Am using version Nero 7 Ultra edition. When I am burning a disk, it works the 1st time, then although no error messages appear, when I burn it for a 2nd time, it says that Nero has burned it ok, there is definitely something burnt in the disk, but the disk is not recognised??!! I have tried: 1. re-installing Nero 2. Different makes of disk I am currently wasting loads of disk where I think it has burned, but disk not recognised. Any ideas?
I understand that all versions of Nero 7.x.x.x are full of bugs [bold]except[/bold] for version 7.0.8.2. If you are running any other version, that may be your problem. Get the Clean Tool for Nero 7 from here: http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html Get Nero 7.0.8.2 here: http://www.filehippo.com/download_nero_7_premium/?845 Make sure that you have your serial number before you uninstall your current version. Good Luck!
[/bold] Yes, you really should run the clean tool whenever you uninstall/reinstall Nero. It will clean up any trash left behind. If you'll post a log of your failed burn, perhaps we can give you more focused assistance.
It seems from this statement you are "Sharing" your copy of Nero which I believe is illegal. If you want to use a legitimate serial number you will have to purchase one from Nero
If you wish to post a Nero log file, from here Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx we can take a look for you.
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 123MB (126644kB) Memory in use : 75 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.6.2006 Burn DVD Image 12:04:42 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 12:04:42 #2 Text 0 File Reader.cpp, Line 124 Reader running 12:04:42 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 12:04:42 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 12:04:43 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 899984 (199:59.59, 1757MB) 12:04:43 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 12:04:43 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 12:04:43 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:04:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 899985 (899985) = #899985/199:59.60 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 12:04:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 12:04:43 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:04:43 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:04:43 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 12:04:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:04:43 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:04:43 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03f66600: Len x2 12:04:43 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 12:16:37 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 12:16:37 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:17:01 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 123MB (126492kB) Memory in use : 75 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.6.2006 Burn DVD Image 12:46:37 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 12:46:37 #2 Text 0 File Reader.cpp, Line 124 Reader running 12:46:37 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 12:46:37 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 12:46:37 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 899984 (199:59.59, 1757MB) 12:46:37 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 12:46:37 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 12:46:37 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:46:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 899985 (899985) = #899985/199:59.60 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 12:46:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 12:46:37 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:46:37 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:46:37 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 12:46:37 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:46:37 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:46:37 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03f75400: Len x2 12:46:37 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 12:58:32 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 12:58:32 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:59:11 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 120MB (123312kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.6.2006 Burn DVD Image 13:16:25 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 13:16:25 #2 Text 0 File Reader.cpp, Line 124 Reader running 13:16:25 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 13:16:25 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 13:16:25 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 899984 (199:59.59, 1757MB) 13:16:25 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 13:16:25 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 13:16:25 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:16:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 899985 (899985) = #899985/199:59.60 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 13:16:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 13:16:25 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:16:25 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:16:25 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 13:16:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 13:16:25 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 13:16:25 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03f64e00: Len x2 13:16:25 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 13:28:20 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 13:28:21 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 13:28:44 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) 13:30:02 #21 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 899984 (199:59.59, 1757MB) 13:30:02 #22 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 13:30:02 #23 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 13:30:02 #24 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW.) 13:30:02 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 13:30:02 #26 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:30:02 #27 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:30:02 #28 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 13:30:02 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 13:30:02 #30 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 13:30:02 #31 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 13:42:00 #32 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 13:42:00 #33 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 13:42:38 #34 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 115MB (118720kB) Memory in use : 77 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.6.2006 Burn DVD Image 14:07:24 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 14:07:24 #2 Text 0 File Reader.cpp, Line 124 Reader running 14:07:24 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 14:07:24 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 14:07:24 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 899984 (199:59.59, 1757MB) 14:07:24 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 14:07:24 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 14:07:24 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 14:07:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 899985 (899985) = #899985/199:59.60 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 14:07:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 14:07:24 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 14:07:24 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 14:07:24 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 14:07:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 14:07:25 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 14:07:25 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03ef4200: Len x2 14:07:25 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 14:19:20 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 14:19:20 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 14:19:59 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 118MB (121764kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.6.2006 Burn DVD Image 15:45:48 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 15:45:48 #2 Text 0 File Reader.cpp, Line 124 Reader running 15:45:48 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 15:45:48 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 15:45:48 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 899984 (199:59.59, 1757MB) 15:45:48 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 15:45:48 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 15:45:48 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:45:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 899985 (899985) = #899985/199:59.60 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 