need help with burn errors

Discussion in 'DVDR' started by Yukanuba, Jun 28, 2006.

  1. Yukanuba

    Yukanuba Member

    Joined:
    Jun 28, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hello,
    Can someone please help me correct burn errors with Nero or lead me in the right direction? I have been running a movie in Nero Vision and when it starts to burn I get an error about a minute later. I have already removed the old version of Nero, did a clean up, and reinstalled Nero 7.0.8.2 and still having trouble. Any suggestions? Thank you in advance for your time.
     
    Yukanuba, Jun 28, 2006
    #1
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Hi Yukanuba
    Welcome to ad
    What error are you receiving?
    You can also post your last Nero log and we can take a look at what's going on.
    They can be found at: program files>Nero>Nero 7>Core>NeroHistory.
    Just be sure to edit out your serial # - they begin w/ 1A, 1C or 5C.
     
    binkie7, Jun 29, 2006
    #2
  3. Yukanuba

    Yukanuba Member

    Joined:
    Jun 28, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I hope I did this right.....seems like an awful lot. Once again, Thank you in advanced.....Here it is.....


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 119MB (122176kB)
    Memory in use : 75
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    UDF/ISO compilation
    1:09:11 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    1:09:11 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    1:09:11 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    1:09:11 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    1:09:11 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    1:09:11 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    1:09:11 PM #7 Text 0 File Writer.cpp, Line 113
    Writer F: NU DVDRW DDW-061 running

    1:09:14 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    1:09:14 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    1:09:14 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    1:09:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267951 (503:59.26, 4429MB)

    1:09:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    1:09:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    1:09:28 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

    1:09:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
    --------------------------------------------------------------

    1:09:29 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267952 | lead-out | 1 | 0x41 | 0x00

    1:09:29 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    1:09:29 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    1:09:29 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    1:09:29 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    1:09:29 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 4x (5,540 KB/s)

    1:09:29 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:09:29 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x04810200: Len x804

    1:09:29 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x04872c00: Len x2

    1:09:29 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:09:36 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
    Buffer x03400000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    1:09:36 PM #27 CDR -1135 File Writer.cpp, Line 302
    Write error
    F: NU DVDRW DDW-061

    1:09:36 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:09:37 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    1:09:37 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

    1:09:37 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
    Generating DVD high compatibility borders

    1:09:37 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
    Generating DVD borders completed successfully

    1:09:37 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x04872c00: Len x2

    1:09:37 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 5MB (5608kB)
    Memory in use : 98
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    UDF/ISO compilation
    1:10:06 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    1:10:06 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    1:10:06 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    1:10:06 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    1:10:06 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    1:10:06 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    1:10:06 PM #7 Text 0 File Writer.cpp, Line 113
    Writer F: NU DVDRW DDW-061 running

    1:10:06 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    1:10:06 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    1:10:06 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    1:10:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267951 (503:59.26, 4429MB)

    1:10:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    1:10:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    1:10:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:10:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
    --------------------------------------------------------------

    1:10:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267952 | lead-out | 1 | 0x41 | 0x00

    1:10:07 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    1:10:07 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    1:10:07 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    1:10:07 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    1:10:07 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 6x (8,310 KB/s)

    1:10:07 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:10:07 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x038e3600: Len x804

    1:10:07 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x04872c00: Len x2

    1:10:07 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:10:23 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
    Buffer x03400000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    1:10:23 PM #27 CDR -1135 File Writer.cpp, Line 302
    Write error
    F: NU DVDRW DDW-061

    1:10:23 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:10:25 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    1:10:25 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

    1:10:25 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
    Generating DVD high compatibility borders

    1:10:26 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
    Generating DVD borders completed successfully

    1:10:26 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x04872c00: Len x2

    1:10:26 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 6x (8,310 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 193MB (198108kB)
    Memory in use : 59
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    UDF/ISO compilation
    1:11:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    1:11:51 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    1:11:51 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    1:11:51 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    1:11:52 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    1:11:52 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    1:11:52 PM #7 Text 0 File Writer.cpp, Line 113
    Writer F: NU DVDRW DDW-061 running

    1:11:52 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    1:11:52 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    1:11:52 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    1:11:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267951 (503:59.26, 4429MB)

    1:11:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    1:11:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    1:11:52 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:11:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
    --------------------------------------------------------------

    1:11:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267952 | lead-out | 1 | 0x41 | 0x00

    1:11:52 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    1:11:52 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    1:11:52 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    1:11:52 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    1:11:52 PM #21 Phase 28 File dlgbrnst.cpp, Line 1724
    Speed measurement started

    1:11:52 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:13:43 PM #23 Text 0 File WriterStatus.cpp, Line 116
    <F: NU DVDRW DDW-061> start writing Lead-Out at LBA 2267952 (229B30h), length 0 blocks

    1:13:43 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:13:43 PM #25 Phase 29 File dlgbrnst.cpp, Line 1673
    Speed measurement completed: 30.2x (41,762 KB/s)

    1:13:43 PM #26 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 6x (8,310 KB/s)

