here is the log. any help? 1a2001000003218806599620 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 6:03:20 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero Version: 6.6.0.8 (Nero Express) Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU53 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CDRW/DVD TSL462C>Version: DE01 - HA 0 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : Hitachi HTS541060G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CDRW/DVD TSL462C atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CDRW/DVD TSL462 E: CDRom0 TOSHIBA CD/DVDW SD-R5372 K: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1271MB (1301884kB) Free physical memory: 666MB (682568kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.3.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 5:19:45 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 5:19:45 PM #2 Phase 48 File dlgbrnst.cpp, Line 1832 Analyzing disc 5:19:45 PM #3 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 5:19:45 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1907 The CD is copyrighted 5:19:46 PM #5 Text 0 File CDCopy.cpp, Line 2123 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 253956 253955 ( 56:28.05) 5:19:46 PM #6 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 253956 = 253956, data (TRM_DATA_MODE1, block size 2048) 5:19:47 PM #7 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using CD-R/RW media 5:19:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 445499 ( 99:01.74) Last address to be written: 253955 ( 56:28.05) 5:19:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 5:19:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 5:19:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:19:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 253956 (253956) = #253956/56:26.6 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 253956 blocks [Image Recorder] -------------------------------------------------------------- 5:19:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 520409088, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 253956 | lead-out | 1 | 0x41 | 0x00 5:19:47 PM #14 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 5:19:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:25:21 PM #16 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 253956 (3E004h), lenght 0 blocks 5:25:21 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:25:21 PM #18 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 5:25:25 PM #1 Text 0 File Burncd.cpp, Line 2868 TOSHIBA CD/DVDW SD-R5372 Buffer underrun protection activated 5:25:25 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 5:25:25 PM #3 Text 0 File Writer.cpp, Line 122 Writer TOSHIBA CD/DVDW SD-R5372 running 5:25:25 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 520409088 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=56:26.06 ( 253956) RecDep=0x00 MTYP: Mediumtype = CD (old format) (0x1) Image file name: <C:\Documents and Settings\Anthony1\My Documents\TempImage.nrg> 5:25:25 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using CD-R/RW media 5:25:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 253955 ( 56:28.05) 5:25:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 5:25:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: TOSHIBA CD/DVDW SD-R5372; CDR code: 00 97 24 16; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 5:25:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.) 5:25:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) provided original disc pos #0 + 253956 (253956) = #253956/56:26.6 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 253956 blocks [TOSHIBA CD/DVDW SD-R5372] -------------------------------------------------------------- 5:25:55 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 520409088, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 253956 | lead-out | 1 | 0x41 | 0x00 5:25:55 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 48x (7,200 KB/s) 5:25:55 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:25:55 PM #14 Text 0 File Mmc.cpp, Line 16452 StartDAO : CD-Text - Off 5:25:55 PM #15 Text 0 File Mmc.cpp, Line 21206 Set BUFE: Buffer underrun protection -> ON 5:25:55 PM #16 Text 0 File Mmc.cpp, Line 16739 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 38 1c 06 5:28:06 PM #17 Text 0 File WriterStatus.cpp, Line 116 <TOSHIBA CD/DVDW SD-R5372> start writing Lead-Out at LBA 253956 (3E004h), lenght 0 blocks 5:28:06 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:28:35 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 5:28:35 PM #20 CDR -1135 File ThreadedTransferInterface.cpp, Line 1867 Write error 5:28:35 PM #21 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867 Could not perform end of Disc-at-once 5:28:35 PM #22 CDR -201 File WriterStatus.cpp, Line 167 Invalid write state TOSHIBA CD/DVDW SD-R5372\H1 T1 5:28:35 PM #23 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 5:28:35 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 48x (7,200 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 1:16:24 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 5:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 12:23:54 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Lower the burn speed, if this does not fix the problem, still use a low burn speed but also turn off "on the fly" (disc at once) Have you had good results before? What media have you been using? Cheers.
thanks worked like a charm. i never used these CD-Rs be4 usually i can burn full speed all the time but these discs must suck. won't buy them again
I've read several instances that burning at this speed, can cause it's own set of probs. Have you had success at this speed?
