-Device-Map ===
    ATAPI CD-RW 52XMax E: CDRom1
    PIONEER DVD-RW DVR-109 D: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523764kB)
    Free physical memory: 171MB (175144kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.5.2005
    ISO compilation
    12:19:24 #1 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:19:24 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    12:19:24 #3 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-109 running

    12:19:24 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    12:19:24 #5 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    12:19:45 #6 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2273135 (505:08.35, 4439MB)

    12:19:45 #7 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    12:19:45 #8 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    12:19:45 #9 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:19:45 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2273136 (2273136) = #2273136/505:8.36
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2273136 blocks [PIONEER DVD-RW DVR-109]
    --------------------------------------------------------------

    12:20:03 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4655382528, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2273136 | lead-out | 1 | 0x41 | 0x00

    12:20:03 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    12:20:03 #13 Text 0 File Burncd.cpp, Line 4037
    Cache writing successful.

    12:20:03 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    12:20:03 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    12:20:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:20:03 #17 Text 0 File DVDR.cpp, Line 2258
    Recording mode: Sequential Recording Mode for Multisession

    12:20:03 #18 Text 0 File Mmc.cpp, Line 21356
    Set BUFE: Buffer underrun protection -> ON

    12:20:03 #19 Text 0 File DVDR.cpp, Line 2412
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:20:03 #20 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:20:08 #21 Text 0 File Cdrdrv.cpp, Line 1288
    12:20:08.796 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later

    12:20:20 #22 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AF0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0x03 0xE0 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00

    12:20:20 #23 CDR -1135 File Writer.cpp, Line 311
    Write error

    12:20:20 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:20:20 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    12:20:21 #26 Text 0 File DVDR.cpp, Line 2649
    EndDAO: Last written address was 767

    12:20:24 #27 Phase 133 File dlgbrnst.cpp, Line 1832
    Writing short lead-out

    12:20:24 #28 SCSI -1176 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x72 0x04

    12:20:24 #29 CDR -1176 File WriterStatus.cpp, Line 167
    Session fixation error

    12:20:24 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    12:20:24 #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  17. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    You have to let us know if you were able to complete the process. If you had enabled DMA then that would show in your burn log. Which it doesn't. So at some point during the process of enabling, something went wrong or you did not complete the process.

    I will attempt to give you a detailed guide:

    Start then Right click "My Computer" and select properties from the menu.

    Click "Hardware"

    Click "Device Manager"

    This opens a nice list of items on your computer. Look for the one that says "IDE ATA/ATAPI controllers. It should have a small box just to left with a + in it.

    Click on the + in the box to expand this item.

    Now you should see some entries appear. The ones you are interested in are the Primary IDE Channel and the Secondary IDE Cannel.

    Lets check the Primary IDE Channel first. This is the channel your hard drive is usually connected to so it is important.

    Double click the Primary IDE channel. This opens your Priomary IDE Channel Properties menu.

    Click the Advanced Settings tab.

    Here is where you can now change the "Transfer Mode" to "DMA if available". You should see the Current Transfer Mode just below the Transfer Mode menu. Yours should say PIO. Change it to DMA.

    Do this for each device on the Primary IDE channel. You should have only one device on your Primary IDE channel, your hard drive.

    Your burner and ROM should be connected to the secondary IDE Buss.

    Lets check them next.

    Close the Primary IDE Channels Properties menu.

    Double click the Secondary IDE Channel in Device Manager.

    Select the Advanced Settings tab.

    Just as you did with the Primary IDE Channel, set the transfer mode for device 0 and device 1 to DMA if available.

    That is all there is to it. Close everything and reboot your PC.

    Please follow these steps. If you have a problem with setting your DMA, Let us know at which step it failed to work as descrbed. The point of all this is to provide a map so we know for sure that you actually got to where you needed to go to enable DMA.








     
  18. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    what dma mode multi-word dma or ultra ???
     
  19. celtic200

    celtic200 Member

    Joined:
    Apr 18, 2005
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    11
    this is my error log now:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.8
    Recorder: <PIONEER DVD-RW DVR-109> Version: 1.40 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-RW DVR-109 >Version: 1.40 - HA 1 TA 0 - 6.6.0.8
    Adapter driver: <> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : ATAPI CD-RW 52XMax nvatabus Port 0 ID 1 DMA: Off

    === CDRom-Device-Map ===
    ATAPI CD-RW 52XMax E: CDRom1
    PIONEER DVD-RW DVR-109 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523764kB)
    Free physical memory: 237MB (243264kB)
    Memory in use : 53 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.5.2005
    ISO compilation
    21:31:33 #1 Text 0 File Isodoc.cpp, Line 6172
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    21:31:33 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    21:31:33 #3 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-109 running

    21:31:33 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    21:31:33 #5 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    21:31:52 #6 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2273135 (505:08.35, 4439MB)

    21:31:52 #7 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO (enabled: CD)

    21:31:52 #8 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    21:31:52 #9 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:31:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2273136 (2273136) = #2273136/505:8.36
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2273136 blocks [PIONEER DVD-RW DVR-109]
    --------------------------------------------------------------

    21:31:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4655382528, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2273136 | lead-out | 1 | 0x41 | 0x00

    21:31:55 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Unknown BurnPhase

    21:31:55 #13 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    21:31:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Unknown BurnPhase

    21:31:55 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Unknown BurnPhase

    21:31:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:31:55 #17 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode for Multisession

    21:31:55 #18 Text 0 File Mmc.cpp, Line 21235
    Set BUFE: Buffer underrun protection -> ON

    21:31:55 #19 Text 0 File DVDR.cpp, Line 2340
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:31:55 #20 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    21:31:57 #21 Text 0 File Cdrdrv.cpp, Line 1287
    21:31:57.093 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later

    21:33:15 #22 SCSI -1128 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02F90000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0x04 0x50 0x0E
    0x00 0x00 0x00 0x00 0x11 0x05

    21:33:15 #23 CDR -1128 File Writer.cpp, Line 311
    Unknown CDR error

    21:33:15 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:33:15 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    21:33:15 #26 Text 0 File DVDR.cpp, Line 2603
    EndDAO: Last written address was 767

    21:33:15 #27 Phase 133 File dlgbrnst.cpp, Line 1832
    Unknown BurnPhase

    21:33:15 #28 SCSI -1176 File Cdrdrv.cpp, Line 1181
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x72 0x04

    21:33:15 #29 CDR -1176 File WriterStatus.cpp, Line 167
    Unknown CDR error

    21:33:15 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    -24 Unknown error

    21:33:16 #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Unknown BurnPhase


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  20. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    Your DMA is still not enabled:

    DiskPeripheral : Maxtor 6Y080L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : ATAPI CD-RW 52XMax nvatabus Port 0 ID 1 DMA: Off

    This is an obvious problem that you need to get resolved before doing anything else. Did you do the steps I gave you?

    Other problems:


    It looks like you are trying to burn a data disc. :

    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession

    21:44:23 #17 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode

    Do you want your DVD to play in a DVD player or just your computer?

     
Thread Status:
Not open for further replies.

Share This Page