Everytime I try to burn a movie onto disc it stops after 90% and says 'Illegal Disc'. The discs are new, Verbatim brand. Is it possible the problem lies in the fact that the movie I'm burning was transcoded using DivxToDVD? Whenever I play the DVD from my harddrive there's never any problems. Any help would greatly appreciated! Here is the log that Nero produces: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 07:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 16:33:44 Nero version: 6.3.1.25 (Nero Express) Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === DVD+RW RW8165 D: CDRom0 Generic DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515440kB) Free physical memory: 170MB (174460kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.11.2005 UDF/ISO compilation 11:15:43 #1 Phase 112 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation started 11:15:43 #2 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.IFO has been modified 11:15:43 #3 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.BUP has been modified 11:15:43 #4 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.IFO has been modified 11:15:43 #5 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.BUP has been modified 11:15:43 #6 Phase 113 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation completed 11:15:43 #7 Text 0 File Isodoc.cpp, Line 6083 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:15:43 #8 Phase 111 File dlgbrnst.cpp, Line 1855 DVD-Video files sorted 11:15:43 #9 Text 0 File Reader.cpp, Line 126 Reader running 11:15:43 #10 Text 0 File Writer.cpp, Line 124 Writer DVD+RW RW8165 running 11:15:43 #11 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:15:43 #12 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:15:43 #13 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 11:15:43 #14 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 803503 (178:33.28, 1569MB) 11:15:43 #15 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 11:15:43 #16 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: DVD+RW RW8165, Media type: DVD+R 11:15:43 #17 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:15:43 #18 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 803504 (803504) = #803504/178:33.29 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 803504 blocks [ DVD+RW RW8165 ] -------------------------------------------------------------- 11:15:43 #19 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ DVD+RW RW8165 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1645576192, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 803504 | lead-out | 1 | 0x00 | 0x41 11:15:43 #20 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 11:15:43 #21 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 11:15:43 #22 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 11:15:44 #23 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 4x (5,540 KB/s) 11:15:44 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:15:44 #25 SCSI -1066 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03616000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 11:15:44 #26 CDR -1207 File DVDR.cpp, Line 4509 Book Type automatically set to: DVD-ROM 11:15:44 #27 Text 0 File DVDR.cpp, Line 5297 Drive: DVD+RW RW8165 Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:15:44 #28 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 5:22,429 (322429ms) -> OK 11:15:44 #29 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: Yes 11:24:27 #30 SCSI -1046 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09F40000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x0B 0x0B 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x0B 0x01 0x90 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 11:24:27 #31 CDR -1046 File Writer.cpp, Line 304 Illegal disc 11:24:27 #32 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:24:27 #33 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 11:25:10 #34 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 11:25:11 #35 Text 0 File DVDR.cpp, Line 5297 Drive: DVD+RW RW8165 Book Type request: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:25:11 #36 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 11:25:11 #37 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 21:07:32 File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 06:53:02 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Just a couple of things I picked up...your Nero is very old, update that but not to Nero7, also your DMA is set to OFF, no doubt someone else will check it out in more depth.There shouldnt be a problem DivxToDVD I use it quiet often.
Hi there, As gwendolin mentioned, you Nero is quite old. Get the latest v6.6.0.16 Based on this webpage: http://forum.rpc1.org/dl_firmware.php?category=14&manufactor=39 Your DVD Burner is a Ricoh and v1.03 is the latest firmware for your drive... The logs mentioned you are using DVD+R but no media ID. What's the Media ID of those disks ? VSO Inspector v1.1 can tell you the media id. OR Once using Nero v6.6.0.16, it's usually displayed in the logs ! Try a slower burn (2x) on those media, they might be cheap, and might help burning at 2x on them !
