Hi I bought a new dvd reader as my old one would not rip a copy,kept getting errors [cyclic redundancy error with shrink,and i/o error with decrypter. My new reader was fine for a couple of days ripping anything , even some discs which were in a pretty bad way,but now i'm getting the error again,even copied from hdd to a new disc [datawrite red] and would'nt rip from the new copy either,also tried a mirror disc perfect copy but get error when i try to rip my new copy also,ps. i can rip any original dvd no problem.here's my decrypter message I/O Error Device [0:1:0]JLMS XJ-HD166S DSIA (f ScsiStatus: 0x02 interpretation: check condition CDB: 28 00 00 0A 29 28 00 00 01 00 Interpretation: Read (10) - Sector:665896 Sense area: 70 00 03 00 00 00 00 0A 00 00 00 00 11 06 00 00 00 00 Interpretation:CIRC Unrecovered error Hope you can help,Thanx guys.
Hiya dougal58, Looks like a media error to me!! Either: 1 - the media is no good (datawrite red) 2 - the media is not really compatible with your burner 3 - your burner needs a lens cleaning 4 - your burner is on the blink 5 - you are burning way too fast for the burner/media combination 6 - Windows is hosed!! Almost ALL CRC errors are caused by one or more of the above. Have Fun...
drchips,thanx for your quick response,my burner is only 2 weeks old and only burned about 6 dvd's all burn perfect, datawrite red is perfect playback,even when i copy a disc and immediately try to rip the copy which has,nt been anywhere or been played i get the errors, my reader is also only a week old, any checks i could do in windows that you know of? everything was fine yesterday.thanx.
Thanx herbsman, do you think the real problem is the media, where is the best place online to order ritek GO4? is there anything i can check on my system just in case,and i read before about turning everything off,do i use msconfig or task manager? Thanx again.
When I was getting (cyclic redundancy error with shrink,and i/o error with decrypter)it was because i had a bad original, although it didn't look like it, it does have a scratch somewhere. good luck
Hiya, But do you perform a verify as part of the burn procedure? I ALWAYS DO, it adds time to the whole process, but what use is a burn that cannot be accessed correctly?? Have Fun...
dougal58: Depends on which country you're in mate If in U.K. though , I recommend http://www.blankdiscshop.co.uk RiDisc / RiData / Arita etc ... there are quite a few brands that use the Ritek G04 dye : ]-~ As [bold]drchips[/bold] has quite rightly stated you can always do a verify on your burn , does take 10-15 mins extra ... but hey that way you know you have a successful back up (personally I only use it to verify data DVDRs I burn , using Bulkpaq Orange). I use G04 discs for DVD-Video & trust them not to have any errors ... 99% of the time my trust is well placed
Thanx everybody, drchips, i will try another disc and use verify will let you know how i get on,thanx herbsman, i'm in uk so i will get some decent discs at your suggestion and let you know how i get on. THANX GUYS.
Hi again, Heeeelp.Just copied a disc copied fine no problems,then when it started to verify this is what i got,any ideas? I/O Error Device:[1:0:0]DVDRW IDE1008 0256 (G ScsiStatus:0x02 Interpretation:check condition CDB:28 00 00 02 69 15 00 00 01 00 Interpretation:Read(10)-Sector:157973 Sense Area:70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 00 Interpretation :Illegal Mode For This Track Cheers.
Oh dear!!! A BTC writer.... AND suspect media.... AND Nero settings suspect... Not a happy combo _X_X_X_X_X_[small]Life is just more of the same:[/small]
Hiya, When it comes to Nero, you would be a lot better off with Herbsman guiding you (I use Nero for everything BUT DVDs). This points towards a setting in Nero being suspect (or you are choosing the wrong mode). Hopefully Herbs will pick this up. Good Luck...
Okay here I am ! : ) Dougal , explain to me what you're trying to copy & how. And if you are able , tell me how the original back up was done. Also what settings & modes you use to burn DVD-Video... Give as much info as humanly possible mate
Hi herbsman, I first copied peter kay live using only decrypter,no compression required,ripped in iso mode,write in iso mode,my decrypter settings are set according to doom9s guide,i'm using btc dvdrw x8 writer,and lite-on it reader,both brand new,i can rip any of my original dvd's no problems whatsoever,i have basically been copying some of my originals for my daughters,i could copy any copies a couple of days ago so i don't understand what's gone wrong,when decrypter starts ripping i am getting reading speeds of anything up to 11x,even copies i have copied before don't copy now.i read somewhere about turning everything off where do i turn everything off? msconfig or task manager?even though i did'nt have to turn everything off before. i'm using windows xp. fairly new machine good spec. i've tried shrink also getting error messages from there. drchips said something about nero not being configured properly,which is probably right but that should'nt affect the ripping process should it? aAll help appreciated herbsman.THANX MAN.
Have a read here firstly Dougal to see if any other BTC DRW 1008IM (which should be yours , as you stated X8 write speed availability) http://www.dvdrhelp.com/dvdwriters.php?DVDnameid=172&Search=Search&list=0#comments example: Comments posted by James Ryan, February 20, 2004 Think it's best we check that hardware is working correctly before we blame any software ;-) HERBs [edited the URL cos it came up unavailable for specific page , so changed it to homepage...] _X_X_X_X_X_[small] Afterdawn Guides: http://www.afterdawn.com/guides/ Afterdawn Rules: http://forums.afterdawn.com/thread_view.cfm/6346[/small]
Hi HERBs. I Have'nt got a problem with my writer at all,It writes perfect the only trouble i have is getting the iso ripped to my hdd with my reader,followed the link to via drivers but don't see what to download,but as i say my writer works fine. CHEERS MATE.
Hiya guys, Not according to this post, doing a burn/verify - the READING device is the DVDRW IDE1008 !!!!!!!! According to that report from Nero, the BTC is not reading wot it just wrote <me hanging around to watch herbs do the Nero magic, so I can learn summat> Byeeee...
