Nero burn failed: Burn process failed at 2.4 (3,324 Kb/s) and then I did nero clean installs and driver checks and reinstalled to latest nero 6. My dvd's are correct media that I have burned on this computer before...I can read the dvd (not copy protected) on this computer with media player but I can not burn a copy?...very frustrating...days fighting the beast. Below is infotool...helpppahhh Nero InfoTool 3.07 Drive Information ------------------ Drive : HL-DT-ST DVD+RW GCA-4040N Type : DVD+R/RW Recorder Firmware Version : C108 Buffer Size : 2 MB Date : ? Serial Number Vendor Specific : Drive Letter : D:\ Location : 1:0 Mechanism : Tray Read Speed : 24 X Write Speed : 16 X Read CD Text : Yes Return C2 Pointers : No Read CD-R : Yes Read CD-RW : Yes Read DVD-ROM : Yes Read DVD-RAM : No Read DVD-R : Yes Read DVD-RW : Yes Read DVD-R DL : No Read DVD+R : Yes Read DVD+RW : Yes Read DVD+R DL : No Read BD-ROM : No Read BD-R : No Read BD-RE : No Read HD DVD-ROM : No Read HD DVD-R : No Read HD DVD-RW : No Read HD-BURN : No Read Digital Audio : Yes Read CD+G : Yes Read VideoCD : Yes Write CD-R : Yes Write CD-RW : Yes Write DVD-R : No Write DVD-RW : No Write DVD-R DL : No Write DVD+R : Yes Write DVD+RW : Yes Write DVD+R DL : No Write DVD-RAM : No Write BD-R : No Write BD-RE : No Write HD DVD-R : No Write HD DVD-RW : No Write HD-BURN-R : No Write HD-BURN-RW : No Buffer Underrun Protection : Yes Mount Rainier : No SolidBurn : No Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96 Region Protection Control : RPC II Region : 1 Changes User : 4 Changes Vendor : 4 Disc Information (D:\) ------------------- Type : - no disc inserted - Interface Information --------------------- Adapter 1 --------- Description : Primary IDE Channel Driver Description : System32\DRIVERS\atapi.sys Company : Microsoft Corporation Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Description : IDE/ATAPI Port Driver Attached Devices Description : Master: IC25N060ATMR04-0 Type : Disk Drive DMA : On Adapter 2 --------- Description : Secondary IDE Channel Driver Description : System32\DRIVERS\atapi.sys Company : Microsoft Corporation Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Description : IDE/ATAPI Port Driver Attached Devices Description : Master: HL-DT-ST DVD+RW GCA-4040N Type : CD-Rom Drive DMA : On Autorun : On Adapter 3 --------- Description : Unknown Adapter Driver Description : System32\Drivers\imagedrv.sys Company : Ahead Software AG Version : 2.29.0.0 built by: WinDDK Description : NERO IMAGEDRIVE SCSI miniport Attached Devices Software Information -------------------- Operating System : Windows XP Professional (5.01.2600 Service Pack 2) Country : United States Language : English ANSI Code Page : 1252 OEM Code Page : 437 DirectX : DirectX 9.0c Description : Nero Burning ROM Version : 6, 6, 1, 4 Company : Ahead Software AG Version Check : Ok Description : Nero StartSmart Version : 2, 1, 0, 5 Company : Ahead Software AG Description : NeroVision Version : 3,1,0,25 Company : Nero AG Description : Nero ShowTime Version : 2, 0, 1, 9 Company : Nero AG Description : Nero Recode 2 Version : 2, 2, 6, 17 Company : Ahead Software AG Description : Cover Designer Version : 2, 3, 1, 3 Company : Nero AG Description : Nero BackItUp Application Version : 1, 2, 0, 61 Company : Ahead Software AG Description : InCD Version : 4, 3, 23, 2 Company : Nero AG Hardware Information -------------------- CPU : 1400 MHz Bus Speed : 133 MHz Motherboard : Dell 0D2465 System : Dell Inspiron 8600 BIOS : Dell A00 Memory : 511 MB Sound : SigmaTel Audio Video : MOBILITY RADEON 9000 Driver Information ------------------ Driver : 61883 Description : 61883 Device Class Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Abiosdsk Description : n/a Version : n/a Company : n/a Driver : abp480n5 Description : AdvanSys SCSI Controller Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : ACPI Description : ACPI Driver for NT Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : ACPIEC Description : ACPI Embedded Controller Driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : adpu160m Description : Adaptec Ultra160 SCSI miniport Version : v3.60a (Lab01_N(johnstra).010529-2218) Company : Microsoft Corporation Driver : aec Description : Microsoft Acoustic Echo Canceller Version : 5.1.2601.2180 Company : Microsoft Corporation Driver : agpCPQ Description : CompatNT AGP Filter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Aha154x Description : Adaptec AHA-154x series SCSI miniport Version : v1.13b (XPClient.010817-1148) Company : Microsoft Corporation Driver : aic78u2 Description : Adaptec Ultra2 SCSI miniport Version : v3.60a (Lab01_N.010510-0033) Company : Microsoft Corporation Driver : aic78xx Description : Adaptec Ultra SCSI miniport Version : v3.60a (Lab01_N.010510-0033) Company : Microsoft Corporation Driver : AliIde Description : ALi mini IDE Driver Version : 1.20 Company : Acer Laboratories Inc. Driver : alim1541 Description : ALi M1541 NT AGP Filter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : amdagp Description : AMD Win2000 AGP Filter Version : 5.00 (xpsp_sp2_rtm.040803-2158) Company : Advanced Micro Devices, Inc. Driver : amsint Description : AMD SCSI/NET Controller Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : ApfiltrService Description : n/a Version : n/a Company : n/a Driver : Arp1394 Description : IP/1394 Arp Client Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : asc Description : AdvanSys SCSI Controller Driver Version : 2.9I-MS (XPClient.010817-1148) Company : Advanced System Products, Inc. Driver : asc3350p Description : AdvanSys SCSI Card Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : asc3550 Description : AdvanSys Ultra-Wide PCI SCSI Driver Version : 3.1E-MS (XPClient.010817-1148) Company : Advanced System Products, Inc. Driver : AsyncMac Description : MS Remote Access serial network driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : atapi Description : IDE/ATAPI Port Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Atdisk Description : n/a Version : n/a Company : n/a Driver : ati2mtag Description : ATI Radeon Miniport Driver Version : 6.14.10.6359 Company : ATI Technologies Inc. Driver : Atmarpc Description : IP/ATM Arp Client Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : audstub Description : AudStub Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : Avc Description : AVC Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Avg7Core Description : AVG Scanning Engine Version : 7,1,0,394 Company : GRISOFT, s.r.o. Driver : Avg7RsW Description : AVG Resident Shield Unload Helper Version : 7,1,0,354 Company : GRISOFT, s.r.o. Driver : Avg7RsXP Description : AVG Resident Anti-Virus Shield Version : 7,1,0,381 Company : GRISOFT, s.r.o. Driver : BCM43XX Description : n/a Version : n/a Company : n/a Driver : bcm4sbxp Description : Broadcom Corporation NDIS 5.1 ethernet driver Version : 3.60.0.0 built by: WinDDK Company : Broadcom Corporation Driver : BCMModem Description : n/a Version : n/a Company : n/a Driver : bvrp_pci Description : n/a Version : n/a Company : n/a Driver : cbidf Description : n/a Version : n/a Company : n/a Driver : cbidf2k Description : CardBus/PCMCIA IDE Miniport Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : CCDECODE Description : WDM Closed Caption VBI Codec Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : cd20xrnt Description : IBM Portable CD-ROM Drive Miniport Version : v3.01 (XPClient.010817-1148) Company : Microsoft Corporation Driver : Cdaudio Description : CD-ROM Audio Filter Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : Cdfs Description : CD-ROM File System Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Cdrom Description : SCSI CD-ROM Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Changer Description : n/a Version : n/a Company : n/a Driver : CmBatt Description : Control Method Battery Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : CmdIde Description : CMD PCI IDE Bus Driver Version : 2.0.7 (XPClient.010817-1148) Company : CMD Technology, Inc. Driver : Compbatt Description : Composite Battery Driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : Cpqarray Description : Compaq Drive Array Controllers SCSI Miniport Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : dac2w2k Description : Mylex Disk Array Controller Driver Version : 6.00-21 (XPClient.010817-1148) Company : Mylex Corporation Driver : dac960nt Description : Mylex Disk Array Controller Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : DCamUSBSQTECH Description : n/a Version : n/a Company : n/a Driver : DELTAFW Description : M-Audio Delta FW Audio Driver (WDM) Version : 5.10.00.5023 Company : Midiman/M-Audio Driver : Disk Description : PnP Disk Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : dmboot Description : NT Disk Manager Startup Driver Version : 2600.2180.503.0 Company : Microsoft Corp., Veritas Software Driver : dmio Description : NT Disk Manager I/O Driver Version : 2600.2180.503.0 Company : Microsoft Corp., Veritas Software Driver : dmload Description : NT Disk Manager Startup Driver Version : 2600.0.503.0 Company : Microsoft Corp., Veritas Software. Driver : DMusic Description : Microsoft Kernel DLS Synthesizer Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : dpti2o Description : DPT SmartRAID miniport Version : 2.09 (Lab01_N.010309-0027) Company : Microsoft Corporation Driver : drmkaud Description : Microsoft Kernel DRM Audio Descrambler Filter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : EL90XBC Description : n/a Version : n/a Company : n/a Driver : Fastfat Description : Fast FAT File System Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Fdc Description : Floppy Disk Controller Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Flpydisk Description : Floppy Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : FltMgr Description : Microsoft Filesystem Filter Manager Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Ftdisk Description : FT Disk Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : Gpc Description : n/a Version : n/a Company : n/a Driver : gv3 Description : Processor Device Driver Version : 5.1.2600.1143 (xpsp2.021108-1929) Company : Microsoft Corporation Driver : HidUsb Description : USB Miniport Driver for Input Devices Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : hpn Description : NetRAID-4M Miniport Driver Version : 5.1.2467.0 (Lab01_N(johnstra).010423-0023) Company : Microsoft Corporation Driver : HTTP Description : HTTP Protocol Stack Version : 5.1.2600.2525 (xpsp_sp2_gdr.040919-1056) Company : Microsoft Corporation Driver : i2omgmt Description : I2O Utility Filter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : i2omp Description : I2O Miniport Driver Version : 1.0.0.6 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : i8042prt Description : i8042 Port Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : i81x Description : n/a Version : n/a Company : n/a Driver : iAimFP0 Description : n/a Version : n/a Company : n/a Driver : iAimFP1 Description : n/a Version : n/a Company : n/a Driver : iAimFP2 Description : n/a Version : n/a Company : n/a Driver : iAimFP3 Description : n/a Version : n/a Company : n/a Driver : iAimFP4 Description : n/a Version : n/a Company : n/a Driver : iAimTV0 Description : n/a Version : n/a Company : n/a Driver : iAimTV1 Description : n/a Version : n/a Company : n/a Driver : iAimTV2 Description : n/a Version : n/a Company : n/a Driver : iAimTV3 Description : n/a Version : n/a Company : n/a Driver : iAimTV4 Description : n/a Version : n/a Company : n/a Driver : imagedrv Description : NERO IMAGEDRIVE SCSI miniport Version : 2.29.0.0 built by: WinDDK Company : Ahead Software AG Driver : imagesrv Description : Nero Image Server Version : 2.29.0.0 built by: WinDDK Company : Ahead Software AG Driver : Imapi Description : IMAPI Kernel Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : InCDfs Description : InCD File System Driver Version : 4, 3, 23, 2 Company : Nero AG Driver : InCDPass Description : Ahead RW Filter Driver Version : 4, 3, 23, 2 Company : Nero AG Driver : incdrm Description : Ahead MRW Filter Driver Version : 4, 3, 23, 2 Company : Nero AG Driver : ini910u Description : INITIO ini910u SCSI miniport Version : 2.17 (XPClient.010817-1148) Company : Microsoft Corporation Driver : IntelIde Description : Intel PCI IDE Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : intelppm Description : Processor Device Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : ip6fw Description : IPv6 Windows Firewall Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : IpFilterDriver Description : n/a Version : n/a Company : n/a Driver : IpInIp Description : IP in IP Encapsulation Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : IpNat Description : IP Network Address Translator Version : 5.1.2600.2524 (xpsp_sp2_gdr.040919-1056) Company : Microsoft Corporation Driver : IPSec Description : IPSec Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : IRENUM Description : Infra-Red Bus Enumerator Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : isapnp Description : PNP ISA Bus Driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : kmixer Description : Kernel Mode Audio Mixer Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : lbrtfdc Description : n/a Version : n/a Company : n/a Driver : Modem Description : Modem Device Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : mouhid Description : HID Mouse Filter Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : mraid35x Description : MegaRAID RAID Controller Driver for Windows Whistler 32 Version : 6.19 (XPClient.010817-1148) Company : American Megatrends Inc. Driver : MRxDAV Description : Windows NT WebDav Minirdr Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : MSKSSRV Description : MS KS Server Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : MSPCLOCK Description : MS Proxy Clock Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : MSPQM Description : MS Proxy Quality Manager Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : mssmbios Description : System Management BIOS Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : MSTEE Description : WDM Tee/Communication Transform Filter Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : NABTSFEC Description : WDM NABTS/FEC VBI Codec Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : NdisIP Description : Microsoft IP Driver Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : NdisTapi Description : NDIS 3.0 connection wrapper driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : Ndisuio Description : NDIS User mode I/O Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : NdisWan Description : MS PPP Framing Driver (Strong Encryption) Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : NIC1394 Description : IEEE1394 Ndis Miniport and Call Manager Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Npfs Description : NPFS Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Ntfs Description : NT File System Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : nv Description : n/a Version : n/a Company : n/a Driver : NwlnkFlt Description : NWLINK2 Traffic Filter Driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : NwlnkFwd Description : NWLINK2 Forwarder Driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : ohci1394 Description : 1394 OpenHCI Port Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : omci Description : OMCI Device Driver Version : 7, 0, 323, 0 Company : Dell Computer Corporation Driver : P3 Description : Processor Device Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Parport Description : Parallel Port Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : PartMgr Description : Partition Manager Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : ParVdm Description : VDM Parallel Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : PCI Description : NT Plug and Play PCI Enumerator Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : PCIDump Description : n/a Version : n/a Company : n/a Driver : PCIIde Description : Generic PCI IDE Bus Driver Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : Pcmcia Description : PCMCIA Bus Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : PDCOMP Description : n/a Version : n/a Company : n/a Driver : PDFRAME Description : n/a Version : n/a Company : n/a Driver : PDRELI Description : n/a Version : n/a Company : n/a Driver : PDRFRAME Description : n/a Version : n/a Company : n/a Driver : perc2 Description : PERC 2 Miniport Driver Version : 5.1.2467.0 (Lab01_N(johnstra).010423-0023) Company : Microsoft Corporation Driver : perc2hib Description : PERC 2 Hibernate Driver Version : 5.1.2467.0 (Lab01_N(johnstra).010423-0023) Company : Microsoft Corporation Driver : pfc Description : Padus(R) ASPI Shell Version : 2, 5, 0, 201 Company : Padus, Inc. Driver : portD Description : n/a Version : n/a Company : n/a Driver : PptpMiniport Description : n/a Version : n/a Company : n/a Driver : Processor Description : n/a Version : n/a Company : n/a Driver : PSched Description : MS QoS Packet Scheduler Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Ptilink Description : Parallel Technologies DirectParallel IO Library Version : 1.10 (XPClient.010817-1148) Company : Parallel Technologies, Inc. Driver : ql1080 Description : Miniport Driver for QLogic ISP PCI Adapters Version : 3.04 Company : QLogic Corporation Driver : Ql10wnt Description : Miniport Driver for QLogic ISP PCI Adapters Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : ql12160 Description : Miniport Driver for QLogic ISP PCI Adapters Version : 7.13.02 (W64) Company : QLogic Corporation Driver : ql1240 Description : QLogic ISP PCI Adapters Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : ql1280 Description : Miniport Driver for QLogic ISP PCI Adapters Version : 7.13.01 (W2K) Company : QLogic Corporation Driver : Rasl2tp Description : RAS L2TP mini-port/call-manager driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : RasPppoe Description : RAS PPPoE mini-port/call-manager driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Raspti Description : PTI DirectParallel(R) mini-port/call-manager driver Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : Rdbss Description : Redirected Drive Buffering SubSystem Driver Version : 5.1.2600.2541 (xpsp_sp2_gdr.040919-1056) Company : Microsoft Corporation Driver : RDPCDD Description : RDP Miniport Version : 5.1.2600.0 (xpclient.010817-1148) Company : Microsoft Corporation Driver : rdpdr Description : Microsoft RDP Device redirector Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : RDPWD Description : RDP Terminal Stack Driver (US/Canada Only, Not for Export) Version : 5.1.2600.2695 (xpsp_sp2_gdr.050609-1528) Company : Microsoft Corporation Driver : redbook Description : Redbook Audio Filter Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Secdrv Description : n/a Version : n/a Company : n/a Driver : serenum Description : Serial Port Enumerator Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Serial Description : Serial Device Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Sfloppy Description : SCSI Floppy Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Simbad Description : n/a Version : n/a Company : n/a Driver : sisagp Description : SiS NT AGP Filter Version : 5.12.01.2010 (xpsp_sp2_rtm.040803-2158) Company : Silicon Integrated Systems Corporation Driver : SLIP Description : Microsoft Slip Deframing Filter Minidriver Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Sparrow Description : Adaptec AIC-6x60 series SCSI miniport Version : v2.0a (ReleaseBinaries.001205-1804) Company : Adaptec, Inc. Driver : splitter Description : Microsoft Kernel Audio Splitter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : sr Description : System Restore Filesystem Filter Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Srv Description : Server driver Version : 5.1.2600.2673 (xpsp_sp2_gdr.050509-1531) Company : Microsoft Corporation Driver : STAC97 Description : SigmaTel Audio Driver (WDM) Version : 5.10.3794 Company : SigmaTel, Inc. Driver : StillCam Description : n/a Version : n/a Company : n/a Driver : streamip Description : Microsoft IP Test Driver Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : swenum Description : Plug and Play Software Device Enumerator Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : swmidi Description : Microsoft GS Wavetable Synthesizer Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : symc810 Description : Symbios Logic Inc. SCSI Miniport Driver Version : 5.1.2409.1 (ReleaseBinaries.001205-1804) Company : Symbios Logic Inc. Driver : symc8xx Description : Symbios 8XX SCSI Miniport Driver Version : 5.1.2409.1 (ReleaseBinaries.001205-1804) Company : LSI Logic Driver : sym_hi Description : Symbios Hi-Perf SCSI Miniport Driver Version : 5.1.2462.0 (Lab01_N.010309-0027) Company : LSI Logic Driver : sym_u3 Description : Symbios Ultra3 SCSI Miniport Driver Version : 5.1.2462.0 (Lab01_N.010309-0027) Company : LSI Logic Driver : sysaudio Description : System Audio WDM Filter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Tcpip Description : TCP/IP Protocol Driver Version : 5.1.2600.2827 (xpsp_sp2_gdr.060112-1653) Company : Microsoft Corporation Driver : TDPIPE Description : Named Pipe Transport Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : TDTCP Description : TCP Transport Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : TermDD Description : Terminal Server Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : TosIde Description : Toshiba PCI IDE Controller Version : 5.1.2600.0 (XPClient.010817-1148) Company : Microsoft Corporation Driver : Udfs Description : UDF File System Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : ultra Description : Promise Ultra66 Miniport Driver Version : 1.43 (Build 0603) Company : Promise Technology, Inc. Driver : Update Description : Update Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : usbehci Description : EHCI eUSB Miniport Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : usbhub Description : Default Hub Driver for USB Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : usbprint Description : USB Printer driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : usbscan Description : USB Scanner Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : USBSTOR Description : USB Mass Storage Class Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : usbuhci Description : UHCI USB Miniport Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : VgaSave Description : n/a Version : n/a Company : n/a Driver : viaagp Description : VIA NT AGP Filter Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : ViaIde Description : Generic PCI IDE Bus Driver Version : 1.00.01.01 Company : Microsoft Corporation Driver : VolSnap Description : Volume Shadow Copy Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : Wanarp Description : MS Remote Access and Routing ARP