I recently upgraded to Nero you could say from the lame SONIC that came on my computer. It normally takes quite a while to transcode which I am used to not pushin the best notebook on the block Inspirion 2200 with DVD+/-R (Sony q58a) my question is with the .avi file I was trying to copy to DVD transcoded fine and burned until approx 90% I then recieved a log error and saved it I am using quality media and burning at 8x (half speed) Anyone having/had this problem with this particuliar aspect of the new Nero or be able to supply me any extended advice. If so I have the log error saved and would be more than happy to post just need to know which line is my serial so i can edit it out. Thank You For Any Feedback. **From A Newbie In Need Guidance**
Try burning at 4x instead of 8x. Go ahead and post that log. Your serial will begin with 5CXXXXXXX, or 1Cxxxxxxx, or 2Axxxxxxxxxx..... Something along those lines. It is near the top of the log file.
You havent said which version of Nero you are using, so heres where you can find the log files Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt
First off thank you for such quick response and JXP2307 the 4x I am planning on trying next , but before I dedicate any more time to it I wanted to see if there were any obvious errors in my log which here it is and thank you for all your help! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <SONY DVD+-RW DW-Q58A> Version: UDS1 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Hitachi HTS541040G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+-RW DW-Q58A atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === SONY DVD+-RW DW-Q58A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte BUFE : 0 Physical memory : 247MB (253308kB) Free physical memory: 59MB (60848kB) Memory in use : 75 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.3.2006 NeroAPI 2:33:55 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:33:56 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 38912KB of Memory 2:33:56 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:33:56 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD+-RW DW-Q58A running 2:33:56 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:33:56 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:33:56 AM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 2:33:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1905663 (423:28.63, 3721MB) 2:33:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 2:33:57 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: SONY DVD+-RW DW-Q58A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 2:33:57 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:33:57 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1905664 (1905664) = #1905664/423:28.64 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1905664 blocks [D: SONY DVD+-RW DW-Q58A] -------------------------------------------------------------- 2:33:57 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD+-RW DW-Q58A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3902799872, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1905664 | lead-out | 1 | 0x41 | 0x00 2:33:57 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:33:57 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:33:57 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 2:33:57 AM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 2:33:57 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 2:33:57 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 2:33:58 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:33:58 AM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 2:33:58 AM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 2:33:58 AM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:34:49 AM #24 Text 0 File Cdrdrv.cpp, Line 1211 02:34:49.171 - D: SONY DVD+-RW DW-Q58A : Queue again later 2:41:07 AM #25 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 2:41:07 AM #26 Text 0 File Reader.cpp, Line 367 Exception value: -1 2:41:13 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:41:13 AM #28 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 749631 2:41:35 AM #29 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 2:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
