burning a movie saved on the computer an it says its burning it but when is done the cd still blank, and there is nothing writen on the disc. I am using Nero 7.0.1.2 Ultra Edition plz help. The Nero log that I found is as follows: === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 132MB (135400kB) Memory in use : 73 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 9:31:03 AM #1 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:31:03 AM #2 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 9:31:04 AM #3 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:31:04 AM #4 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:31:04 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 9:31:04 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 9:31:04 AM #7 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 9:31:04 AM #8 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2292403 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 9:31:04 AM #9 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 2292403 = 2292403, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:31:04 AM #10 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 9:31:04 AM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2292402 (509:25.27, 4477MB) 9:31:04 AM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:31:04 AM #13 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:31:04 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2292403 (2292403) = #2292403/509:25.28 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292403 blocks [Image Recorder] -------------------------------------------------------------- 9:31:04 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4694841344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2292403 | lead-out | 1 | 0x41 | 0x00 9:31:04 AM #16 Phase 120 File dlgbrnst.cpp, Line 1730 Creating the image for burning 9:31:04 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:40:53 AM #18 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 2292403 (22FAB3h), length 0 blocks 9:40:53 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:40:54 AM #20 Phase 121 File dlgbrnst.cpp, Line 1730 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 9:41:17 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 9:41:17 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 9:41:17 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 9:41:22 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4694841344 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=509:25.28 ( 2292403) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 9:41:23 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 10:03:31 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 2292402 (509:25.27, 4477MB) 10:03:31 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:03:31 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:03:31 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 10:03:31 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2292403 (2292403) = #2292403/509:25.28 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292403 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 10:03:31 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4694841344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2292403 | lead-out | 1 | 0x41 | 0x00 10:03:31 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:03:31 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:03:31 AM #14 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 16x (22,160 KB/s) 10:03:31 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:03:31 AM #16 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 10:03:31 AM #17 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 10:03:31 AM #18 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:08:44 AM #19 SPTI -1093 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 1E 24 E0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02 Buffer x044d0000: Len x10000 0x00 00 01 BA 45 BF BC 16 DD 01 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 55 AB DD 38 6B 0C DB E4 49 0xA8 68 C5 65 94 3E 27 83 74 1D CD D8 8B 64 02 19 10:08:44 AM #20 CDR -1093 File Writer.cpp, Line 302 No seek complete E: HP DVD Writer 740b 10:08:45 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:08:45 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:08:45 AM #23 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 1975519 10:08:45 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 37MB (38196kB) Memory in use : 92 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 10:11:32 AM #1 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:11:32 AM #2 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 10:11:33 AM #3 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:11:33 AM #4 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:11:33 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 10:11:33 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 10:11:33 AM #7 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 10:11:33 AM #8 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2233728 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:11:33 AM #9 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 2233728 = 2233728, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:11:33 AM #10 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 10:11:33 AM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2233727 (496:23.02, 4362MB) 10:11:33 AM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:11:33 AM #13 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:11:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2233728 (2233728) = #2233728/496:23.3 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233728 blocks [Image Recorder] -------------------------------------------------------------- 10:11:33 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4574674944, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2233728 | lead-out | 1 | 0x41 | 0x00 10:11:33 AM #16 Phase 120 File dlgbrnst.cpp, Line 1730 Creating the image for burning 10:11:34 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:21:22 AM #18 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 2233728 (221580h), length 0 blocks 10:21:22 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:21:23 AM #20 Phase 121 File dlgbrnst.cpp, Line 1730 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:21:43 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:21:43 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 10:21:43 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 10:21:43 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4574674944 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=496:23.03 ( 2233728) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 10:21:45 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 10:23:20 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 2233727 (496:23.02, 4362MB) 10:23:20 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:23:20 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:23:20 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 