Nero 8 DVD burning issues please help!

I would really appreciate some help.

I am running XP on a Dell Dimension 9150. I moved away from Roxio Sonic that came with this Dell and recently bought Nero 8 Ultra but have been having problems burning DVDs. This problem includes both copying DVDs and burning files to DVD. The hardware check says the recording drive is working. I have uninstalled all Roxio components (I think). I have reinstalled Nero 8 three times with no improvement. I am using TDK DVDs but had similar problems using Verbatim.

What happens when I burn is that the burn process starts, stays at 1% and then stops. The report below is a typical log report that I am getting. Note that the Nero log does not list a Wnaspidll file even though there is one in the Windows System directory as well as in Nero directory. The problem burning is the same whether or not I delete that file in the Windows System directory.

Again, your help is appreciated.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
(Nero Express)
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CdRom0
HL-DT-ST DVD+-RW GWA4164B E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1451MB (1485904kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.2.2008
ISO compilation
8:11:03 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:11:03 PM #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:11:03 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

8:11:03 PM #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

8:11:04 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 1673519 (371:53.44, 3268MB)

8:11:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

8:11:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD+-RW GWA4164B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

8:11:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:11:04 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1673520 (1673520) = #1673520/371:53.45
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1673520 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------

8:11:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: HL-DT-ST DVD+-RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3427368960, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1673520 | 0 | 0x00
1673520 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:11:12 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

8:11:12 PM #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

8:11:12 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

8:11:12 PM #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

8:11:12 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

8:11:12 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

8:11:12 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:11:12 PM #18 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

8:11:12 PM #19 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

8:11:12 PM #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: ? mm, Maximum Rate: ? Mbps (D h)
Number of Layers: 2, Track Path: Parallel Track Path (PTP), Layer Type: ?
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 7D h (LBN: FFFD007D h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 7.0 12.3 -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 71 - C6 00 00 21 F7 00 00 00 .`...0@q...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 06 FA 00 ................
58 00 58 0C 54 00 DD 1E - 0F DF 00 00 00 00 00 00 X.X.T...........

8:11:12 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

8:13:43 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x0a450040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

8:13:43 PM #23 CDR -1135 File Writer.cpp, Line 312
Write error
E: HL-DT-ST DVD+-RW GWA4164B

8:13:43 PM #24 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was -1 (FFFFFFFFh)

8:13:43 PM #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)

8:13:43 PM #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:13:50 PM #27 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

8:13:50 PM #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Disc Manufacturer: CMC MA - G. AM3

doesnt like the disc me thinks...

 

OK...I moved to Sony DVDs and it was a bit better but still failed. The burning process took over an hour, got stuck at 100% but did not finalize. I used Nero Express and the quick copy function (direct from disc to disc).

Can the problem be that I still have elements from Roxio (actually one of the reasons I moved away from Roxio Sonic was that I was starting to have burning issues with it too)? I uninstalled Sonic and used the Roxio zapper (although it seems that zapper is only intended for early versions of Roxio CD copying software).

Also I still see that the log states that "WinAspi: - ". Can this be the issue? I did check and this file is in the Nero program files but does not show up in the log report. I have reinstalled Nero 8 Ultra 3 times.

Need help before I loose my mind! The latest log is below.

Thanks.


Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
(Nero Express)
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CdRom0
HL-DT-ST DVD+-RW GWA4164B E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1193MB (1222108kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.2.2008
DVD-Copy on the fly
7:01:33 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:01:33 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:01:47 PM #3 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

7:01:47 PM #4 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1766176 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

7:01:47 PM #5 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 1766176 = 1766176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

7:01:47 PM #6 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

7:01:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 1766175 (392:29.00, 3449MB)

7:01:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

7:01:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD+-RW GWA4164B, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

7:01:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:01:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1766176 (1766176) = #1766176/392:29.1
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1766176 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------

7:01:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: HL-DT-ST DVD+-RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3617128448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1766176 | 1766176 | 0x00
1766176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

7:01:48 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

7:01:48 PM #14 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-No, small files-No (<64KB)

7:01:48 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22,160 KB/s)

7:01:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:01:48 PM #17 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

7:01:48 PM #18 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

7:01:48 PM #19 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04bc1080: Len x648

7:01:48 PM #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:01:48 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

7:19:16 PM #22 SPTI -1114 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 E6 E0 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x0a528e80: Len x10000

7:19:16 PM #23 TRANSFER -25 File Reader.cpp, Line 270
Error reading data

7:19:16 PM #24 SPTI -1114 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 47 40 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29
Buffer x0a538ec0: Len x10000
0x00 00 01 BA 44 04 DE A1 1D 03 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 01 FF C1 EA A5 D0 D2 9A A7 5C
0x74 93 64 51 F9 88 51 C7 B4 15 C6 0B B2 65 CA 78

