Hi there, I am having a lot of problems burning DVD's with Nero. It used to work absolutely fine but now i seem to be getting "could not perform end of disc at once" and "writing short lead out" errors. I have read the forums and enabled my DMA by uninstalling and re-installing my secondary channel but still no sucess. Would really appreciate some advice. Here is my log ... Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 01/02/2001 15:10:18 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero Version: 6.6.0.8 Recorder: Version: P3.0 - HA 1 TA 1 - 6.6.0.8 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: < JLMS DVD-ROM LTD-166S>Version: DS08 - HA 1 TA 0 - 6.6.0.8 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SV1204H atapi Port 0 ID 0 DMA: On CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On CdRomPeripheral : PHILIPS DVDR1640P atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === JLMS DVD-ROM LTD-166S D: CDRom0 PHILIPS DVDR1640P E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 153MB (157680kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.2.2006 ISO compilation 10:17:00 #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:17:00 #2 Text 0 File Reader.cpp, Line 127 Reader running 10:17:00 #3 Text 0 File Writer.cpp, Line 122 Writer PHILIPS DVDR1640P running 10:17:00 #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 10:17:00 #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 10:17:00 #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2264655 (503:15.30, 4423MB) 10:17:00 #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 10:17:00 #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: PHILIPS DVDR1640P, Media type: DVD+RW 10:17:00 #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:17:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2264656 (2264656) = #2264656/503:15.31 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264656 blocks [PHILIPS DVDR1640P] -------------------------------------------------------------- 10:17:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [PHILIPS DVDR1640P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4638015488, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2264656 | lead-out | 1 | 0x41 | 0x00 10:17:01 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:17:01 #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 10:17:01 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:17:01 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:17:01 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:17:01 #17 SCSI -1066 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037E5200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 10:17:01 #18 Phase 98 File dlgbrnst.cpp, Line 1832 Start formatting disc before burning 10:17:24 #19 Phase 100 File dlgbrnst.cpp, Line 1832 Formatting disc was successful 10:17:24 #20 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 10:17:43 #21 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03E70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x45 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 10:17:43 #22 CDR -1135 File Writer.cpp, Line 311 Write error 10:17:43 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:17:44 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:17:44 #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 01/02/2001 15:10:12 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Newer firmware for your burner is here http://www.p4c.philips.com/files/d/dvdr1640k_00/dvdr1640k_00_fus_eng.zip You may need to update nero as well.
here is a link for Nero update: ftp://ftp.us2.nero.com/Nero-6.6.0.18_no_yt.exe You are also burning a little too colose to the edge of the disc.
Hi there, Thanks for your replies. I have updated the firmware for my burner and updated Nero but now i am having a different problem. My burner doesn't seem to recognise blank discs I am putting in. As i go to burn on Nero it just keeps throwing the disc out saying it needs a blank disc even though i know the disc i am putting in is blank. Since i have updated the firmware do i need to configure it to read blank discs? Cheers for your help.
BTW - had this problem with not reading blank discs with Nero 7 that Whompus recommended and with the update for 6.6.0.8 which cyprusrom recommended. Also - cyprusrom - by buring too close to the disc i aussume you mean burning too much data onto the disc. Is there a recommended amount of data to burn on a 4.7 dvd?
Thanks, i've installed In CD - i'm now using the Nero 7.0.5.4 demo - but Nero still doesn't seem able to read my blank DVD's - neither DVD-R or DVD-RW - just keeping opening my drive and chucking the disc out at me - saying waiting for disc and please insert the disc to be written too. Any other advice? Cheers in advance.
Is the problem only when you use Nero? Do you have the same problem when you try to burn with, for example , DVD Decrypter? And, DO NOT INSTALL INCD!! That gives nero burning problems. If you want to use Nero 7,you should use version 7.0.14b, as the latest one, 7.0.5.4 has bugs, does not work properly. ftp://ftp3.usw.nero.com/software/nero7/Nero-7.0.1.4b_eng_no_yt.exe When you updated the firmware, did you get a succesful update message?
I am also having the same problem as Zwaigo, but with Nero 6 Ulta I also de-install and re-install downloaded the recent updates. I am getting an error- burning failed, it's just not writing Movie files to my blank dvds (DVD-R). Please Help me!!
check to see if you have to use dvd+R and check your burner settings by going to my computer right click on your burner and click properties then look at your settings check nero for the proper settings region ect... find the manuel for your burner and check yhat too but first try dvd+R. get back to me.
hi patsfan, my burner is definately DVD-RW i've burnt loads of DVD's that are DVDR- before. everything was working fine then it just stopped burning. since then i have updated my fireware, updated nero and it just seems i am having more and more problems. now nero doesn't seem to recognise blank dvd's anymore (see previous post). i've changed nero from 7.0.5.4 to 7.0.1.4 as someone suggested and now nero doesn't even seem to recognise my drive! it is now just saying sorry this nero version supports recorders only. it's becoming extremely frustrating - any advice greatly appreciated.
if you are having that many problems with nero 7 go to the nero site and try using version 6 if that works i will send you a copy of nero 6 thats what i use and i have no problems if you want to spend a little money like $79.00 you have to get roxio easy creator 8 it is the best program for everything. but if you only want to copy dvd's get dvd x-copy platnium at 321 studios.com i bought it for $29.00 get back to me.
