I'm trying to burn a DVD movie -- my first -- but Nero refuses to do the job. It'll get to the final stage of the burning process, but then throw up an error message just to annoy me. Initially, I tried burning the DVD after using DVD Shrink only. When that didn't work, I used DVD Decrypter, followed by DVD Shrink, then tried burning again. Still no luck. Here is Nero's logfile. I hope it provides one of the boffins here with some clues as to why the process keeps going awry. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM Nero version: 6.3.1.12 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 1 TA 0 - 6.3.1.12 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVDRAM GSA-4120B>Version: A102 - HA 1 TA 0 - 6.3.1.12 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B atapi Port 1 ID 0 DMA: On CdRomPeripheral : ATAPI CD-RW 52X24 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4120 D: CDRom0 ATAPI CD-RW 52X24 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 479MB (490992kB) Free physical memory: 179MB (183936kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.11.2005 UDF/ISO compilation 6:51:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1836 DVD-Video files reallocation started 6:51:14 PM #2 Phase 114 File dlgbrnst.cpp, Line 1836 DVD-Video files reallocation completed (no file modified) 6:51:14 PM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 6:51:14 PM #4 Phase 111 File dlgbrnst.cpp, Line 1836 DVD-Video files sorted 6:51:14 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 6:51:14 PM #6 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRAM GSA-4120B running 6:51:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 6:51:15 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 6:51:15 PM #9 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-at-once, using DVD media 6:51:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2079456 (462:06.06, 4061MB) 6:51:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 6:51:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD+RW Disc Manufacturer ID: SONY, Media Type ID: S11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 6:51:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: DVD+RW. Medium required by compilation: DVD.) This disc is not empty. (Medium in drive: DVD+RW. Medium required by compilation: DVD.) Accessing disc... (Medium in drive: DVD+RW. Medium required by compilation: DVD.) 6:51:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2079456 (2079456) = #2079456/462:6.6 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2079456 blocks [HL-DT-ST DVDRAM GSA-4120B] 1: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (0) not provided original disc pos #0 + 1 (1) = #1/0:0.1 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [HL-DT-ST DVDRAM GSA-4120B] -------------------------------------------------------------- 6:51:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 3: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4258725888, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 4258725888 4258725888 4258727936, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 2 | 0 | 0x00 | 0x41 0 | 2 | 1 | 0x00 | 0x41 2079456 | 3 | 0 | 0x00 | 0x41 2079456 | 3 | 1 | 0x00 | 0x41 2079457 | lead-out | 1 | 0x00 | 0x41 6:51:19 PM #16 Phase 24 File dlgbrnst.cpp, Line 1836 Caching of files started 6:51:19 PM #17 Text 0 File Burncd.cpp, Line 4177 Cache writing successful. 6:51:19 PM #18 Phase 25 File dlgbrnst.cpp, Line 1836 Caching of files completed 6:51:19 PM #19 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,540 KB/s) 6:51:19 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:51:19 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:51:19 PM #22 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: SONY.... Media type ID: S11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 53 4F 4E 59 00 - 00 00 00 53 31 31 00 39 ...SONY....S11.9 23 00 B4 72 68 02 24 00 - AE 75 58 02 28 00 B2 73 #..rh.$..uX.(..s 62 02 24 04 12 10 E0 10 - F0 00 00 00 00 00 00 00 b.$............. 6:51:19 PM #23 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 13:05,562 (785562ms) -> OK 6:51:19 PM #24 Text 0 File DVDPlusRW.cpp, Line 606 Start write address at LBA 0 DVD high compatibility mode: Yes 7:00:32 PM #25 SCSI -400 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08B00000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0xA0 Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x16 0x40 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x04 0x00 0x16 0x3E 0xC0 0x10 0x09 0x01 0xBB 0x0F 0xA0 0x80 7:00:32 PM #26 CDR -400 File Writer.cpp, Line 304 Unspecified target error 7:00:32 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:00:32 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 7:00:32 PM #29 SCSI -1039 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x16 0x3E 0xC0 0x10 0x35 0x01 0x00 0x0F 0x09 0x01 7:01:23 PM #30 SCSI -1039 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03264984 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x16 0x3E 0xD0 0x10 0x35 0x01 0x00 0x0F 0x09 0x01 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x60 0x05 0x08 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x 7:01:23 PM #31 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 7:01:23 PM #32 SCSI -1039 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032639D8 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x16 0x3E 0xF0 0x10 0x35 0x01 0x00 0x0F 0x09 0x01 7:01:24 PM #33 SCSI -1039 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032639D8 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x16 0x3F 0x10 0x10 0x35 0x01 0x00 0x0F 0x09 0x01 7:01:24 PM #34 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 7:01:24 PM #35 CDR -1039 File WriterStatus.cpp, Line 169 Focus or tracking error 7:01:24 PM #36 TRANSFER -39 File WriterStatus.cpp, Line 169 Could not perform EndSession 7:01:24 PM #37 Phase 38 File dlgbrnst.cpp, Line 1836 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 10:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 27/08/2003 3:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 2, 4, 1, size=89472 bytes, created 6/04/2004 8:39:20 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 4, 1, size=25600 bytes, created 6/04/2004 8:40:10 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 4, 1, size=5504 bytes, created 6/04/2004 8:43:22 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 12:27:50 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi I was getting these same errors.I tried everything from different dvd disks to different speeds,reinstalling windows/nero nothing worked. What ended up fixing the issue was buying a new power supply.Now every dvd I burn works with no errors where as the same dvd disks errored right before I put the new power supply in. So for 40$ you can get a 550 watt power supply and if it doesnt fix it for you atleast you know you have a good power supply for the next year or so (And you probably will spend 40$ on dvds trying to get it burning correctly,atleast this way you get something more then drink coasters)
Thanks for responding, but I don't think the power supply is the problem. If it was, it would affect other processes on my pc, and everything else is running as smooth as can be.
I should add that my DVD has no problem burning videos I download off the Net. Maybe I've run into one of those DVDs that just refuses to be copied. Apparently, this sort of thing does happen from time to time.
