Having problems / errors burning both movies and ps2 games with Nero. It can be either an error at the beginning of the burn, in the middle or a "can't perform end of disk error" Sometimes I'll switch and try with Alcohol 120 and it will work or I end up with a 2nd coaster. A while later I'll get frustrated, try again with Nero and it works. I'm at a loss here as to why it's not working. Averaging about 50% success and getting alot of nice looking coasters! Below is my latest log. Any help at all would be greatly appreciated. Thanks!! Windows XP 5.1 IA32 WinAspi: ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A304 - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : Image Simulation 1.0g PrecSim Port 0 ID 0 DMA: Off DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 2 ID 0 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 2 ID 1 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8162B D: CDRom0 HL-DT-ST DVDRAM GSA-4040B E: CDRom1 Image Simulation F: CDRom2 SCSIVAX DVD/CD-ROM G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 231MB (236684kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.2.2006 Burn DVD Image 3:31:51 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 3:31:51 PM #2 Text 0 File Reader.cpp, Line 124 Reader running 3:31:51 PM #3 Text 0 File Writer.cpp, Line 113 Writer E: HL-DT-ST DVDRAM GSA-4040B running 3:31:51 PM #4 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 3:31:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 930341 (206:44.41, 1817MB) 3:31:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 3:31:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 3:31:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:31:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 930342 (930342) = #930342/206:44.42 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 930342 blocks [E: HL-DT-ST DVDRAM GSA-4040B] -------------------------------------------------------------- 3:31:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1905340416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 930342 | lead-out | 1 | 0x41 | 0x00 3:31:52 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:31:52 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 3:31:52 PM #13 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 3:31:52 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 3:31:52 PM #15 Phase 28 File dlgbrnst.cpp, Line 1725 Speed measurement started 3:31:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:32:37 PM #17 Text 0 File WriterStatus.cpp, Line 116 <E: HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 930342 (E3226h), length 0 blocks 3:32:37 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:32:37 PM #19 Phase 29 File dlgbrnst.cpp, Line 1674 Speed measurement completed: 31.3x (43,270 KB/s) 3:32:37 PM #20 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 2x (2,770 KB/s) 3:32:37 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:32:37 PM #22 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode for Multisession 3:32:37 PM #23 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 3:32:37 PM #24 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 3:32:37 PM #25 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:44:12 PM #26 Text 0 File WriterStatus.cpp, Line 116 <E: HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 930342 (E3226h), length 0 blocks 3:44:13 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:44:13 PM #28 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 930335 3:44:14 PM #29 CDR -1 File ThreadedTransferInterface.cpp, Line 1937 Unspecified Recorder Error E: HL-DT-ST DVDRAM GSA-4040B 3:44:14 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937 Could not perform end of Disc-at-once 3:44:14 PM #31 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was -1 3:44:15 PM #32 CDR -201 File WriterStatus.cpp, Line 167 Invalid write state E: HL-DT-ST DVDRAM GSA-4040B 3:44:15 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 3:44:15 PM #34 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2005 12:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi ßud, You're a little behind on the version of nero you're using. Write down that serial# for nero and uninstall version 7.0.1.2 using the nero cleantool found here: http://ww2.nero.com/nero7/enu/General_CleanTool.html After install version 7.0.1.4b, its stable and works quite well, you can download it here: http://httpdl6.us.nero.com/software/nero7/Nero-7.0.1.4b_eng_no_yt.exe ********************************************************************* Your burner's firmware is upto date @ version A304, so no problem there. ********************************************************************* Here: CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 2 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off These two devices are most likely set to operate at the slower PIO mode which can potentially cause a problem, so turn on DMA for these two, here's a guide if needed: http://www.onthegosoft.com/dma_setting_nt.htm ********************************************************************* Here: Last possible write address on media: 2298495 (510:46.45, 4489MB) Have shrink or nero recode produce smaller files sizes to keep from burning too close to the disks outer edge. In shrink goto: edit-->preferences, in the preferences tab choose custom from the dropdown menu and enter a value of 4300. ********************************************************************* Here: Burn process failed at 2x (2,770 KB/s) Your burning a little too slow (not always a good thing with some burners), try bumping it up to 4X (the sweet spot). ********************************************************************* I also see possible indications that the burner may not be recognizing the brand of media you're using, so it's applying a generic write strategy, which could be why you're averaging about 50% success rate. You should try another brand, I recommend you take a look at the burners manufacturer's web site and see if they provide a list of recommended media for the burner. You could also try using brands like Sony(DVD+Rs), verbatim (16x DVD-Rs), or toyo yuden disks and see if you get a better success rate.