15:45:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 15:45:48 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:45:48 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:45:48 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 15:45:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 15:45:49 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 15:45:49 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03f5de00: Len x2 15:45:49 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 15:57:47 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 15:57:47 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:58:26 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 158MB (162812kB) Memory in use : 68 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.6.2006 Burn DVD Image 18:43:03 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 18:43:03 #2 Text 0 File Reader.cpp, Line 124 Reader running 18:43:03 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 18:43:03 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 18:43:03 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 899984 (199:59.59, 1757MB) 18:43:03 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 18:43:03 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD-R Disc Manufacturer: RITEKG - 03 Disc Application Code: 64, Disc Physical Code: 193 18:43:03 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:43:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 899985 (899985) = #899985/199:59.60 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 18:43:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 899985 | lead-out | 1 | 0x41 | 0x00 18:43:03 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 18:43:03 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 18:43:03 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2x (2,770 KB/s) 18:43:03 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:43:03 #15 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode for Multisession 18:43:03 #16 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 18:43:03 #17 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:54:44 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks 18:54:44 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18:54:45 #20 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 899983 18:54:49 #21 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 18:56:00 #22 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 145MB (149256kB) Memory in use : 71 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.6.2006 Burn DVD Image 09:37:00 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 09:37:00 #2 Text 0 File Reader.cpp, Line 124 Reader running 09:37:00 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 09:37:00 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 09:37:00 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1813764 (403:03.39, 3542MB) 09:37:00 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 09:37:00 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 09:37:00 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 09:37:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 09:37:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1813765 | lead-out | 1 | 0x41 | 0x00 09:37:00 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 09:37:00 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 09:37:00 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 09:37:01 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 09:37:01 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 09:37:01 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03edfe00: Len x2 09:37:01 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 10:00:36 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks 10:00:36 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:01:19 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 157MB (161180kB) Memory in use : 69 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.6.2006 Burn DVD Image 10:12:28 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 10:12:28 #2 Text 0 File Reader.cpp, Line 124 Reader running 10:12:28 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 10:12:28 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 10:12:28 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1813764 (403:03.39, 3542MB) 10:12:28 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:12:28 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 10:12:28 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:12:28 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 10:12:28 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1813765 | lead-out | 1 | 0x41 | 0x00 10:12:28 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:12:28 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:12:28 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 10:12:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:12:29 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:12:29 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03edfe00: Len x2 10:12:29 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 10:35:52 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks 10:35:52 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:36:37 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 137MB (140300kB) Memory in use : 73 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.6.2006 Burn DVD Image 12:59:56 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 12:59:56 #2 Text 0 File Reader.cpp, Line 124 Reader running 12:59:56 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 12:59:56 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 12:59:56 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1813764 (403:03.39, 3542MB) 12:59:56 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 12:59:57 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 12:59:57 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:59:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 12:59:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1813765 | lead-out | 1 | 0x41 | 0x00 12:59:57 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:59:57 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:59:57 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 12:59:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:59:57 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:59:57 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03f6a200: Len x2 12:59:57 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 13:13:05 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks 13:13:06 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 13:13:51 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-L532A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 55MB (56604kB) Memory in use : 89 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.6.2006 Burn DVD Image 13:31:37 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 13:31:37 #2 Text 0 File Reader.cpp, Line 124 Reader running 13:31:37 #3 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-L532A running 13:31:37 #4 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 13:31:37 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1813764 (403:03.39, 3542MB) 13:31:37 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 13:31:37 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 13:31:37 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:31:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A] -------------------------------------------------------------- 13:31:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1813765 | lead-out | 1 | 0x41 | 0x00 13:31:37 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:31:37 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:31:37 #13 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 13:31:37 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 13:31:37 #15 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 13:31:37 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x03edfe00: Len x2 13:31:37 #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 13:44:49 #18 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks 13:44:49 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 13:45:33 #20 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ======
Nero API version: 7.2.0.3 and 7.2.0.3b These latest versions of Nero are full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here http://www.filehippo.com/download_nero_7_premium/?845 DMA needs to be on, go here for guide to turn on http://forums.afterdawn.com/thread_view.cfm/260038 You have your serial number in each log, edit them out before someone pirates them. All log files checked show successful burn, but this version of Nero is doing some weird things.
Also do you have the latest firmware update for your burner, visit their website and see if one is available. I own 4 Pioneer burners and they seem the best I have had HP Lite-On and Kypemedia and they are the ones I have had problems with the most
