I keep having problems with DVD shrink and nero combo. It seems no matter what I do I wind up with these stupid coasters. I have wasted more money in DVD's than my burner is worth. The most recent error is posted below,..can anyone help!!?? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 200j> Version: 1.06 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : ST94811A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY CDRW/DVD CRX830E atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY CDRW/DVD CRX830E D: CDRom0 HP DVD Writer 200j E: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 177MB (182112kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.11.2006 NeroAPI 9:32:11 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 9:32:11 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 9:32:11 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 9:32:11 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 9:32:11 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:32:11 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 200j running 9:32:11 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:32:11 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:32:11 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:32:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 9:32:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 9:32:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 200j, Media type: DVD+R 9:32:12 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:32:12 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HP DVD Writer 200j] -------------------------------------------------------------- 9:32:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 9:32:12 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 9:32:12 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 9:32:12 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 9:32:12 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 9:32:12 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x02AC6600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 9:32:12 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:32:12 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04AD0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 9:32:12 PM #23 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 9:32:12 PM #24 Text 0 File DVDR.cpp, Line 6168 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 9:32:12 PM #25 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 9:32:12 PM #26 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 9:38:37 PM #27 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x01600000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x90 Sense Qual: 0x92 CDB Data: 0x2A 0x00 0x00 0x08 0xB5 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x08 0xB2 0xC0 0x0C 0x00 0x00 0x00 0x00 0x90 0x92 9:38:37 PM #28 CDR -400 File Writer.cpp, Line 311 Unspecified target error 9:38:37 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:38:37 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:39:38 PM #31 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 9:39:38 PM #32 Text 0 File DVDR.cpp, Line 6168 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 9:39:39 PM #33 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 9:39:39 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 9:39:39 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi hokiedoc What media are you using? Like Sony +R 8x? All your drive sees is this:Media type: DVD+R A firmware up date may help - here's a link: http://h10025.www1.hp.com/ewfrf/wc/...=en&cc=us&lang=en&os=228&product=81683&dlc=en But the last update on this drive was over 2-1/2 year ago so if you are using newer media like 16x or lower quality can be the reason you see alot of these in the log: SCSI_TASTATUS_CHKCOND
I was using memorex but was told it was bad media so I switched to Sony. I keep getting errors though. Any other ideas?
Did you try updating your firmware? Sony is good media but this is an older drive that may have problems with newer media. What's the rated burn speed - you'll see something on the package like 1-16x or similar. For this drive I would try 8x or under rated media.
I am trying to update my firmware,...having some issues finding my original cd for the burner software. However, the odd thing is that the burns always go until 100% and on closing the disk, it fails. Any ideas? Thanks for helping on this, I was getting really frustrated on my own!
I don't think you need the original cd to update the firmware. You should just be able to dl an .exe file then run it. (just checked the instructions on the link - run the .exe - instructions are included). You need to be connected by a USB hub which it looks like you are. Try reducing the target size in Shrink to 4360. Go to edit>preferences. Pick custom and type in 4360. From the burn above looked like it had a few minutes to go (failed after like 7 mins). No problemo on the help Yeah pc problems can be a pain!! Give those 2 a go and keep us posted!
I went to the link you posted, downloaded it, and when I opened it, it said I had to have the RecordNow program originally downloaded. I have spent 3 hrs on the phone today trying to speak to someone at HP and not once have I spoken with someone in technical support. I have searched the web exhaustively to no avail. I am trying to burn any one of House season II, 24 season II, or Grey's Anatomy season 1 and thus far I have wound up with 0 DVD's, and 7 coasters since Sunday. :-( !!! I have seen several forums where people have just thrown this burner away because it has caused so many problems,...should I just ditch it? Again much thanks.
If it was me - yep I'd ditch. Older drive that only handles +R media and a max burn speed of 4x. You can get a good external like a LiteOn that supports all the new media. Media for it is getting hard to find. Sorry missed the part about Record Now in the firmware update instructions! That would be another reason to get a new drive - easier to update the firmware
I am going to be checking the internet for a new burner,...in the mean time if you want another piece to the puzzle: I was able to find a free version of RecordNow and downloaded it. That enabled me to get the updated firmware for the drive. I had selected the smaller burn size on the previous burn but must have closed it and re-opened DVD shrink and forgot to change it again. However, this is a new burn error,...same disks,...and ideas? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : ST94811A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY CDRW/DVD CRX830E atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY CDRW/DVD CRX830E D: CDRom0 HP DVD Writer 200j E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 103MB (106248kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.11.2006 NeroAPI 10:21:38 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:21:38 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:21:38 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:21:38 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 10:21:38 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:21:38 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 200j running 10:21:38 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:21:38 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:21:38 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:21:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2232879 (496:11.54, 4361MB) 10:21:38 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 10:21:38 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 200j, Media type: DVD+R 10:21:38 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:21:38 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2232880 (2232880) = #2232880/496:11.55 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232880 blocks [HP DVD Writer 200j] -------------------------------------------------------------- 10:21:38 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4572938240, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2232880 | lead-out | 1 | 0x41 | 0x00 10:21:39 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:21:39 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 10:21:39 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:21:39 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:21:39 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:21:39 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09140600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 10:21:39 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 10:21:39 PM #23 Text 0 File DVDR.cpp, Line 6168 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 10:21:39 PM #24 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 10:21:39 PM #25 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 10:22:04 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00CB0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 10:22:04 PM #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 10:22:04 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:22:04 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:22:04 PM #30 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 10:22:04 PM #31 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 10:22:04 PM #32 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 10:22:04 PM #33 Text 0 File DVDR.cpp, Line 6168 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 10:22:04 PM #34 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 10:22:04 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 10:22:04 PM #36 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 10:22:04 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:22:04 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Once you change a setting in Shrink it keeps that as a default so this one did have the target size reduced - you can see it here in the log: Last address to be written: 2232879 (496:11.54, 4361MB) And you're still getting these: SCSI_TASTATUS_CHKCOND. The new one is Illegal disc which basically means the drives firmware doesn't support the media. This burn failure happened sooner than the others - but still pointing to the drive and/or media. Physical memory : 511MB Free physical memory: 103MB Memory in use : 79 % More memory is use this time - keep as much memory free as possible - no multitasking. If you are in the US check out NewEgg for good deals on burners.