7:19:16 PM #25 CDR -1114 File Writer.cpp, Line 312
Reset occurred
E: HL-DT-ST DVD+-RW GWA4164B

7:19:16 PM #26 Text 0 File Reader.cpp, Line 273
Exception value: -1114

7:19:16 PM #27 CDCOPY -12 File DVDReader.cpp, Line 148
Unrecoverable read error at
LBA 59104

8:15:48 PM #28 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was 18239 (473Fh)

8:15:48 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

8:15:49 PM #30 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22,160 KB/s)

8:15:49 PM #31 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:15:49 PM #32 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:15:49 PM #33 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

8:15:49 PM #34 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:15:50 PM #35 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

8:15:50 PM #36 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Slow your burn to 4X

 

slow down your burning speed to 8x

 

Thanks...OK I just tried that but...at 4x (see below) I did not even get to 1%.

See my previous post for my comments about problems.

Help..I am definitely loosing my mind...bought new sofware, new discs, reinstalled Nero multiple times, tried different speeds....


Here is the latest log.


Thanks for any help...


Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
(Nero Express)
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CdRom0
HL-DT-ST DVD+-RW GWA4164B E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1277MB (1307864kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.2.2008
DVD-Copy on the fly
9:32:21 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:32:21 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:32:22 PM #3 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

9:32:22 PM #4 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1766176 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

9:32:22 PM #5 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 1766176 = 1766176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

9:32:22 PM #6 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

9:32:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 1766175 (392:29.00, 3449MB)

9:32:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

9:32:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD+-RW GWA4164B, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

9:32:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:32:22 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1766176 (1766176) = #1766176/392:29.1
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1766176 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------

9:32:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: HL-DT-ST DVD+-RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3617128448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1766176 | 1766176 | 0x00
1766176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

9:32:32 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

9:32:32 PM #14 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-No, small files-No (<64KB)

9:32:32 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

9:32:32 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:32:32 PM #17 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

9:32:32 PM #18 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

9:32:32 PM #19 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:32:32 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

9:33:58 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x07d90040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

9:33:58 PM #22 CDR -1135 File Writer.cpp, Line 312
Write error
E: HL-DT-ST DVD+-RW GWA4164B

9:33:58 PM #23 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was -1 (FFFFFFFFh)

9:33:58 PM #24 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)

9:33:58 PM #25 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:33:58 PM #26 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:33:58 PM #27 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

9:33:58 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:34:04 PM #29 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

9:34:04 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

This is not recommended, turn this feature OFF

 

To turn that off, would I remove the checkmark in the "quick copy" box in options? I can't find a function called copy on the fly even though I do see it in the log report.

 

That's what I would do or look for Burn at Once

 

install this and run it and test loaded!

http://www.cdr-zone.com/software/aspi_layers/adaptec_aspi_layer.html

 

Rotary:

I ran the aspi_you file and it looks like it sensed the hard drive and 2 disc drives; the screen results flash only for 1/2 second so it's hard to tell but I don't think I saw any error reports.

Gwen / and anybody else who can help:

As you suggested, I tried running the copy to DVD by first burning the image to the hard drive rather than on the fly. The burning of a temporary image to my hard drive seemed to work fine, but then the program did not sense that I had put a blank DVD in the E drive where my burner is. Even though there was a blank disc there already, the drice opened and asked for a disc. I tried putting several new discs into drive E but it still said the the drive is empty even though I waited several minutes. Then I cancelled that action as it was going nowhere. Note that the program was sensing blank discs previously when I was using the direct disc to disc copy function. Here is the latest log.

Thanks again.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
(Nero Express)
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CdRom0
HL-DT-ST DVD+-RW GWA4164B E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1390MB (1424220kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.2.2008
===== Disc-Copy over image - 1st step : Copy to image ...

12:29:37 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:29:58 AM #2 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Access is denied.


12:29:58 AM #3 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:29:59 AM #4 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:29:59 AM #5 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1766176 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

12:29:59 AM #6 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 1766176 = 1766176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

12:29:59 AM #7 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

12:29:59 AM #8 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1766175 (392:29.00, 3449MB)

12:29:59 AM #9 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12:29:59 AM #10 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:29:59 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1766176 (1766176) = #1766176/392:29.1
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1766176 blocks [Image Recorder]
--------------------------------------------------------------

12:29:59 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3617128448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1766176 | 1766176 | 0x00
1766176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:29:59 AM #13 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-No, small files-No (<64KB)

12:29:59 AM #14 Phase 120 File dlgbrnst.cpp, Line 1762
Creating the image for burning

12:29:59 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:29:59 AM #16 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400

12:37:42 AM #17 Text 0 File WriterStatus.cpp, Line 113
<Image Recorder> start writing Lead-Out at LBA 1766176 (1AF320h), length 0 blocks

12:37:42 AM #18 Phase 121 File dlgbrnst.cpp, Line 1762
Creating Image completed successfully

12:37:44 AM #19 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:37:47 AM #20 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:37:47 AM #21 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed



===== Disc-Copy over image - 2nd step : Burn the image ...