    1:13:43 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:13:43 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x038e7200: Len x804

    1:13:43 PM #29 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x03887000: Len x2

    1:13:43 PM #30 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:13:51 PM #31 SPTI -1064 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 03 A0 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21
    Buffer x03430000: Len x10000
    0x00 00 01 BA 44 00 44 D6 DD 01 01 89 C3 F8 00 00
    0x01 C0 04 88 81 80 05 21 00 11 57 25 2E D1 CD 27
    0xEB 38 9D 52 E3 A9 17 4E 71 94 E2 AE 8A E8 92 42

    1:13:51 PM #32 CDR -1064 File Writer.cpp, Line 302
    Invalid block address
    F: NU DVDRW DDW-061

    1:13:51 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:13:51 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    1:13:53 PM #35 Phase 127 File dlgbrnst.cpp, Line 1724
    Generating DVD high compatibility borders

    1:13:53 PM #36 Phase 129 File dlgbrnst.cpp, Line 1724
    Generating DVD borders completed successfully

    1:13:53 PM #37 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x03887000: Len x2

    1:13:53 PM #38 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 6x (8,310 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 168MB (172844kB)
    Memory in use : 64
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    CueSheet
    3:24:05 PM #1 Text 0 File Burncd.cpp, Line 3007
    NU DVDRW DDW-061
    Seamless Link activated

    3:24:05 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    3:24:05 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    3:24:05 PM #4 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using CD-R/RW media

    3:24:13 PM #5 Phase 40 File dlgbrnst.cpp, Line 1724
    Aborted by user

    3:24:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 359845 ( 79:59.70)
    Last address to be written: 362963 ( 80:41.38)

    3:24:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    3:24:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061
    Medium not present

    3:24:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Not enough free discspace.
    (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 89MB (91652kB)
    Memory in use : 81
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    UDF/ISO compilation
    6:36:26 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    6:36:26 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    6:36:26 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:36:26 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    6:36:26 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    6:36:26 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    6:36:26 PM #7 Text 0 File Writer.cpp, Line 113
    Writer F: NU DVDRW DDW-061 running

    6:36:26 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    6:36:26 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    6:36:26 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    6:37:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267951 (503:59.26, 4429MB)

    6:37:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    6:37:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    6:37:04 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Compilation cannot be written on that medium type.
    (Medium in drive: CD-R. Medium required by compilation: DVD+R/RW.)

    6:37:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
    --------------------------------------------------------------

    6:37:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267952 | lead-out | 1 | 0x41 | 0x00

    6:37:04 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    6:37:05 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    6:37:05 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    6:37:05 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    6:37:05 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 2.4x (3,324 KB/s)

    6:37:05 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:37:05 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x049a4600: Len x804

    6:37:05 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x003d5200: Len x2

    6:37:05 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:37:07 PM #26 SPTI -1064 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21
    Buffer x03390000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    6:37:07 PM #27 CDR -1064 File Writer.cpp, Line 302
    Invalid block address
    F: NU DVDRW DDW-061

    6:37:07 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:37:07 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    6:37:07 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

    6:37:07 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
    Generating DVD high compatibility borders

    6:37:07 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
    Generating DVD borders completed successfully

    6:37:07 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x003d5200: Len x2

    6:37:07 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 89MB (91816kB)
    Memory in use : 81
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    UDF/ISO compilation
    6:37:29 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    6:37:30 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    6:37:30 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:37:30 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    6:37:30 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    6:37:30 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    6:37:30 PM #7 Text 0 File Writer.cpp, Line 113
    Writer F: NU DVDRW DDW-061 running

    6:37:30 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    6:37:30 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    6:37:30 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    6:37:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267951 (503:59.26, 4429MB)

    6:37:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    6:37:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    6:37:46 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

    6:37:46 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
    --------------------------------------------------------------

    6:37:46 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267952 | lead-out | 1 | 0x41 | 0x00

    6:37:46 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    6:37:46 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    6:37:46 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    6:37:46 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    6:37:46 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 2.4x (3,324 KB/s)

    6:37:46 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:37:46 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x03875600: Len x804

    6:37:46 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x003d5200: Len x2

    6:37:46 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:37:47 PM #26 SPTI -1064 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21
    Buffer x033a0000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    6:37:47 PM #27 CDR -1064 File Writer.cpp, Line 302
    Invalid block address
    F: NU DVDRW DDW-061

    6:37:47 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:37:47 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    6:37:47 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

    6:37:47 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
    Generating DVD high compatibility borders

    6:37:47 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
    Generating DVD borders completed successfully

    6:37:47 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x003d5200: Len x2

    6:37:47 PM #34 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 150MB (153932kB)
    Memory in use : 68
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.6.2006
    CueSheet
    6:43:27 PM #1 Text 0 File Burncd.cpp, Line 3007
    NU DVDRW DDW-061
    Seamless Link activated

    6:43:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    6:43:27 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    6:43:27 PM #4 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using CD-R/RW media

