Nero Burning Problem

I have an error message coming up that i have never seen before. I was able to shrink the movie just fine like i have with all the other ones i have done. I went to burn the movie and everything seemed fine. I get about halfway through the movie and Nero spits the disk (HalfBurned) out and says Nero could not finish this process because i dont have the proper files needed. Now that isnt an exact quote because i dont want to waste another DVD seeing i have done 3 already. Anyone know what might be wrong? Its is Nero 6. I have used it for the 300 DVD's ive done up until now. Why all of a sudden would i have this trouble. I use DVD Shrink 3.2 the newest version, and DVD Decypter. Im puzzled and pissed. please help.

 

Find your Nero log and post it (being sure to edit out your serial number first).

 

Where do i find my Nero Log?

 

same shit ere mate!! ive had it with nero.one minuteits working slow but fine,the next your jus wasting your time n money.its a shame because it takes the hard work and does it for you but too unreliable!! good luk with it!

 

Yeah. i have a feeling they have put something in the newer disks that is causing this error. I had the problem with precint 13 and anoter movie. I am going to try Team America and White Noise now and see what happens this time i will write down the error message.

 

Well i got the error again. I saved it but it is 86 pages long.
But this is the error that keeps showing up over and over. I have no clue what it means.

10:36:59 AM #22 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

 

I think that's a "media not sensed" error.
Don't post 86 pages..just scroll down to the last attempt section and post that.
Or rename your old log and then attempt again, this will make a new log.
Your choice, but we need to see one entire attempt.

 

Im @ work right now. But when i get home around 5pm EST i will post the last attempt.

 

11:01:21 AM #1000 Text 0 File Writer.cpp, Line 318
11:01:21.825 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

is this what you are looking for?

 

11:00:46 AM #976 Text 0 File Writer.cpp, Line 318
11:00:46.716 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:48 AM #977 Text 0 File Writer.cpp, Line 318
11:00:48.154 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:49 AM #978 Text 0 File Writer.cpp, Line 318
11:00:49.482 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:51 AM #979 Text 0 File Writer.cpp, Line 318
11:00:51.060 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:52 AM #980 Text 0 File Writer.cpp, Line 318
11:00:52.450 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:53 AM #981 Text 0 File Writer.cpp, Line 318
11:00:53.888 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:55 AM #982 Text 0 File Writer.cpp, Line 318
11:00:55.279 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:56 AM #983 Text 0 File Writer.cpp, Line 318
11:00:56.685 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:58 AM #984 Text 0 File Writer.cpp, Line 318
11:00:58.060 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:00:59 AM #985 Text 0 File Writer.cpp, Line 318
11:00:59.888 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:01 AM #986 Text 0 File Writer.cpp, Line 318
11:01:01.560 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:03 AM #987 Text 0 File Writer.cpp, Line 318
11:01:03.029 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:04 AM #988 Text 0 File Writer.cpp, Line 318
11:01:04.654 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:05 AM #989 Text 0 File Writer.cpp, Line 318
11:01:05.982 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:07 AM #990 Text 0 File Writer.cpp, Line 318
11:01:07.466 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:08 AM #991 Text 0 File Writer.cpp, Line 318
11:01:08.935 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:10 AM #992 Text 0 File Writer.cpp, Line 318
11:01:10.341 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:11 AM #993 Text 0 File Writer.cpp, Line 318
11:01:11.888 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:13 AM #994 Text 0 File Writer.cpp, Line 318
11:01:13.279 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:14 AM #995 Text 0 File Writer.cpp, Line 318
11:01:14.654 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:16 AM #996 Text 0 File Writer.cpp, Line 318
11:01:16.169 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:17 AM #997 Text 0 File Writer.cpp, Line 318
11:01:17.763 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:19 AM #998 Text 0 File Writer.cpp, Line 318
11:01:19.138 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:20 AM #999 Text 0 File Writer.cpp, Line 318
11:01:20.497 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

11:01:21 AM #1000 Text 0 File Writer.cpp, Line 318
11:01:21.825 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)

or is this better?

 

Here is what a complete section of log file looks like.
The file is called NeroHistory.log - scroll to bottom to find
the last section beginning this way.