10:23:20 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2233728 (2233728) = #2233728/496:23.3 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233728 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 10:23:20 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4574674944, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2233728 | lead-out | 1 | 0x41 | 0x00 10:23:20 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:23:20 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:23:20 AM #14 Phase 28 File dlgbrnst.cpp, Line 1730 Speed measurement started 10:23:20 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:25:28 AM #16 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 2233728 (221580h), length 0 blocks 10:25:28 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:25:28 AM #18 Phase 29 File dlgbrnst.cpp, Line 1679 Speed measurement completed: 26.5x (36,684 KB/s) 10:25:28 AM #19 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2x (2,770 KB/s) 10:25:28 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:25:28 AM #21 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 10:25:28 AM #22 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 10:25:28 AM #23 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:53:12 AM #24 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 2233728 (221580h), length 0 blocks 10:53:12 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:53:13 AM #26 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 2233727 10:54:07 AM #27 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 2x (2,770 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.2.0.3 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 285MB (291976kB) Memory in use : 43 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.6.2006 DVD-Copy over Image 10:58:55 AM #1 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:58:55 AM #2 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 10:58:56 AM #3 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:58:56 AM #4 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:58:56 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 10:58:56 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 10:58:57 AM #7 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 2044143 / 0x1F30EF / 3992MB S01 T01 Con 0x14 Start 0 Len 4080085 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:58:57 AM #8 CDCOPY -33 File DVDCopy.cpp, Line 342 This DVD is copy-protected and cannot be read Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.2.0.3 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 252MB (258512kB) Memory in use : 49 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.6.2006 DVD-Copy over Image 11:06:55 AM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:06:55 AM #2 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:06:55 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 11:06:55 AM #4 Text 0 File Reader.cpp, Line 124 Reader running 11:06:55 AM #5 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 2069535 / 0x1F941F / 4042MB S01 T01 Con 0x14 Start 0 Len 4138446 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:06:55 AM #6 CDCOPY -33 File DVDCopy.cpp, Line 342 This DVD is copy-protected and cannot be read Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.2.0.3 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 213MB (218256kB) Memory in use : 57 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.6.2006 DVD-Copy over Image 11:18:33 AM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:18:33 AM #2 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:18:33 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 11:18:33 AM #4 Text 0 File Reader.cpp, Line 124 Reader running 11:18:33 AM #5 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 2069535 / 0x1F941F / 4042MB S01 T01 Con 0x14 Start 0 Len 4138446 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:18:33 AM #6 CDCOPY -33 File DVDCopy.cpp, Line 342 This DVD is copy-protected and cannot be read Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 87MB (89476kB) Memory in use : 82 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 11:23:23 AM #1 SPTI -1033 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 01 11:23:45 AM #2 SPTI -1066 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x0351c800: Len x1008 11:23:50 AM #3 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:23:50 AM #4 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:23:50 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 11:23:50 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 11:23:50 AM #7 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 11:23:50 AM #8 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2292403 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:23:50 AM #9 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 2292403 = 2292403, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:23:50 AM #10 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 11:23:50 AM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2292402 (509:25.27, 4477MB) 11:23:50 AM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:23:50 AM #13 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:23:50 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2292403 (2292403) = #2292403/509:25.28 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292403 blocks [Image Recorder] -------------------------------------------------------------- 11:23:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4694841344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2292403 | lead-out | 1 | 0x41 | 0x00 11:23:50 AM #16 Phase 120 File dlgbrnst.cpp, Line 1730 Creating the image for burning 11:23:50 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:36:49 AM #18 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 2292403 (22FAB3h), length 0 blocks 11:36:49 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:36:51 AM #20 Phase 121 File dlgbrnst.cpp, Line 1730 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 11:37:14 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 11:37:14 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 11:37:14 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 11:37:17 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4694841344 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=509:25.28 ( 2292403) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 11:37:18 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 11:37:50 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 2292402 (509:25.27, 4477MB) 11:37:50 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:37:50 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 11:37:50 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 11:37:50 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2292403 (2292403) = #2292403/509:25.28 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292403 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 11:37:50 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4694841344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2292403 | lead-out | 1 | 0x41 | 0x00 11:37:50 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:37:50 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:37:50 AM #14 Phase 28 File dlgbrnst.cpp, Line 1730 Speed measurement started 11:37:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:41:03 AM #16 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 2292403 (22FAB3h), length 0 blocks 11:41:03 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:41:03 AM #18 Phase 29 File dlgbrnst.cpp, Line 1679 Speed measurement completed: 18x (24,894 KB/s) 11:41:03 AM #19 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 16x (22,160 KB/s) 11:41:03 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:41:03 AM #21 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 11:41:03 AM #22 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 11:41:03 AM #23 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:46:11 AM #24 SPTI -1093 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 1E 69 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02 Buffer x044c0000: Len x10000 0x00 00 01 BA 45 C3 96 24 94 AB 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 CB F7 04 CA B6 6C 1E 5C DA 0x57 B6 E8 10 9B 91 B8 BA 5E B6 B2 38 1F 7A D7 76 11:46:11 AM #25 CDR -1093 File Writer.cpp, Line 302 No seek complete E: HP DVD Writer 740b 11:46:11 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:46:12 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:46:12 AM #28 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 1992991 11:46:12 AM #29 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 71MB (73288kB) Memory in use : 85 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.6.2006 NeroAPI 12:17:50 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 12:17:51 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 12:17:51 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 12:17:51 AM #4 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 12:17:51 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:17:51 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:17:51 AM #7 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 12:17:52 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 1761407 (391:25.32, 3440MB) 12:17:52 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 12:17:52 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 12:17:52 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:17:52 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1761408 (1761408) = #1761408/391:25.33 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1761408 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 12:17:52 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3607363584, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1761408 | lead-out | 1 | 0x41 | 0x00 12:17:52 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:17:52 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:17:52 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 12:17:52 AM #17 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 12:17:52 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 12:17:52 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 16x (22,160 KB/s) 12:17:52 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:17:52 AM #21 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 12:17:52 AM #22 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 12:17:52 AM #23 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:24:28 AM #24 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 1761408 (1AE080h), length 0 blocks 12:24:28 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:24:28 AM #26 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 1761407 12:24:51 AM #27 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 44MB (45876kB) Memory in use : 91 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 1:31:56 AM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:31:56 AM #2 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:31:56 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 1:31:56 AM #4 Text 0 File Reader.cpp, Line 124 Reader running 1:31:56 AM #5 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 1:31:56 AM #6 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 1689232 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 1:31:56 AM #7 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 1689232 = 1689232, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 1:31:56 AM #8 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 1:31:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1689231 (375:23.06, 3299MB) 1:31:57 AM #10 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:31:57 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:31:57 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1689232 (1689232) = #1689232/375:23.7 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1689232 blocks [Image Recorder] -------------------------------------------------------------- 1:31:57 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3459547136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1689232 | lead-out | 1 | 0x41 | 0x00 1:31:57 AM #14 Phase 120 File dlgbrnst.cpp, Line 1730 Creating the image for burning 1:31:57 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:39:48 AM #16 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 1689232 (19C690h), length 0 blocks 1:39:48 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:39:49 AM #18 Phase 121 File dlgbrnst.cpp, Line 1730 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 1:40:33 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:40:33 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 1:40:33 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 1:40:34 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3459547136 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=375:23.07 ( 1689232) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 1:40:35 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 1:41:32 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 1689231 (375:23.06, 3299MB) 1:41:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:41:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 1:41:32 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 1:41:32 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1689232 (1689232) = #1689232/375:23.7 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1689232 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 1:41:32 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3459547136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1689232 | lead-out | 1 | 0x41 | 0x00 1:41:32 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:41:32 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:41:32 AM #14 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 16x (22,160 KB/s) 1:41:32 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:41:32 AM #16 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 1:41:32 AM #17 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 1:41:32 AM #18 