Driver Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : wceusbsh Description : Windows CE USB Serial Host Version : 4.0.4232.0 Company : Microsoft Corporation Driver : WDICA Description : n/a Version : n/a Company : n/a Driver : wdmaud Description : MMSYSTEM Wave/Midi API mapper Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : WSTCODEC Description : WDM WST Codec Driver Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : InCDRec Description : n/a Version : n/a Company : n/a Driver : msvcrt.dll Version : 7.0.2600.2180 (xpsp_sp2_rtm.040803-2158) Driver : msvcirt.dll Version : 7.0.2600.2180 (xpsp_sp2_rtm.040803-2158) Driver : mfc42.dll Version : 6.02.4131.0 Driver : msvcp60.dll Version : 6.02.3104.0 Driver : MSVCP70.DLL Version : 7.00.9466.0 Driver : MSVCR70.DLL Version : 7.00.9466.0 Driver : ole32.dll Version : 5.1.2600.2726 (xpsp_sp2_gdr.050725-1528) Driver : olepro32.dll Version : 5.1.2600.2180 Driver : OLEDLG.DLL Version : 1.0 (XPClient.010817-1148) Driver : advapi32.dll Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Driver : comctl32.dll Version : 5.82 (xpsp_sp2_rtm.040803-2158) Driver : setupapi.dll Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Driver : Aac.dll Version : 2, 5, 9, 991 Driver : aacenc32.dll Version : 3,2,0,30 Driver : Aiff.dll Version : 2, 0, 1, 0 Driver : DefConvertor.dll Version : 2, 0, 2, 0 Driver : Downloaders.dll Version : 2, 0, 1, 0 Driver : lame_enc.dll Version : 3, 93, 1, 0 Driver : midi.dll Version : 2, 0, 1, 0 Driver : mp3PP.dll Version : 1, 0, 0, 9 Driver : mp3PRO.dll Version : 2, 0, 4, 8 Driver : mp3PRO_dmo.dll Version : 2, 0, 0, 16 Driver : mp3PRO_hlp.dll Version : 2, 0, 0, 16 Driver : msa.dll Version : 2, 0, 9, 37 Driver : ogg.dll Version : 1, 0, 0, 6 Driver : TWINVQ2.CDB Version : n/a Driver : video.dll Version : 2, 0, 0, 2 Driver : Vqf.dll Version : 2, 0, 1, 0 Driver : VqfDecLib.dll Version : 2, 0, 0, 6 Driver : VqfEncLib.dll Version : 2, 0, 0, 6 Driver : VqfEncLib1.dll Version : 2, 0, 0, 6 Driver : wav.dll Version : 2, 0, 2, 0 Driver : aacplus.dll Version : 3,2,0,30 Driver : dvddisc.dll Version : 3,2,0,30 Driver : em2v.dll Version : 3, 2, 0, 30 Driver : NDParser.ax Version : 3,2,0,30 Driver : ndvddisc.dll Version : 3,2,0,30 Driver : NeAcEnc.dll Version : 3,2,0,30 Driver : NeAMR.dll Version : 3,2,0,30 Driver : NeAudCD.ax Version : 3,2,0,30 Driver : NeAudio.ax Version : 3, 2, 0, 30 Driver : NeAudioConv.ax Version : 3, 2, 0, 30 Driver : NeCapture.ax Version : 3, 2, 0, 30 Driver : NeDVD.ax Version : 3, 2, 0, 30 Driver : NeDVSplitter.ax Version : 3,2,0,30 Driver : NeEm2a.dll Version : 3,2,0,30 Driver : NeFileSourceAsync.ax Version : 3,2,0,30 Driver : NeFileSrc.ax Version : 3,2,0,30 Driver : NeFSource.ax Version : 3,2,0,30 Driver : NeNDAud.ax Version : 3, 2, 0, 30 Driver : NeNDGui.dll Version : 3, 2, 0, 30 Driver : NeNDMux.ax Version : 3, 2, 0, 30 Driver : NeNDVid.ax Version : 3, 2, 0, 30 Driver : NePhotoSource.ax Version : 3,2,0,30 Driver : NePSMuxer.ax Version : 3,2,0,30 Driver : NeQTDec.ax Version : 3, 2, 0, 30 Driver : NeRender.ax Version : 3,2,0,30 Driver : NeResize.ax Version : 3, 2, 0, 30 Driver : neroadb.dll Version : 3, 2, 0, 30 Driver : neroapl.dll Version : 3, 2, 0, 30 Driver : NeroFormatConv.ax Version : 3, 2, 0, 30 Driver : NeroVideoProc.ax Version : 3,2,0,30 Driver : NeSceneDetector.ax Version : 3,2,0,30 Driver : NeSplitter.ax Version : 3, 2, 0, 30 Driver : NeVcd.ax Version : 3,2,0,30 Driver : NeVCR.ax Version : 3, 2, 0, 30 Driver : NeVcr.dll Version : 3, 2, 0, 30 Driver : NeVideo.ax Version : 3, 2, 0, 30 Driver : NeVideoAnalyzer.ax Version : 3,2,0,30 Driver : AdvrCntr.dll Version : 1,3,6, 2317 Driver : apreg.dll Version : 2, 0, 0, 7 Driver : DriveLocker.dll Version : 1, 0, 0, 17 Driver : MFC71.dll Version : 7.10.3077.0 Driver : msvcp71.dll Version : 7.10.3077.0 Driver : msvcr71.dll Version : 7.10.3052.4 Driver : MultiChannel.dll Version : 3,2,0,30 Driver : NeroCBUI.dll Version : 1, 6, 0, 2 Driver : NeroDigitalExt.dll Version : 1.1.1.1 Driver : NeroIPP.dll Version : 3,2,0,30 Driver : NeroMediaCon.dll Version : 3, 2, 0, 30 Driver : specialoffer.exe Version : 1, 0, 0, 3 Lower Filters ------------- Upper Filters ------------- Driver : InCDPass Description : Ahead RW Filter Driver Version : 4, 3, 23, 2 Company : Nero AG Driver : incdrm Description : Ahead MRW Filter Driver Version : 4, 3, 23, 2 Company : Nero AG Video Codecs ------------ Cinepak Codec by Radius : 1.10.0.11 Intel 4|2|0 Video V2.50 : 5.1.2600.2180 Intel Indeo(R) Video R3.2 Intel Indeo(R) Video R3.2 Intel IYUV codec : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Microsoft RLE : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Microsoft Video 1 : 5.1.2600.0 (xpclient.010817-1148) Microsoft YUV : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Microsoft YUV : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Toshiba YUV Codec : 5.1.2600.0 (XPClient.010817-1148) Microsoft YUV : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158) Microsoft H.263 Video Codec : 5.1.2600.2180 Microsoft H.261 Video Codec : 5.1.2600.2180 Intel Indeo® Video 4.5 : 4.51.16.03 Indeo® video 5.10 : R.5.10.15.2.55 DivX® 5.2.1 Codec : 5.2.1.1328 XviD MPEG-4 Codec : n/a 3ivx D4 4.5.1 Pro Video Codec : 4, 5, 1, 30 Huffyuv v2.1.1 - CCESP Patch v0.2.5 : 2.1.1 - CCESP Patch v0.2.5 Microsoft Windows Media Video 9 : 9.0.1.0369 VP60® Simple Profile : 6,4,2,0 VP61® Advanced Profile : 6,4,2,0 VP62® Heightened Sharpness Profile : 6,4,2,0 VP31n Compressor : 3, 2, 6, 1 DT Microsoft MPEG-4 Video Codec V1 : 4.1.00.3927 Microsoft MPEG-4 Video Codec V2 : 4.1.00.3927 Microsoft MPEG-4 Video Codec V3 : 4.1.00.3927 Audio Codecs ------------ Microsoft IMA ADPCM CODEC : 4.00.0.0 Microsoft ADPCM CODEC : 4.00.0.0 Microsoft CCITT G.711 A-Law and u-Law CODEC : 4.00.0.0 Microsoft GSM 