12:37:47 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:37:48 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3617128448
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\George\My Documents\TempImage.nrg>

12:37:48 AM #3 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

12:41:58 AM #4 Phase 40 File dlgbrnst.cpp, Line 1762
Aborted by user

12:41:58 AM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12:41:58 AM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD+-RW GWA4164B
Medium not present

12:41:58 AM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)

12:41:58 AM #8 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

DMA needs to be on, heres a guide to turn back on

http://forums.afterdawn.com/thread_view.cfm/260038

 

to check aspi layer, mine is located here = C:\adaptec\aspi\aspichk.exe <-- use this tool, aspichk.exe to check loaded...

is this the size of your image or dvdR DL ?

Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1766175 (392:29.00, 3449MB)

 

Gwen:

I will work on turning the DMA back on and will post results in a day. Thanks. The DMA was previously on but I guess the ongoing errors turned them off as I read that that can happen in XP.

Rotary:

I am not using DL discs just regular ones. The source disc for the burn contains about 3500 megs. I did not measure the size of the image. I assume it was temporary and got erased when the burn was halted. I'll keep an eye on that next test.

I used that aspichk.exe file you mentioned and it indicated that the Aspi files that they list are not installed. I know the Ahead ASPI files are there in in the Nero and Windows system folders though. The aspichk.exe indicated that there is an error and ASPI is not properly installed - but that statement is in very faint letters at the bottom of the report table - I assume that statement is valid. I have reinstalled Nero 3 times. Does that Adaptec analysis only apply to the relevant ASPI files or configuration for Roxio or is valid also for Nero? I plan to turn DMA back on as Gwen suggested but I see your point in that it is strange that my logs report nothing under the ASPI section. What should I do next?

 

aspi layer is for your drives/pc not totally for software, but the software use the drives, so needed by both really...

use C:\adaptec\aspi\aspiinst.exe to install

 

Hi:

I am still having problems. I followed all previous advise from G and R as follows:

1) DMA is now turned back on.
2) Intalled ASPI layer and now ASPI is properly installed according to aspichk. (however latest log still reads as "ASPI - ") I have highlighted that in red.

Additionally, I did the following:
1) uninstalled and reinstalled the burner though device manager
2) Successfully burned a CD (not a DVD) using Windows Media Player with no problem to double check whether the burner actally works in practice;
3) Reintalled Nero 8 Ultra; note that I have not been installed all components (i.e. these are not installed: Mobile, Home, InCD, Scout, ShowTime; Rescue Disc) but I assume that is not causing the problem.
4) Note that when I open the Nero Burning ROM function, that an error appears and says that I should reinstall Nero. That appeared before and after I reinstalled Nero.

The image to disc are created with no problem or things are OK when I start to burn a data DVD - the problems starts when the burning is supposed to start. The burner drive is blinking trying to sense the disc but the burning hangs at 1% and never really gets started and then the error report kicks in. It seems like the burning process never gets started - i.e. disc is not being sences even though I have tried different brands including SONY.

Here is the latest log. Again I appreciate your help.


Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
(Nero Express)
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 3 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CdRom0
HL-DT-ST DVD+-RW GWA4164B E: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1408MB (1441968kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.3.2008
ISO compilation
12:35:54 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:35:55 PM #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:35:55 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

12:35:55 PM #4 Text 0 File Burncd.cpp, Line 3520
Turn on Disc-At-Once, using DVD media

12:38:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297903 (510:38.53, 4488MB)
Last address to be written: 1654591 (367:41.16, 3231MB)

12:38:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12:38:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD+-RW GWA4164B, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

12:38:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)

12:38:36 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1654592 (1654592) = #1654592/367:41.17
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1654592 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------

12:38:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: HL-DT-ST DVD+-RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3388604416, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1654592 | 0 | 0x00
1654592 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:38:45 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:38:45 PM #12 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12:38:45 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

12:38:45 PM #14 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

12:38:45 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

12:38:45 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

12:38:45 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:38:45 PM #18 Text 0 File DVDR.cpp, Line 3227
Recording mode: Sequential Recording Mode

12:38:45 PM #19 Text 0 File DVDR.cpp, Line 3383
Start write address at LBA 0
DVD high compatibility mode: Yes

12:38:45 PM #20 Text 0 File Cdrdrv.cpp, Line 9918
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:38:45 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

12:41:06 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x0ac50040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:41:06 PM #23 CDR -1135 File Writer.cpp, Line 312
Write error
E: HL-DT-ST DVD+-RW GWA4164B

12:41:06 PM #24 Text 0 File DVDR.cpp, Line 3785
EndDAO: Last written address was -1 (FFFFFFFFh)

12:41:07 PM #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)

12:41:07 PM #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:41:13 PM #27 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

12:41:13 PM #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

ok

uninstall nero v8 AND all its componants via control panel add/remove

then use nero v8 clean tool to make sure all is gone by by...

http://www.nero.com/enu/support-nero8-tools-utilities.html

-------------

did we get you to check your firmware is upto date for the drive?