====== *** NeroAPI, History File *** ======
**Edited computer name and Edited Serial Number**
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-5160D>Version: A302 - HA 2 TA 0 - 6.3.1.12
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-5160D>Version: A302 - HA 2 TA 0 - 6.3.1.12
Adapter driver: <> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVVA07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120026A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PHILIPS PCRW804 atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
PHILIPS PCRW804 D: CDRom0
HL-DT-ST DVDRAM GSA-5160 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1535MB (1572340kB)
Free physical memory: 1111MB (1137900kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.5.2005
UDF/ISO compilation
7:17:30 AM #1 Phase 112 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation started

7:17:30 AM #2 Phase 114 File dlgbrnst.cpp, Line 1836
DVD-Video files reallocation completed (no file modified)

7:17:30 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:17:30 AM #4 Phase 111 File dlgbrnst.cpp, Line 1836
DVD-Video files sorted

7:17:30 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

7:17:30 AM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-5160D running

7:17:30 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:17:30 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:17:30 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

7:17:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202143 (489:21.68, 4301MB)

7:17:30 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

7:17:30 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRAM GSA-5160D, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

7:17:30 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:17:30 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [HL-DT-ST DVDRAM GSA-5160D]
--------------------------------------------------------------

7:17:30 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-5160D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2202144 | lead-out | 1 | 0x00 | 0x41

7:17:30 AM #16 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

7:17:30 AM #17 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

7:17:30 AM #18 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

7:17:30 AM #19 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 4x (5,540 KB/s)

7:17:30 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:17:30 AM #21 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC.....
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

7:17:30 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 13:47,353 (827353ms) -> OK

7:17:30 AM #23 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

7:31:16 AM #24 Text 0 File WriterStatus.cpp, Line 115
<HL-DT-ST DVDRAM GSA-5160D> start writing Lead-Out at LBA 2202144 (219A20h), lenght 0 blocks

7:31:17 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:31:43 AM #26 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

7:31:43 AM #27 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

7:31:43 AM #28 Phase 37 File dlgbrnst.cpp, Line 1836
Burn process completed successfully at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 4:02:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

 

I try not to clutch at straws, but it occurred to me that I use Win XP and have disabled IMAPI CD BURNING COM SERVICE. It could be you used to have this option disabled too but with the reinstall are back at defaults.

 

====== *** NeroAPI, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM
Nero API version: 6.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 637MB (653296kB)
Free physical memory: 303MB (310320kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.5.2005
NeroAPI
1:44:47 AM #1 Phase 112 File APIProgress.cpp, Line 232
DVD-Video files reallocation started

It starts at # 1 and goes all the way to #1000

11:01:21 AM #1000 Text 0 File Writer.cpp, Line 318
11:01:21.825 - PIONEER DVD-RW DVR-106D : Queue again later (Intervall : 11msec)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/8/2004 8:48:52 AM (Prassi/Veritas driver for win 2K)


Does this help?

 

Just a couple of things...
First I think you need to update your Nero the current version is 6.6.0.13.

Second, it looks like your DMA is not enabled so that does not help. Just do a search for "enable DMA". There has been a lot written about it.

Here is one link...
http://home.comcast.net/~bbmayo/DMA.html

Are those comlete burn logs you are posting? Just post the whole thing. We like that.

 

Ok. I updated my NERO. I went to the store and bout Nero 6.0. i then downloaded the update for it. Everything is installed. I then tried to burn a movie. I am still getting the error. This is the error i got. I dont know how to enable that thing you said. I did a search for it but i had no luck. So if someone could walk me through how to do that, that might help. Any other suggestions on how all of a sudden it wouldnt work, and then buying a brand new version with the updates and still having problems. AHHHH i am getting frusterated. PLEASE HELP!

Windows XP 5.1

WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c

Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 637MB (653296kB)
Free physical memory: 340MB (349128kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.5.2005
NeroAPI
9:22:34 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

9:22:34 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

9:22:34 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

9:22:34 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

9:22:34 PM #5 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-106D running

9:22:34 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:22:35 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:22:35 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:22:35 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

9:34:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

9:34:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

9:34:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193

9:34:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

9:34:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

9:34:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

9:34:24 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

9:34:24 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

9:34:24 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

9:34:24 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

9:34:24 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:34:24 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