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:49:23 AM #19 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 1689232 (19C690h), length 0 blocks 1:49:23 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:49:24 AM #21 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 1689231 1:49:52 AM #22 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 119MB (122440kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 2:24:42 AM #1 SPTI -1033 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 01 2:24:58 AM #2 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:24:58 AM #3 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:24:58 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 2:24:58 AM #5 Text 0 File Reader.cpp, Line 124 Reader running 2:24:58 AM #6 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 2:24:58 AM #7 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 1667872 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 2:24:58 AM #8 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 1667872 = 1667872, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 2:24:58 AM #9 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 2:24:59 AM #10 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1667871 (370:38.21, 3257MB) 2:24:59 AM #11 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 2:24:59 AM #12 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:24:59 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1667872 (1667872) = #1667872/370:38.22 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1667872 blocks [Image Recorder] -------------------------------------------------------------- 2:24:59 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3415801856, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1667872 | lead-out | 1 | 0x41 | 0x00 2:24:59 AM #15 Phase 120 File dlgbrnst.cpp, Line 1730 Creating the image for burning 2:24:59 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 2:35:39 AM #17 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 1667872 (197320h), length 0 blocks 2:35:39 AM #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:35:44 AM #19 Phase 121 File dlgbrnst.cpp, Line 1730 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 2:36:06 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 2:36:06 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 2:36:06 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 2:36:07 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3415801856 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=370:38.22 ( 1667872) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 2:36:08 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 8:36:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 1667871 (370:38.21, 3257MB) 8:36:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 8:36:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 8:36:06 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 8:36:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1667872 (1667872) = #1667872/370:38.22 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1667872 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 8:36:06 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3415801856, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1667872 | lead-out | 1 | 0x41 | 0x00 8:36:06 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:36:06 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:36:06 AM #14 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 16x (22,160 KB/s) 8:36:06 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:36:06 AM #16 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 8:36:06 AM #17 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 8:36:06 AM #18 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:48:53 AM #19 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 1667872 (197320h), length 0 blocks 8:48:54 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:48:54 AM #21 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 1667871 8:49:18 AM #22 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Carlos Ramos family 1C83-7613-10E5-477X-4022-6KM5-4KC2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 86MB (88592kB) Memory in use : 82 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 8:59:44 AM #1 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 8:59:44 AM #2 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 8:59:45 AM #3 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:59:45 AM #4 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:59:45 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 8:59:45 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 8:59:45 AM #7 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 8:59:45 AM #8 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD+R S01 T01 Con 0x14 Start 0 Len 1601232 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 8:59:45 AM #9 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 1601232 = 1601232, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 8:59:45 AM #10 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 8:59:45 AM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1601231 (355:49.56, 3127MB) 8:59:45 AM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 8:59:45 AM #13 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:59:45 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1601232 (1601232) = #1601232/355:49.57 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1601232 blocks [Image Recorder] -------------------------------------------------------------- 8:59:45 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3279323136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1601232 | lead-out | 1 | 0x41 | 0x00 8:59:45 AM #16 Phase 120 File dlgbrnst.cpp, Line 1730 Creating the image for burning 8:59:45 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:09:59 AM #18 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 1601232 (186ED0h), length 0 blocks 9:09:59 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:09:59 AM #20 Phase 121 File dlgbrnst.cpp, Line 1730 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 9:10:18 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 9:10:18 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 9:10:18 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 9:10:22 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3279323136 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=355:49.57 ( 1601232) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 9:10:22 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 9:21:55 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 1601231 (355:49.56, 3127MB) 9:21:55 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:21:55 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 9:21:55 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 9:21:55 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1601232 (1601232) = #1601232/355:49.57 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1601232 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 9:21:55 