Hi, I was making DVDs using Nero all the time. Suddendly the past couple of burns have ended with "burn process failed". The first time this happened, I found out that the disk had not been finalised, and I had less the 2mb left on the disk, so I could not finalise it. I tried to burn another disk. This one also said burn process failed. But when i looked at the disk with the Nero InfoTool it said that the dvd was fine, and it looked like it should be working fine. I put it into a dvd player, but it dosen't recognise the disk, where as normally, with the other disks it has. But when it put it back into the PC I am able to play the DVD again. Does anybody know why it plays in the PC but not dvd players. Thanks
Have you changed your brand of discs, or have you changed your disc format, such as gone from +R to -R or vice versa. Also if the burn process has failed, post a Nero log, located here. Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx
No the disk are still the same, out of the same packet. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <PHILIPS DVDR1628P1> Version: Q2.3 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVDR1628P1 >Version: Q2.3 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75JHC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS DVDR1628P1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS DVDR1628P1 D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 84MB (86568kB) Memory in use : 66 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.8.2006 UDF compilation 1:38:47 AM #1 Text 0 File Isodoc.cpp, Line 6427 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 1:38:47 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 1:38:47 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:38:47 AM #4 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 1:38:55 AM #5 Phase 41 File dlgbrnst.cpp, Line 1730 Compilation will not fit onto a blank disc 1:39:07 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Unfortunately your multisession disc is now full. The remaining free space of 0 MB on this disc is insufficient to write your data of 2 MB. Therefore this multisession backup cannot be continued. 1:39:07 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:39:11 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PHILIPS DVDR1628P1, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 1:39:11 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 11:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 1C80-0000-19E5-MA2X-4004-5827-3394 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero API version: 7.2.3.2 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 3, 2 Recorder: <PHILIPS DVDR1628P1> Version: Q2.3 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75JHC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS DVDR1628P1 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS DVDR1628P1 D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 94MB (96760kB) Memory in use : 62 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.8.2006 NeroAPI 06:33:03 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 06:33:03 #2 Text 0 File Reader.cpp, Line 124 Reader running 06:33:03 #3 Text 0 File Writer.cpp, Line 113 Writer D: PHILIPS DVDR1628P1 running 06:33:03 #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 06:33:04 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 06:33:04 #6 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 06:33:04 #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3748511 (833:00.11, 7321MB) 06:33:04 #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 06:33:04 #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PHILIPS DVDR1628P1, Media type: DVD+R9 Double Layer 06:33:04 #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 06:33:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3748512 (3748512) = #3748512/833:0.12 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3748512 blocks [D: PHILIPS DVDR1628P1] -------------------------------------------------------------- 06:33:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: PHILIPS DVDR1628P1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7676952576, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3748512 | lead-out | 1 | 0x41 | 0x00 06:33:04 #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 06:33:04 #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 06:33:05 #15 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 06:33:05 #16 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 06:33:05 #17 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 06:33:05 #18 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 2.4x (3,324 KB/s) 06:33:05 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 06:33:05 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x0dcf8400: Len x804 06:33:05 #21 Text 0 File DVDPlusDualLayer.cpp, Line 635 L0 Data Zone Capacity set to 2086912 (1FD800h, 4076MB) -> OK, confirmed setting 06:33:05 #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 662 Burning Layer 1 06:33:05 #23 Text 0 File DVDPlusDualLayer.cpp, Line 672 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 06:33:05 #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x0dcf8400: Len x804 06:33:05 #25 Text 0 File DVDR.cpp, Line 6736 Drive: PHILIPS DVDR1628P1 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 06:33:05 #26 CDR -1207 File DVDR.cpp, Line 5871 Book Type automatically set to: DVD-ROM 06:33:05 #27 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: Yes 06:56:25 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 1E C8 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C Buffer x02f10000: Len x10000 0x00 00 01 BA 44 D6 FC EE A4 41 01 89 C3 F8 00 00 0x01 E0 07 EC 80 00 00 28 CA 49 E0 61 58 70 0A 43 0x53 CF 1F 00 3E 01 D9 48 21 A7 13 76 02 E1 0C C1 06:56:25 #29 CDR -1135 File Writer.cpp, Line 302 Write error D: PHILIPS DVDR1628P1 06:56:25 #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 06:56:25 #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 06:57:23 #32 Text 0 File DVDR.cpp, Line 6736 Drive: PHILIPS DVDR1628P1 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 06:57:23 #33 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
So that I could comment on 7.2.3.2b, I tried it to burn 3 AVI flies which I had successfully burned using version 7.0.8.2, sadly each burn was unsatisfactory so I reverted to 7.0.8.2, tried them again with success…my conclusion..7.2.3.2b was a failure when it comes to burn AVI files. I did the following, uninstalled 7.2.3.2b, ran this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then installed 7.0.8.2 from here http://www.filehippo.com/download_nero_7_premium/?845 It is recommended to have a minimum of 512meg RAM for burning, I would consider adding a further 256meg. Edit out your serial number. Not top quality discs, try Verbatim or Sony (made in japan) In your second log your DMA is off, it needs to be on, heres aguide to turn on http://forums.afterdawn.com/thread_view.cfm/260038