    6:43:33 PM #5 Phase 40 File dlgbrnst.cpp, Line 1724
    Aborted by user

    6:43:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 359845 ( 79:59.70)
    Last address to be written: 362963 ( 80:41.38)

    6:43:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    6:43:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061
    Medium not present

    6:43:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Not enough free discspace.
    (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 83MB (85436kB)
    Memory in use : 82
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.6.2006
    UDF/ISO compilation
    12:01:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    12:01:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    12:01:42 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    12:01:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    12:01:42 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    12:01:42 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    12:01:42 PM #7 Text 0 File Writer.cpp, Line 113
    Writer F: NU DVDRW DDW-061 running

    12:01:42 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:01:42 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:01:42 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    12:01:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2267951 (503:59.26, 4429MB)

    12:01:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    12:01:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    12:01:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:01:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2267952 (2267952) = #2267952/503:59.27
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267952 blocks [F: NU DVDRW DDW-061]
    --------------------------------------------------------------

    12:01:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: NU DVDRW DDW-061] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644765696, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2267952 | lead-out | 1 | 0x41 | 0x00

    12:01:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:01:43 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    12:01:43 PM #19 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    12:01:43 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    12:01:43 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 6x (8,310 KB/s)

    12:01:43 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:01:43 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x048f9e00: Len x804

    12:01:43 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x003d5200: Len x2

    12:01:43 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:02:06 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 45 40 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
    Buffer x04ce0000: Len x10000
    0x00 00 01 BA 44 07 E6 B6 DD 01 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 7A 6E A4 6F D5 8E 91 90 A1
    0x4B 69 AD AA CA 25 8A 63 EA 5F 25 55 57 1D 34 BE

    12:02:06 PM #27 CDR -1135 File Writer.cpp, Line 302
    Write error
    F: NU DVDRW DDW-061

    12:02:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:02:06 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    12:02:19 PM #30 Phase 127 File dlgbrnst.cpp, Line 1724
    Generating DVD high compatibility borders

    12:02:19 PM #31 Phase 129 File dlgbrnst.cpp, Line 1724
    Generating DVD borders completed successfully

    12:02:19 PM #32 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF3 0E 71 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
    Buffer x003d5200: Len x2

    12:02:19 PM #33 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 6x (8,310 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 150MB (154468kB)
    Memory in use : 68
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.6.2006
    UDF/ISO compilation
    12:02:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    12:02:41 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    12:02:41 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    12:02:41 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    12:02:41 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    12:02:41 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    12:02:41 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:02:41 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:02:41 PM #9 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    12:03:08 PM #10 Phase 40 File dlgbrnst.cpp, Line 1724
    Aborted by user

    12:03:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    12:03:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    12:03:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2/20/2006 8:34:03 AM
    ahead WinASPI: File 'D:\Documents and Settings\Mel\Nero\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <NU DVDRW DDW-061> Version: BX03 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600BB-00DWA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : NU DVDRW DDW-061 atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : HJ1311Z NNK123Y 1.0 dtscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B E: CDRom0
    NU DVDRW DDW-061 F: CDRom1
    HJ1311Z NNK123Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 151MB (155176kB)
    Memory in use : 68
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.6.2006
    UDF/ISO compilation
    12:03:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation started

    12:03:15 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
    DVD-Video files reallocation completed (no file modified)

    12:03:15 PM #3 Text 0 File Isodoc.cpp, Line 6410
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    12:03:15 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
    DVD-Video files sorted

    12:03:15 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 68608KB of Memory

    12:03:15 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    12:03:15 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:03:15 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    12:03:15 PM #9 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    12:04:04 PM #10 Phase 40 File dlgbrnst.cpp, Line 1724
    Aborted by user

    12:04:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    12:04:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: NU DVDRW DDW-061, Media type: DVD+R

    12:04:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2/20/2006 8:34:03 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======
     
    Yukanuba, Jun 29, 2006
    #3
  4. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Sorry I should have told you the logs are separated by this:
    ====== *** Nero Burning ROM, History File *** ======

    But scanning thru all of them the burning errors remain pretty consistent for the DVD's & CD's you've tried.

    Another thing is your memory in use in some logs gets quite low so whening encoding & burning no multitasking and shut down unnecessary processes.

    All the logs also show you're using 7.0 not 7.0.8.2. The last log is from 6/27. Have you updated since then?
    Your firmware is a bit behind the latest is BX32. This will help your drive with the write/read strategies of media.
    Here's a link:
    http://forum.rpc1.org/dl_firmware.php?download_id=1690
    Your drive only see the media as +r. A firmware may help this but the last update on this drive was 5/2004.
    What brand of media are you using and what's the rated burn speed? exp. like Verbatim 8x
    Turn DMA mode back on for this drive. Here's a link:
    http://forums.afterdawn.com/thread_view.cfm/260038

    Since the max burn speed on this drive is 6x - I would try 4x or lower. I see you've tried different ones w/o success but hopefully the firmware may take care of burn errors.
     
    binkie7, Jun 29, 2006
    #4

Share This Page