6.10 Audio CODEC : 4.00.0.0 DSP Group TrueSpeech(TM) Software CODEC : 1.00.0.0 Microsoft G.723.1 CODEC : 1.02.0.1 Windows Media Audio : 4.02.0.0 Sipro Lab Telecom ACELP.net audio codec : 3.02.0.0 Fraunhofer IIS MPEG Layer-3 Codec (decode only) : 1.09.1.145 Indeo® audio software : 2.05.0.53 LAME MP3 Codec v0.9.0 - 3.96 (stable) : 4.00.0.0 AC-3 ACM Decompressor : 0.08.0.0 Microsoft PCM Converter : 5.00.0.0 ASPI Information ---------------- System ASPI : ASPI is not installed Nero ASPI : ASPI is installed and working properly WNASPI32.DLL : 2.0.1.74 164112 bytes November 02, 2004 Installed OS Patches -------------------- (Q810090) USB Update : Yes (Q329112) Multi-Border DVD with More Than 4 GB of Data Not Readable Past First Border : Yes (Q812415) Problems with Multiple ATA devices : No (Q322359) Intelide.sys Is Not Used on Computers with ICH4 or ICH5 : No (Q320174) IMAPI Update - CDs recorded have missing files or errors : Yes (Q311542) Devices May not power up properly when resuming from standby : Yes (Q327086) Data Added to Removable Media During Hibernation May Be Lost When You Resume Windows XP : Yes (Q308374) Ricoh 1394 Controller May Not Work with Windows XP : Yes (Q314634) Windows XP Does Not Detect Your New USB Device : Yes (Q822603) USB 1.1 and USB 2.0 update : No (Q323507) Your IEEE 1394 or USB CD-ROM or DVD-ROM Drive May Not Be Recognized in Windows XP : No (Q815834) 'Code 28' Error Message and a Yellow Exclamation Mark Next to a USB Device in Device Manager After Your Computer Resumes from Hibernation : No (Q316575) Problems When You Swap a CD-ROM During Hibernation in Windows XP : No (Q811789) Surprise Removal of 1394 Device Can Cause Bluescreen Error : Yes (Q323322) Cannot Use Sony VAIO PCG-C1MRX Internal Camera with Windows Messenger After You Apply Q316397 : No (Q811789) Surprise Removal of 1394 Device Can Cause Bluescreen Error : Yes
Can you post a Nero log file of your failed burn. Logs located here Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
I am not sure if the history will still be there because of my clean install -- which ended the burn fail and now has made nero simply not see my source dvd as a readable dvd. It's very strange but here is what I did get off the history log that was there: Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero Version: 6.6.0.8 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.8 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 237MB (243504kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2006 Copy disc to image 10:06:57 AM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:06:57 AM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 10:07:22 AM #3 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:07:22 AM #4 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 10:07:22 AM #5 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 6:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 6:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 6:08:08 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero Version: 6.6.0.8 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.8 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 238MB (244564kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2006 Copy disc to image 10:09:02 AM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:09:02 AM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 10:09:02 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 6:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 6:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 6:08:08 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero Version: 6.6.0.8 Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.8 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 238MB (243896kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2006 Copy disc to image 10:22:42 AM #1 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:22:42 AM #2 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 10:22:42 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 6:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 6:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 6:08:08 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 251MB (257580kB) Memory in use : 50 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2006 Copy disc to image 11:10:27 AM #1 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:10:27 AM #2 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:10:39 AM #3 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:10:39 AM #4 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:10:39 AM #5 Phase 23 File dlgbrnst.cpp, Line 1685 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 249MB (255484kB) Memory in use : 51 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2006 Copy disc to image 11:30:54 AM #1 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:30:54 AM #2 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:30:54 AM #3 Phase 23 File dlgbrnst.cpp, Line 1685 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 242MB (248472kB) Memory in use : 52 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.6.2006 Copy disc to image 11:47:16 PM #1 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:47:16 PM #2 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:47:56 PM #3 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:47:56 PM #4 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 11:47:56 PM #5 Phase 23 File dlgbrnst.cpp, Line 1685 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Kenneth Hughes 1A2300067135211971519516 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 229MB (235144kB) Memory in use : 55 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.6.2006 Copy disc to image 12:17:13 AM #1 