I have been reading the problems with Nero 7.0 etc. for the last few days. I had upgraded to 6.6 the other day, and then ran into error problems with Shrink in trying to analize the movie. It was suggested that I go back to 6.0 with Shrink, which I did, and it works fine. Yesterday I backed up a Columbia/Sony movie with Shrink and Nero 6.0 to perfection.I was quite surprised. The real question I have is - is it worth to upgrade to 7.0 or higher and still use Shrink? Also, with Nero recode, I don't see Main Movie only listed when I bring the program up. What gives?
I use the first revision of Nero 7 and have yet to update ( I think there have been 3 revisions) with no problems. Nero 6 is still an excellent program...if it ain't broke don't fix it.
@keyrom As locoeng said I'm still using 6 - it fits my needs just fine for now. Hopefully the next update to 6 will correct the shrink autoburn issue. In recode - you should have 5 options in the full version (with an oem package may be different) - the one to do main movie only is 'recode main movie to dvd'.
I went up to 7 and bought it, then went back down to 6. My problem was that my internet started acting funny, I think it is that Scout program they put into it. I disabled it and it got better, but the program still had bugs. Soon as they fix it I will put it back, I spent the money so I might as well use it.
Let me try to explain my situation, and thanks for the responses. I installed Nero 6 Ultra Edition; went to nero start smart; clicked on Nero Recode, and to the right got these three items: Copy entire DVD to DVD Remake a DVD Copy DVD to Nero Digital. There is no main movie section. How and why am I missing this - did something in the installation go wrong?
Thanks Binkie7, but as I am a little confused, I didn't (I don't think) installed package 2; where would I find it, as you said below Ultra Edition Major Update? Is is on the disc I have or somewhere else? Sorry, for the dumbness.
@keyrom Ask & you shall receive You can update package 2 which has recode from nero's website: http://www.nero.com/nero6/enu/nero-up.php The update is under the update for ultra edition. Click off the friggin yahoo toolbar option.
Hello again. I did install package 2 for Nero as you suggested. And when I did my start smart for Nero is gone. It appears that for some reason package 2 eliminated the Start Smart. Do I need to reinstall Nero 6? Or What?
@keyrom, I have seen this: It happens every time you Update Nero Burning Rom first then Vision Express. To solve this. Update Nero Vision Express First, Then Nero Burning Rom. In your case, I would uninstall ALL of Nero, Run Nero's "General Clean tool". Then Re-Install Nero 6 & Nero Vision express. Don't install INCD! Update it this way: Download the 2 Updates Package 1 & 2 (save to desktop) Install the Vision Express update First(package 2), then install the Nero Burning ROM last.(Package 1) You'll be fine.
Does anyone know where to get a download of Nero 6.0 as my 6.6.0.18 version is causing me all sorts of trouble trying to burn with Shrink?
To get start smart back, I would reinstall the updates, package #1 and #2 and make sure the box is checked to put start smart on the desktop.
@bryan28 What kind of problems are you having? Are you not able to select your drives in DVD Shrink? If you have windowblinds or a similar skinning program try disabling it and your options should appear.
This is what i posted earlier today looking for help, but not had a reply yet.. Can anyone please help? Up until about a week ago i was able to burn DVD's ok until i upgraded my Nero. Everything works ok with shrink, then i put in a blank DVD to burn with Nero and i get the following failed burn log. I've unistalled Shrink, then reinstalled. I've used the cleanup tool to remove Nero and then reinstalled (even tried version 7 but read the forum and I see that doesn't work either!). If i use Nero 6.0, will that work? Don't know where to get the download of this from, can't find it anywhere? Wish i hadn't upgraded now!! Is it possible my firmware needs updated? Any help would be much appreciated, here is the log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 18:01:02 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <_NEC DVD_RW ND-2510A> Version: 2.54 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-2510A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 32505856 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 191MB (196080kB) Free physical memory: 64MB (65884kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.2.2006 NeroAPI 21:44:21 #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 21:44:21 #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 21:44:21 #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 21:44:22 #4 Text 0 File Reader.cpp, Line 127 Reader running 21:44:22 #5 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-2510A running 21:44:22 #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 21:44:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 21:44:22 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 21:44:22 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 21:44:48 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 21:44:48 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 21:44:48 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 21:44:48 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 21:44:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 21:44:48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 21:44:53 #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 21:44:53 #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 21:44:53 #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 21:44:53 #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 21:44:53 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:44:53 #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 21:44:53 #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 21:44:53 #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 21:44:53 #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:45:01 #25 Text 0 File Cdrdrv.cpp, Line 1288 21:45:01.234 - _NEC DVD_RW ND-2510A\H1 T1 : Queue again later 21:45:14 #26 SCSI -1106 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00BA0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 21:45:14 #27 CDR -1106 File Writer.cpp, Line 311 Power calibration error 21:45:14 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:45:14 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:45:15 #30 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 21:45:15 #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) 21:45:15 #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 21:45:15 #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 13:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 06/05/2004 01:03:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
THANKS STAN1000 - REINSTALLED PACKAGE 2 AND 1 FOR VISION EXPRESS AND NEROBURNING - STARTSAMRT IS ON aND EVERYTHING SEEMS TO BE ON AND WORKING. THANKS
Bryan28 - last week I wrote regarding the same problem as I upgraded to Nero 6.6 and had been unable to burn from Shrink, and was told that the new upgrades do not support/or work with Shrink. So I uninstalled 6.6 and reinstalled 6.0 and it is working great again. There is nothing wrong with using 6.0 Nero - very stable and gives great burns.
@bryan28 It makes it hard to get a response when you "highjack" a thread. You can get the version from here http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe You posted this in this thread and I REPLIED. http://forums.afterdawn.com/thread_view.cfm/307250 Do NOT double post or highjack threads if you wanr a reply