Thanks so much Will give these all a try when I get home this aft and report back. One question: "Here: Last possible write address on media: 2298495 (510:46.45, 4489MB) Have shrink or nero recode produce smaller files sizes to keep from burning too close to the disks outer edge. In shrink goto: edit-->preferences, in the preferences tab choose custom from the dropdown menu and enter a value of 4300." Alot of my movies I'll create using Nero Vision. I'm assuming I can reduce the size of them in there? Also, what if it's a ps2 game? Can the size of that be adjusted? Thanks for all your help!
You'll need to use nero recode 2 to change the target size of the output file for the movie backups to 4300, not sure about a ps2 game (haven't done this yet). You can get a guide on recode 2 here: http://ww2.nero.com/nero7/enu/User_Guide_Recode_2.html
Finally had a chance to give this a try. Just had to come back and say thanks!!! Around 95% success rate now Thanks so much for your help!
I too am getting a nero burning error here is my log, don't know if anyone can help: therules Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 09:24:34 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <_NEC DVD+RW ND-2100AD> Version: 1.26 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD+RW ND-2100AD>Version: 1.26 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3200822A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 3 ID 0 DMA: On CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD+RW ND-2100AD E: CDRom0 SAMSUNG DVD-ROM SD-616E F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047852kB) Free physical memory: 181MB (186320kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.3.2006 Burn DVD Image 18:22:18 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 18:22:18 #2 Text 0 File Reader.cpp, Line 124 Reader running 18:22:18 #3 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD+RW ND-2100AD running 18:22:18 #4 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 18:22:18 #5 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286017 (508:00.17, 4464MB) 18:22:18 #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 18:22:18 #7 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R 18:22:18 #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:22:18 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2286018 (2286018) = #2286018/508:0.18 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286018 blocks [_NEC DVD+RW ND-2100AD] -------------------------------------------------------------- 18:22:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681764864, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286018 | lead-out | 1 | 0x41 | 0x00 18:22:18 #11 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 18:22:18 #12 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 18:22:18 #13 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 18:22:18 #14 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 18:22:18 #15 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 18:22:18 #16 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 8x (11,080 KB/s) 18:22:18 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:22:18 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 289 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x07870600: Len x804 18:22:19 #19 Text 0 File DVDR.cpp, Line 6328 Drive: _NEC DVD+RW ND-2100AD Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 18:22:19 #20 CDR -1207 File DVDR.cpp, Line 5463 Book Type automatically set to: DVD-ROM 18:22:19 #21 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 18:22:38 #22 SPTI -1106 File SCSIPassThrough.cpp, Line 289 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x071c0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18:22:38 #23 CDR -1106 File Writer.cpp, Line 311 Power calibration error E: _NEC DVD+RW ND-2100AD 18:22:38 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18:22:38 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 18:22:38 #26 Phase 127 File dlgbrnst.cpp, Line 1685 Generating DVD high compatibility borders 18:22:38 #27 Phase 129 File dlgbrnst.cpp, Line 1685 Generating DVD borders completed successfully 18:22:39 #28 Text 0 File DVDR.cpp, Line 6328 Drive: _NEC DVD+RW ND-2100AD Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 18:22:39 #29 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 09:24:34 File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 20/01/2006 23:46:33 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
PESmaster There seem to be certain sections of your log that are missing, can you post the whole thing if possible? Try these suggestions first: here: [bold]Nero Version: 6.6.1.4 [/bold] This version of nero is a bit buggy and will not work with DVD shrink's autoburn with nero option/feature. If burning manually then you could stick with this version, if you at some point want to use shrink to autoburn with nero, then use version 6.6.0.18. You can uninstall nero6 version 6.6.1.4 using the nero general cleantool found here; http://ww2.nero.com/nero6/enu/General_CleanTool.html You can then install version 6.6.0.18 packages 1 and 2 found here; Package 1 http://httpdl1.usw.nero.com/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/NVE-3.1.0.21_no_yt.exe Re-enter the serial# and you're good to go. here: [bold]Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286017 (508:00.17, 4464MB)[/bold] Have shrink or nero recode produce smaller files sizes to keep from burning too close to the disks outer edge. In shrink goto: edit-->preferences, in the preferences tab choose custom from the dropdown menu and enter a value of 4300. here: [bold]Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x071c0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00[/bold] Your drive is unhappy with your choice of media, try another brand, I always recommend what I've tried and has worked well for me, try Verbatims DVD-Rs or Sony DVD+R disks (make sure the Sony's are made in japan). here: [bold]Burn process failed at 8x (11,080 KB/s)[/bold] Try slowing it down to 4X
Thanks very much. I thought i'd posted everything from the log, i've checked and it is the same as the one i saved from nero. The only thing i took out was the serial number.Your help is appreciated though, thanks! P.S i am using sony dvd+r 8x but i can't seem to find if they are from japan!
