I keep getting a "Disc Error" message right when the burning process is about to finish. When I take out the Blank DVD I'm burning to, I can play it on any DVD Player, but it freezes at about 1:50 into the 2:00 program. This has happened 3 consecutive times, all at about the same point in the process. Please help. Error Log: NT-SPTI used Nero Version: 7.5.1.1 Internal Version: 7, 5, 1, 1 (Nero Express) Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB06 - HA 1 TA 0 - 7.5.1.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CDRW/DVD TSH492B>Version: TB04 - HA 1 TA 1 - 7.5.1.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: Off CdRomPeripheral : TSSTcorp CDRW/DVD TSH492B atapi Port 0 ID 1 DMA: Off DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW SH-S182D D: CDRom0 TSSTcorp CDRW/DVD TSH492B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (522316kB) Free physical memory: 134MB (137964kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.10.2009 DVD-Copy on the fly 5:27:27 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:27:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 72704KB of Memory 5:27:27 PM #3 Text 0 File Reader.cpp, Line 126 Reader running 5:27:27 PM #4 Text 0 File Writer.cpp, Line 123 Writer D: TSSTcorp CD/DVDW SH-S182D running 5:27:27 PM #5 Text 0 File DVDCopy.cpp, Line 316 DVD Track-Information from source disc: Media Type: DVD+R S01 T01 Con 0x14 Start 0 Len 2135072 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 5:27:27 PM #6 Text 0 File DVDCopy.cpp, Line 431 Max -1 tracks of 1 allowed to copy 1: 0 - 2135072 = 2135072, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5:27:27 PM #7 Text 0 File Burncd.cpp, Line 3443 Turn on Disc-At-Once, using DVD media 5:27:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 300 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2135071 (474:27.46, 4170MB) 5:27:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 312 Write in overburning mode: NO (enabled: CD) 5:27:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 2851 Recorder: TSSTcorp CD/DVDW SH-S182D, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 5:27:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 484 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:27:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 863 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2135072 (2135072) = #2135072/474:27.47 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2135072 blocks [D: TSSTcorp CD/DVDW SH-S182D] -------------------------------------------------------------- 5:27:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1079 Prepare recorder [D: TSSTcorp CD/DVDW SH-S182D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4372627456, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2135072 | 2135072 | 0x00 0 | 1 | 1 | 0x41 | 2135072 | 2135072 | 0x00 2135072 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:27:28 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:27:28 PM #15 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 5:27:31 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2746 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:27:31 PM #17 Text 0 File DVDR.cpp, Line 2969 Recording mode: Sequential Recording Mode 5:27:31 PM #18 Text 0 File DVDR.cpp, Line 3125 Start write address at LBA 0 DVD high compatibility mode: Yes 5:27:31 PM #19 Text 0 File Cdrdrv.cpp, Line 9215 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:28:26 PM #20 Text 0 File Cdrdrv.cpp, Line 1290 17:28:26.046 - D: TSSTcorp CD/DVDW SH-S182D : Queue again later 7:10:18 PM #21 SPTI -1047 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 00 00 1B A4 60 00 00 20 00 00 00 Sense Area: 0xF0 00 05 00 00 00 00 0A 00 00 00 00 64 Buffer x0abf0000: Len x10000 7:10:18 PM #22 TRANSFER -25 File Reader.cpp, Line 366 Error reading data 7:10:18 PM #23 Text 0 File Reader.cpp, Line 369 Exception value: -1047 7:11:25 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:11:25 PM #25 Text 0 File DVDR.cpp, Line 3341 EndDAO: Last written address was 1811551 7:11:51 PM #26 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 2/2/2007 3:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/29/2007 3:00:00 AM (Prassi/Veritas driver for win 2K)
Dma is off on both your burners see the guide on here how to enable it,use the search..... CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: Off CdRomPeripheral : TSSTcorp CDRW/DVD TSH492B atapi Port 0 ID 1 DMA: Off DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On Also don't copy on the fly less change off any errors if you copy to the hardrive first 1.10.2009 DVD-Copy on the fly 5:27:27 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
Thanks for your help - I seem to have a problem turning the DMA on. I follow the instructions, but then when I'm done burning, I see that DMA is off.
Can you burn disk's OK now? Check your bios first and make sure dma is enabled in the bios.What make is your motherboard, I've had Nero report in the past that dma was off,even though it was on.Mainly when I've had Asus boards,also with nivida chipset setups.
So far, so good. I don't know how to check the BIOS or how to determine the make of my Motherboard. I have two Primary IDE Channels. One says Device Type: Auto-Detection Transfer Mode: DMA If Available Current Transfer Mode: Not Applicable The other Primary IDE Channel says: Device Type: Auto-Detection (greyed out) Transfer Mode: DMA If Available Current Transfer Mode: PIO Mode (greyed out) I don't have a Secondary IDE Channel. My PC is pretty old as well, at least four years old, probably more. I do a lot of burning and would like to do more Video Editing. Are there any PC's that have a reputation for error-free burning, for people like me who can't figure out what ther errors actually are?
No such thing as Quote Are there any PC's that have a reputation for error-free burning Only if there was,just come here if you run into any problems,plenty of folk willing to help
Forgot to say using good quality disk's is always a good start Verbatim,Ritek what brand of disk's are you using?In your log it says "cmc" I'm sure folk on here say they are rubbish.
Mostly I use Verbatim, but I also buy Maxell and Memorex because they are the only 2 that won't cause any issues with my Panasonic DVD Recorder. If I use any other brand, about a minute into recording the machine will stop and I'll get a "check disk" message. I know Memorex is probably considered pretty low-end, but it is extremely frustrating when you have to record something five times or more before it actually works.