 

The computer is 2 years old. I may have checked for driver updates but I'm not sure. Is that what you mean by firmware? How do I do that?

Also, I'll try uninstalling like I did before through control panel add/revove and then using the removal tool as you suggested.

thanks.

 

HI:

So I uninstalled Nero * and used the cleaning tool and then reinstalled. The same problem happened. The image was burned to the hard drive, then a dialogue box says "waiting for disc" and "please insert an empty disc to write to" even though there is a empty disc in the burner. I removed it several times, put it back in, the dive blinks and then stop blinking but the dialogue box does not close. Seems that program is not sensing that the disc is there and to start burning.

- Bossman82

 

OK. So I am still trying to resolve the problems with Nero. So I tried burning MP3 to a CD. Worked perfectly through Windows Media Player. Using same type of disc and files, it failed through Nero. However, it looks like it started to burn and got about 84% done as compared to not even getting started using a DVD (see previous posts).

Here is the log from the failed CD burn attempt. Why would things work OK through Windows media Player but not Nero? Looks like the burner drive works.

Haven't heard back about how to check if my firmware for the burner is up to date. Again, it's only a two year old machine.

Oh by the way, when I turned the DMA divers back on, I noticed that I only have a primary IDE channel (no secondary channel). I read that with some newer machines that is normal. With that primary channel there does appear to be two devices - both using DMA. I assume that's OK.

Should I give up on Nero? I don't see why there are so many problems with basic burning using such recent software on a relatively new machine that I have kept up-to-date.

Again, direction is appreciated.



Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0

Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 1 - 8.0.3.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FDS1 - HA 1 TA 0 - 8.0.3.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 7L250S0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1615 D: CdRom0
HL-DT-ST DVD+-RW GWA4164B E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1362MB (1395076kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.3.2008
CD-ROM (ISO)
1:48:22 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

1:48:22 PM #2 Text 0 File Isodoc.cpp, Line 6668
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

1:48:22 PM #3 Text 0 File Burncd.cpp, Line 3202
HL-DT-ST DVD+-RW GWA4164B
Buffer underrun protection activated

1:48:22 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3345
First writeable address = 0 (0x00000000)

1:48:22 PM #5 Text 0 File Burncd.cpp, Line 3520
Turn on Track-At-Once, using CD-R/RW media

1:48:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359846 ( 79:59.71)
Last address to be written: 354847 ( 78:53.22)

1:48:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

1:48:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD+-RW GWA4164B;
CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

1:48:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:48:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 795
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 354848 (354848) = #354848/78:51.23
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 354846 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------

1:48:22 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 997
Prepare [E: HL-DT-ST DVD+-RW GWA4164B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 727035904, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 354848 | 0 | 0x00
354848 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

1:48:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1068
Removed 2 run-out blocks from end of track 1. Length: 354848 -> 354846.

1:48:35 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

1:48:35 PM #14 Text 0 File Burncd.cpp, Line 4306
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

1:48:35 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

1:48:35 PM #16 Text 0 File Burncd.cpp, Line 4425
Cache writing successful.

1:48:35 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

1:48:35 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 48x (7,200 KB/s)

1:48:35 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2723
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:48:35 PM #20 Text 0 File MMC.cpp, Line 22418
Set BUFE: Buffer underrun protection -> ON

1:48:35 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

1:52:10 PM #22 SPTI -1119 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 04 59 E0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x0d7f3700: Len x10000
0xC3 6D 93 57 62 BC 8F CD 32 B3 C0 D1 A3 B5 4F 37
0x78 D4 AA 38 C1 20 16 D1 12 5B B0 1A C5 CD CF E5
0xC6 7C 7E DA D3 FF 3C 6B C2 C7 46 35 F6 E9 FF FF

1:52:10 PM #23 CDR -1119 File Writer.cpp, Line 312
Track following error
E: HL-DT-ST DVD+-RW GWA4164B

1:52:10 PM #24 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
E: HL-DT-ST DVD+-RW GWA4164B

1:52:10 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack

1:52:10 PM #26 Text 0 File MMC.cpp, Line 17180
<HL-DT-STDVD+-RW GWA4164B> start Close Session

1:52:46 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 48x (7,200 KB/s)

1:52:46 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

1:52:52 PM #29 Text 0 File Cdrdrv.cpp, Line 11159
DriveLocker: UnLockVolume completed

1:52:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)