@G101 - no-one's quoted that in this thread..... edit- yes i can see the quote now, dunno why Firefox can't search for it. Argh! ...however my opinion on Nero 7 is let everyone else be the guinea pigs for bugs and new 'features', why waste your own blak media when there are scores of ppl out there willing to sacrifice their time/media
Hi, Thanks everyone for all your advice. I upgraded my Nero to 6.6, but when I tried to burn again I had the same problem. Because the discs are 8x the slowest I can burn at is 4x (my laptop's maximum) - it wont let me burn any slower. This is the latest log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 07:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === DVD+RW RW8165 D: CDRom0 Generic DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515440kB) Free physical memory: 112MB (115016kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.11.2005 UDF/ISO compilation 17:03:17 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 17:03:17 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 17:03:17 #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 17:03:17 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 17:03:17 #5 Text 0 File Reader.cpp, Line 127 Reader running 17:03:17 #6 Text 0 File Writer.cpp, Line 122 Writer DVD+RW RW8165 running 17:03:17 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 17:03:17 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 17:03:17 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 17:03:17 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 983135 (218:28.35, 1920MB) 17:03:17 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 17:03:18 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVD+RW RW8165, Media type: DVD+R 17:03:18 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:03:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 983136 (983136) = #983136/218:28.36 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 983136 blocks [DVD+RW RW8165] -------------------------------------------------------------- 17:03:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2013462528, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 983136 | lead-out | 1 | 0x41 | 0x00 17:03:18 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 17:03:18 #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 17:03:18 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 17:03:18 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 17:03:18 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:03:18 #21 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06700600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 17:03:18 #22 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 17:03:18 #23 Text 0 File DVDR.cpp, Line 5896 Drive: DVD+RW RW8165 Book Type request [gen]: Physical disc type, write to EEPROM Changing the Book Type was finished successfully, return code 0 17:03:18 #24 CDR -1207 File DVDR.cpp, Line 5065 Book Type automatically set to: Physical disc type 17:03:18 #25 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 17:12:06 #26 SCSI -1046 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06080000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x0B 0x0B 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x0B 0x01 0x90 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 17:12:06 #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 17:12:06 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 17:12:06 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 17:12:08 #30 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x05 0x00 0x0B 0x01 0x90 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 17:12:08 #31 SCSI -1176 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x039A5200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x72 0x03 17:12:08 #32 CDR -1046 File WriterStatus.cpp, Line 167 Illegal disc DVD+RW RW8165\H1 T0 17:12:08 #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 17:12:08 #34 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 21:07:32 File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 06:53:02 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
..in addition to the other comments... - try to close down more programs prior to dvd work/burning to free up more memory - the burner can't recognise that disc properly, here's an example (not the best example as it's CMC but it's an example) of what it should look like - - you should have a 3line paragraph describing the disc when the firmware recognises the disc; your discs must be newer than your firmware knows what to do with. identify one of those discs as per cougar_ii's request. it won't help you use those discs but it helps us work out which discs they are - see previous comment
I don't see much, except the few below. 1.03 looks like the latest firmware. However, it can not recognize the media's manufacture id code. If you can google/search the net for any newer firmware to see if that'll help. What kind of media you're using by chance? My top 3 choices of media are Taiyo Yuden, Verbatim and Maxell (made in japan) -- they're top notch. Looks like your burner doesn't like the media you're using here. Try another high quality media like Yuden, Verbatim or Maxell (m.i.j) and see if you'll have a successful result. Something is not right here, see above reply for better media.
Hi, thanks for your help creaky, cougar & alkohol. I've downloaded DVD Identifier, and these are the results for one my unused Verbatim DVDs. (I've been using Verbatim DVDs throughout - don't suppose it makes any difference that I bought them eBay? They look genuine!) ---------------------------------------------------------------------------- Unique Disc Identifier : [DVD+R:RITEK-R03-002] ---------------------------------------------------------------------------- Disc & Book Type : [DVD+R] - [Not Available] Manufacturer Name : [Ritek Corp.] Manufacturer ID : [RITEK] Media Type ID : [R03] Product Revision : [002] Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)] Recording Speeds : [1x-2.4x , 4x , 6x-8x] ---------------------------------------------------------------------------- [ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ] ---------------------------------------------------------------------------- ALSO, under 'Drive Capabilities on this Disc' it says: ** INFO : Drive = (null) DVD+RW RW8165 [FW 1.03] ** INFO : Write Capabilities = DVD+R DVD+RW ** INFO : Disc = [DVD+R:RITEK-R03-002] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 5408 kBps ( 4.00x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 2823 kBps ( 2.04x) - [CLV/Non-Pure CAV] I hope this can be of help. Thanks again.
@alkohol - you're psychic my friend methinks you're being mesmerized by that honey in your signature (or i'm replying to threads i know you're gonna answer just so i can see that signature) :O
@Creaky How's it going buddy? LOL.... my honey looks very sexy, exotic and lovely at the same time -- you will be hypnotized by her easily, lol. Little off topic here, anyways, this is not the "anyone seen any great movie(s) lately" thread in the "all other topics," but I thought I saw you mentioned that you're going to watch Jackie's Project A & Project A: II. Honestly, I think part 2 is not as good as the first part - the actions are not on par with the first part, but comedy is roughly about the same. I highly recommend Jackie's New Police Story (2005) - this one is not the usual comedy type, instead it's more like a drama (a different kind of Jackie), and again the actions are good as usual.