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 12:17:13 AM #2 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 12:17:38 AM #3 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 12:17:38 AM #4 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: CD.) 12:17:38 AM #5 Phase 23 File dlgbrnst.cpp, Line 1685 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Hi windychip 1st let's edit out your serial # - it's in each of the logs you psted and begins w/ 1A23. Don't need someone else getting it! Here's some suggestions for you: Let's take the Nero version down to 6.6.0.18 and uninstall Nero's InCD which can sometimes cause problems. Uninstall Nero and InCD - then run the clean tools for each. Here's some links: Package 1 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 (recode & vision) http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Clean Tools: http://ww2.nero.com/nero6/enu/General_CleanTool.html http://ww2.nero.com/nero6/enu/InCD_CleanTool.html Older drive - if this is a Dell pc update the firmware to C111. http://forum.rpc1.org/dl_firmware.php?download_id=1931 Now the discs your are trying to copy - are they previous backup's you made?
thanks for your help... I uninstalled InCD. I then uninstalled everything Nero on my computer and then I tried to run the general cleaner but it gave me an error message: "Runtime Error! Program: C:/DOCUME~1/KENNET~1/LOCALS~1/Temp/RarSFX0/cleantool.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information" hUH...(pooty quivering lower lip...guivering more...) wahhhhhhhahaahhaha....
oh yea and I did the older drive update to my dell pc that you suggested even though it was a little scary with all the warnings of dire consequences. it seems to run fine playing dvd's. also installed the nero links you had listed for the older version.
Well...it's attempting to burn now which is a step in the right direction but it fails...here's the burn log: Ken 1A... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 221MB (226908kB) Memory in use : 56 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 6:08:32 PM #1 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 6:08:32 PM #2 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc blank or invalid. Need valid original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 6:08:35 PM #3 Text 0 File Reader.cpp, Line 127 Reader running 6:08:35 PM #4 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 6:08:35 PM #5 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 108288 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 6:08:35 PM #6 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 108288 = 108288, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:08:35 PM #7 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:08:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 108287 ( 24:03.62, 211MB) 6:08:35 PM #9 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 6:08:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:08:35 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 108288 (108288) = #108288/24:3.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [Image Recorder] -------------------------------------------------------------- 6:08:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 6:08:35 PM #13 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 6:08:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:09:38 PM #15 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks 6:09:38 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:09:38 PM #17 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 6:09:43 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 6:09:43 PM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVD+RW GCA-4040N running 6:09:43 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Kenneth Hughes\My Documents\TempImage.nrg> 6:09:43 PM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:10:05 PM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108287 ( 24:03.62, 211MB) 6:10:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 6:10:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 6:10:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 6:10:05 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 108288 (108288) = #108288/24:3.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 6:10:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 6:10:05 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 6:10:05 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:10:05 PM #13 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 6:10:05 PM #14 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x039A4E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 6:10:05 PM #15 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 6:10:05 PM #16 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 6:10:15 PM #17 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06E20000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 6:10:15 PM #18 CDR -1135 File Writer.cpp, Line 311 Write error 6:10:16 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:10:16 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 6:10:16 PM #21 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 6:10:17 PM #22 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 6:10:17 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
One or two steps in the right direction so let's see if we can do a few more. I see the firmware update was a success despite the dire warnings Now the drive recogizes the media and is able to create the image. Doesn't look like your drive can booktype - turn this option off. CD size. Turn off the booktyping and let's see how that goes. No need to recopy the the image - just try and burn it again.