9:34:24 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

9:34:24 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

9:34:24 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:34:55 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
21:34:55.092 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:26 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
21:35:26.295 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:27 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
21:35:27.545 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:28 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
21:35:28.874 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:30 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
21:35:30.124 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:31 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
21:35:31.342 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:32 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
21:35:32.545 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:33 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
21:35:33.686 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:34 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
21:35:34.936 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:36 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
21:35:36.170 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:37 PM #35 Text 0 File Cdrdrv.cpp, Line 1288
21:35:37.545 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:38 PM #36 Text 0 File Cdrdrv.cpp, Line 1288
21:35:38.733 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:40 PM #37 Text 0 File Cdrdrv.cpp, Line 1288
21:35:40.092 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:41 PM #38 Text 0 File Cdrdrv.cpp, Line 1288
21:35:41.327 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:42 PM #39 Text 0 File Cdrdrv.cpp, Line 1288
21:35:42.514 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:43 PM #40 Text 0 File Cdrdrv.cpp, Line 1288
21:35:43.811 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:45 PM #41 Text 0 File Cdrdrv.cpp, Line 1288
21:35:45.202 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:46 PM #42 Text 0 File Cdrdrv.cpp, Line 1288
21:35:46.499 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:47 PM #43 Text 0 File Cdrdrv.cpp, Line 1288
21:35:47.827 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:49 PM #44 Text 0 File Cdrdrv.cpp, Line 1288
21:35:49.139 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:50 PM #45 Text 0 File Cdrdrv.cpp, Line 1288
21:35:50.405 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:51 PM #46 Text 0 File Cdrdrv.cpp, Line 1288
21:35:51.561 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:52 PM #47 Text 0 File Cdrdrv.cpp, Line 1288
21:35:52.842 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:54 PM #48 Text 0 File Cdrdrv.cpp, Line 1288
21:35:54.124 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:55 PM #49 Text 0 File Cdrdrv.cpp, Line 1288
21:35:55.405 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:56 PM #50 Text 0 File Cdrdrv.cpp, Line 1288
21:35:56.717 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:58 PM #51 Text 0 File Cdrdrv.cpp, Line 1288
21:35:58.014 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:35:59 PM #52 Text 0 File Cdrdrv.cpp, Line 1288
21:35:59.280 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:00 PM #53 Text 0 File Cdrdrv.cpp, Line 1288
21:36:00.592 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:01 PM #54 Text 0 File Cdrdrv.cpp, Line 1288
21:36:01.827 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:03 PM #55 Text 0 File Cdrdrv.cpp, Line 1288
21:36:03.202 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:04 PM #56 Text 0 File Cdrdrv.cpp, Line 1288
21:36:04.530 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:05 PM #57 Text 0 File Cdrdrv.cpp, Line 1288
21:36:05.811 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:07 PM #58 Text 0 File Cdrdrv.cpp, Line 1288
21:36:07.030 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:08 PM #59 Text 0 File Cdrdrv.cpp, Line 1288
21:36:08.389 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:09 PM #60 Text 0 File Cdrdrv.cpp, Line 1288
21:36:09.608 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:10 PM #61 Text 0 File Cdrdrv.cpp, Line 1288
21:36:10.795 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:12 PM #62 Text 0 File Cdrdrv.cpp, Line 1288
21:36:12.061 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:13 PM #63 Text 0 File Cdrdrv.cpp, Line 1288
21:36:13.295 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:14 PM #64 Text 0 File Cdrdrv.cpp, Line 1288
21:36:14.592 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:15 PM #65 Text 0 File Cdrdrv.cpp, Line 1288
21:36:15.889 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:17 PM #66 Text 0 File Cdrdrv.cpp, Line 1288
21:36:17.108 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:18 PM #67 Text 0 File Cdrdrv.cpp, Line 1288
21:36:18.405 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:19 PM #68 Text 0 File Cdrdrv.cpp, Line 1288
21:36:19.670 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:21 PM #69 Text 0 File Cdrdrv.cpp, Line 1288
21:36:21.061 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:22 PM #70 Text 0 File Cdrdrv.cpp, Line 1288
21:36:22.327 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:23 PM #71 Text 0 File Cdrdrv.cpp, Line 1288
21:36:23.592 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:24 PM #72 Text 0 File Cdrdrv.cpp, Line 1288
21:36:24.905 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:26 PM #73 Text 0 File Cdrdrv.cpp, Line 1288
21:36:26.124 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:27 PM #74 Text 0 File Cdrdrv.cpp, Line 1288
21:36:27.436 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:28 PM #75 Text 0 File Cdrdrv.cpp, Line 1288
21:36:28.749 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:29 PM #76 Text 0 File Cdrdrv.cpp, Line 1288
21:36:29.936 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:31 PM #77 Text 0 File Cdrdrv.cpp, Line 1288
21:36:31.264 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:32 PM #78 Text 0 File Cdrdrv.cpp, Line 1288