Look for made in......on the package the disks are in. Make all the changes and see how it goes, try it with those sony disks.
Hey could someone help me too? I have been having errors too.. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 (Nero Express) Recorder: <MATSHITA DVD-RAM UJ-831S>Version: 1.90 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.2.3.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6025GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-RAM UJ-831S atapi Port 1 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === MATSHITA DVD-RAM UJ-831S D: CDRom0 AXV CD/DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1006MB (1030576kB) Free physical memory: 551MB (565096kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.8.2006 CD-ROM (ISO) 2:44:29 PM #1 Text 0 File Isodoc.cpp, Line 6427 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:44:29 PM #2 Text 0 File Burncd.cpp, Line 3086 MATSHITA DVD-RAM UJ-831S Buffer underrun protection activated 2:44:29 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 2:44:29 PM #4 Text 0 File Reader.cpp, Line 124 Reader running 2:44:29 PM #5 Text 0 File Writer.cpp, Line 113 Writer D: MATSHITA DVD-RAM UJ-831S running 2:44:29 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:44:29 PM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Track-At-Once, using CD-R/RW media 2:44:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 76431 ( 17:01.06) 2:44:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 2:44:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: MATSHITA DVD-RAM UJ-831S 2:44:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 2:44:53 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 76432 (76432) = #76432/16:59.7 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 76430 blocks [D: MATSHITA DVD-RAM UJ-831S] -------------------------------------------------------------- 2:44:53 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: MATSHITA DVD-RAM UJ-831S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 156839936, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 76432 | lead-out | 1 | 0x41 | 0x00 2:44:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127 Removed 2 run-out blocks from end of track 1. Length: 76432 -> 76430. 2:44:53 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:44:53 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:44:53 PM #17 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 2:44:54 PM #18 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 2:44:54 PM #19 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 2:44:54 PM #20 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 24x (3,600 KB/s) 2:44:54 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:44:54 PM #22 Text 0 File MMC.cpp, Line 22035 Set BUFE: Buffer underrun protection -> ON 2:45:36 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 42 40 00 00 20 00 00 00 Sense Area: 0xF1 00 03 00 00 3F DE 0A 00 2B 00 00 0C Buffer x066a0000: Len x10000 0x0A 88 76 AB 11 9D A4 94 67 C9 53 92 33 F5 20 7E 0xB4 F2 AE A4 AB 2A BE 57 82 14 AF 3D 41 F7 1D 0F 0xE1 5D 14 EA 5D DA 5D 48 76 E6 BC 75 D3 4F 21 DF 2:45:36 PM #24 CDR -1135 File Writer.cpp, Line 302 Write error D: MATSHITA DVD-RAM UJ-831S 2:45:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:45:36 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:45:36 PM #27 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state D: MATSHITA DVD-RAM UJ-831S 2:45:36 PM #28 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 2:45:36 PM #29 Text 0 File MMC.cpp, Line 16846 <MATSHITADVD-RAM UJ-831S > start Close Session 2:46:09 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 24x (3,600 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 1:16:24 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/17/2006 12:23:54 AM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 11:00:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any kind of help would be really appreciated. Thanks!