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3279323136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1601232 | lead-out | 1 | 0x41 | 0x00 9:21:55 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:21:55 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:21:55 AM #14 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 12x (16,620 KB/s) 9:21:55 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:21:55 AM #16 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 9:21:55 AM #17 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 9:21:55 AM #18 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:28:04 AM #19 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 1601232 (186ED0h), length 0 blocks 9:28:04 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:28:04 AM #21 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 1601231 9:28:30 AM #22 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 12x (16,620 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 5C82-0010-8011-0000-8595-5521-3208 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 (Nero Express) Recorder: <HP DVD Writer 740b> Version: ED24 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740b >Version: ED24 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 740b E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 51MB (52840kB) Memory in use : 89 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 9:20:42 PM #1 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:20:42 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 192KB of Memory 9:20:42 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:20:42 PM #4 Text 0 File Writer.cpp, Line 113 Writer Image Recorder running 9:20:42 PM #5 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 1928672 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 9:20:42 PM #6 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 1928672 = 1928672, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:20:42 PM #7 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 9:20:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1928671 (428:35.46, 3766MB) 9:20:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 9:20:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:20:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1928672 (1928672) = #1928672/428:35.47 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1928672 blocks [Image Recorder] -------------------------------------------------------------- 9:20:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3949920256, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1928672 | lead-out | 1 | 0x41 | 0x00 9:20:42 PM #13 Phase 120 File dlgbrnst.cpp, Line 1725 Creating the image for burning 9:20:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:32:45 PM #15 Text 0 File WriterStatus.cpp, Line 116 <Image Recorder> start writing Lead-Out at LBA 1928672 (1D6DE0h), length 0 blocks 9:32:45 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:32:45 PM #17 Phase 121 File dlgbrnst.cpp, Line 1725 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 9:33:22 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 9:33:22 PM #2 Text 0 File Reader.cpp, Line 124 Reader running 9:33:22 PM #3 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 740b running 9:33:23 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3949920256 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=428:35.47 ( 1928672) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\HP_Owner\My Documents\TempImage.nrg> 9:33:25 PM #5 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 10:29:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2297903 (510:38.53, 4488MB) Last address to be written: 1928671 (428:35.46, 3766MB) 10:29:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:29:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: HP DVD Writer 740b, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:29:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 10:29:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1928672 (1928672) = #1928672/428:35.47 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1928672 blocks [E: HP DVD Writer 740b] -------------------------------------------------------------- 10:29:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 740b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3949920256, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1928672 | lead-out | 1 | 0x41 | 0x00 10:29:38 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:29:39 PM #13 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 16x (22,160 KB/s) 10:29:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:29:39 PM #15 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 10:29:39 PM #16 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 10:29:39 PM #17 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 10:29:39 PM #18 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:38:30 PM #19 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 740b> start writing Lead-Out at LBA 1928672 (1D6DE0h), length 0 blocks 10:38:30 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:38:30 PM #21 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 1928671 10:38:57 PM #22 Phase 37 File dlgbrnst.cpp, Line 1725 Burn process completed successfully at 16x (22,160 KB/s) 10:38:59 PM #23 Phase 78 File dlgbrnst.cpp, Line 1725 Data verification started 10:50:39 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:50:40 PM #25 Phase 80 File dlgbrnst.cpp, Line 1725 Data verification completed successfully Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 6:03:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ======
[bold]Not according to your logs[/bold] These are horrible discs, try Verbatim or sony (made in japan) Way too fast, slow to 4X Edit out your serial number Heres my suggestion Nero API version: 7.2.0.3 and 7.2.0.3b These latest versions of Nero are full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here http://www.filehippo.com/download_nero_7_premium/?845 Try to free up some memory, however this is one thing that this version does, use lots of memory You have several logs here, but the main thing is get rid of 7.2.0.3 get different discs and burn at 4X
I uninstall the other version and I am downloading the 7.0.8.2 version that you told me. How can I edit out my serial number? Thanks a lot for all your help so far. vr. carlucho
It looks like you have more than your serial number, also your family name. There are several instances of it. To edit your post, click on the upper right of the message. The log file usually has one entry for every burn attempt. The last entries are the newest. If you can see where they start and end, you might remove some of the earlier ones at the top to make it easier to read. Especially when you have changed versions as you did. The one question I have, if you look at the DVD that doesn't show anything, does it appear to have been written on? If you don't know what I mean by that, just compare that DVD with a new one and see if there is any difference in coloration on the burning side.