21:36:32.577 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:33 PM #79 Text 0 File Cdrdrv.cpp, Line 1288
21:36:33.983 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:35 PM #80 Text 0 File Cdrdrv.cpp, Line 1288
21:36:35.264 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:36 PM #81 Text 0 File Cdrdrv.cpp, Line 1288
21:36:36.530 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:37 PM #82 Text 0 File Cdrdrv.cpp, Line 1288
21:36:37.858 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:39 PM #83 Text 0 File Cdrdrv.cpp, Line 1288
21:36:39.186 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:40 PM #84 Text 0 File Cdrdrv.cpp, Line 1288
21:36:40.483 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:41 PM #85 Text 0 File Cdrdrv.cpp, Line 1288
21:36:41.795 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:43 PM #86 Text 0 File Cdrdrv.cpp, Line 1288
21:36:43.030 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:44 PM #87 Text 0 File Cdrdrv.cpp, Line 1288
21:36:44.264 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:45 PM #88 Text 0 File Cdrdrv.cpp, Line 1288
21:36:45.530 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:46 PM #89 Text 0 File Cdrdrv.cpp, Line 1288
21:36:46.717 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:48 PM #90 Text 0 File Cdrdrv.cpp, Line 1288
21:36:48.217 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:49 PM #91 Text 0 File Cdrdrv.cpp, Line 1288
21:36:49.545 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:50 PM #92 Text 0 File Cdrdrv.cpp, Line 1288
21:36:50.874 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:52 PM #93 Text 0 File Cdrdrv.cpp, Line 1288
21:36:52.170 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:53 PM #94 Text 0 File Cdrdrv.cpp, Line 1288
21:36:53.577 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:54 PM #95 Text 0 File Cdrdrv.cpp, Line 1288
21:36:54.874 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:56 PM #96 Text 0 File Cdrdrv.cpp, Line 1288
21:36:56.264 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:57 PM #97 Text 0 File Cdrdrv.cpp, Line 1288
21:36:57.639 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:36:59 PM #98 Text 0 File Cdrdrv.cpp, Line 1288
21:36:59.030 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:00 PM #99 Text 0 File Cdrdrv.cpp, Line 1288
21:37:00.405 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:01 PM #100 Text 0 File Cdrdrv.cpp, Line 1288
21:37:01.733 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:03 PM #101 Text 0 File Cdrdrv.cpp, Line 1288
21:37:03.124 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:04 PM #102 Text 0 File Cdrdrv.cpp, Line 1288
21:37:04.624 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:06 PM #103 Text 0 File Cdrdrv.cpp, Line 1288
21:37:06.014 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:07 PM #104 Text 0 File Cdrdrv.cpp, Line 1288
21:37:07.389 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:08 PM #105 Text 0 File Cdrdrv.cpp, Line 1288
21:37:08.733 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:10 PM #106 Text 0 File Cdrdrv.cpp, Line 1288
21:37:10.092 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:11 PM #107 Text 0 File Cdrdrv.cpp, Line 1288
21:37:11.452 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:12 PM #108 Text 0 File Cdrdrv.cpp, Line 1288
21:37:12.827 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:14 PM #109 Text 0 File Cdrdrv.cpp, Line 1288
21:37:14.092 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:15 PM #110 Text 0 File Cdrdrv.cpp, Line 1288
21:37:15.499 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:16 PM #111 Text 0 File Cdrdrv.cpp, Line 1288
21:37:16.905 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:18 PM #112 Text 0 File Cdrdrv.cpp, Line 1288
21:37:18.233 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:19 PM #113 Text 0 File Cdrdrv.cpp, Line 1288
21:37:19.545 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:21 PM #114 Text 0 File Cdrdrv.cpp, Line 1288
21:37:21.030 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:22 PM #115 Text 0 File Cdrdrv.cpp, Line 1288
21:37:22.342 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:23 PM #116 Text 0 File Cdrdrv.cpp, Line 1288
21:37:23.733 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:25 PM #117 Text 0 File Cdrdrv.cpp, Line 1288
21:37:25.155 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:26 PM #118 Text 0 File Cdrdrv.cpp, Line 1288
21:37:26.530 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:27 PM #119 Text 0 File Cdrdrv.cpp, Line 1288
21:37:27.842 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:29 PM #120 Text 0 File Cdrdrv.cpp, Line 1288
21:37:29.217 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:30 PM #121 Text 0 File Cdrdrv.cpp, Line 1288
21:37:30.639 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:32 PM #122 Text 0 File Cdrdrv.cpp, Line 1288
21:37:32.014 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:33 PM #123 Text 0 File Cdrdrv.cpp, Line 1288
21:37:33.374 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:37:34 PM #124 Text 0 File Cdrdrv.cpp, Line 1288
21:37:34.749 - PIONEER DVD-RW DVR-106D\H1 T0 : Queue again later

9:58:22 PM #125 TRANSFER -25 File Reader.cpp, Line 382
Error reading data

9:58:22 PM #126 Text 0 File Reader.cpp, Line 385
Exception value: -1

9:58:22 PM #127 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:58:22 PM #128 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 800671

9:58:26 PM #129 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

9:58:26 PM #130 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:58:26 PM #131 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/8/2004 8:48:52 AM (Prassi/Veritas driver for win 2K)

 

ok i enabled the DMA on both of my drives. Going to try and burn another DVD and see if this one works.

 

ARGGGGG! i got the error again. DMA is enabled on both drives. This really sucks. i really hope someone can help me.

 

Ok i changed my target size to what you mentioned above in DVD shrink. I also checked my media. It seems to be fine. My computer reconizes it as DVD- DISC. Now how do i update the firmware you were talking about???