well...i tried to find book type and found it only on nero express. I switched it off auto and to dvd (because there was no off entirely option. It burned one dvd copy and then crashed (I am trying to burn 20). I then tried the nero burning software and could not find any booktype options and it did the same thing...burned one and crashed. I attached a log from that burn - crash sequence. Can I ask you a couple questions oh genie of information? 1) what is the best software to use for burning dvd's? 2) Is my dvd burner an antique? What is the best to use currently for my dell pc laptop? not that you would know these things but I just thought I would ask. A million thanks again and may you get the best from your good karma you are generating helping hapless fools as myself. be well, KH KH 1A... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 276MB (282840kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.6.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 10:34:00 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:34:00 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:34:00 PM #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 108288 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:34:00 PM #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 108288 = 108288, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:34:00 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:34:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 108287 ( 24:03.62, 211MB) 10:34:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:34:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:34:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 108288 (108288) = #108288/24:3.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [Image Recorder] -------------------------------------------------------------- 10:34:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 10:34:00 PM #11 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:34:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:35:04 PM #13 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks 10:35:04 PM #14 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:35:04 PM #15 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:35:09 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:35:09 PM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVD+RW GCA-4040N running 10:35:09 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Kenneth Hughes\Desktop\actreel.nrg> 10:35:09 PM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:35:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108287 ( 24:03.62, 211MB) 10:35:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:35:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:35:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 10:35:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 108288 (108288) = #108288/24:3.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 10:35:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 10:35:35 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:35:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:35:35 PM #13 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 10:35:35 PM #14 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A44E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 10:35:35 PM #15 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 10:35:35 PM #16 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 10:36:53 PM #17 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVD+RW GCA-4040N> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks 10:36:53 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:39:00 PM #19 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:39:00 PM #20 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:39:00 PM #21 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 2.4x (3,324 KB/s) 10:39:29 PM #22 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108287 ( 24:03.62, 211MB) 10:39:29 PM #23 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:39:29 PM #24 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:39:29 PM #25 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 10:39:29 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 10:39:29 PM #27 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:39:29 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:39:29 PM #29 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 10:39:29 PM #30 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A44E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 10:39:29 PM #31 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 10:39:29 PM #32 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 10:39:36 PM #33 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06BF0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 10:39:36 PM #34 CDR -1135 File Writer.cpp, Line 311 Write error 10:39:36 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:39:36 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:39:36 PM #37 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:39:36 PM #38 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:39:36 PM #39 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
By reading your logs, you originally had version 6.6.1.4..which was full of bugs. What you need to do is 1. Uninstall Nero completely 2. Run the clean tool http://ww2.nero.com/nero6/en/Clean_Tools.html 3. I nstall this version http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Unless you do it in this order you will be left with remnants of 6.6.1.4, so you have to get rid of them. I know you have been doing as instructed, but try it this way.
wah. I had done a few uninstalls after reading the posts and went to the lower versions...a couple times. But glad to try it again. So strange it burned a one or two and then crashes with the log below. I also tried dvdshrink and ripped the dvd and played it off the harddrive which seemed to automatically try to burn it and failed...I will put that log on a next message to keep them separate. thanks, k K 1A... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 256MB (262340kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.6.2006 Burn DVD Image 9:57:18 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:57:18 AM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVD+RW GCA-4040N running 9:57:18 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Kenneth Hughes\Desktop\kenact.nrg> 9:57:18 AM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:57:38 AM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108287 ( 24:03.62, 211MB) 9:57:38 AM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 9:57:38 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 9:57:38 AM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 9:57:38 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 108288 (108288) = #108288/24:3.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 9:57:38 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 9:57:38 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 9:57:39 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:57:39 AM #13 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 9:57:39 AM #14 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04BB1400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 9:57:39 AM #15 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 9:57:39 AM #16 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 9:58:55 AM #17 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVD+RW GCA-4040N> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks 9:58:55 AM #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:01:03 AM #19 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:01:03 AM #20 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:01:03 AM #21 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 2.4x (3,324 KB/s) 10:01:30 AM #22 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108287 ( 24:03.62, 211MB) 10:01:30 AM #23 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:01:30 AM #24 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:01:30 AM #25 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 10:01:30 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 10:01:30 AM #27 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:01:30 AM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:01:30 AM #29 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 10:01:30 AM #30 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04BB1400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 10:01:30 AM #31 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 10:01:30 AM #32 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 10:02:54 AM #33 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVD+RW GCA-4040N> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks 10:02:55 AM #34 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:05:05 AM #35 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:05:05 AM #36 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:05:05 AM #37 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 2.4x (3,324 KB/s) 10:05:28 AM #38 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108287 ( 24:03.62, 211MB) 10:05:28 AM #39 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:05:28 AM #40 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:05:28 AM #41 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 10:05:28 AM #42 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108288 | lead-out | 1 | 0x41 | 0x00 10:05:28 AM #43 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 10:05:28 AM #44 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:05:28 AM #45 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 10:05:28 AM #46 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04BB1400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 10:05:28 AM #47 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 10:05:28 AM #48 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 10:05:38 AM #49 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AB0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 10:05:38 AM #50 CDR -1135 File Writer.cpp, Line 311 Write error 10:05:38 AM #51 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:05:38 AM #52 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:05:38 AM #53 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:05:38 AM #54 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:05:38 AM #55 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
dvdshrink burn fail log: 1A… Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 195MB (200504kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.6.2006 NeroAPI 12:27:05 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:27:05 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:27:05 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:27:05 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 12:27:05 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:27:05 PM #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVD+RW GCA-4040N running 12:27:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:27:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:27:05 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:29:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 108527 ( 24:07.02, 211MB) 12:29:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 12:29:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 12:29:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.) 12:29:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 108528 (108528) = #108528/24:7.3 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108528 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 12:29:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 222265344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 108528 | lead-out | 1 | 0x41 | 0x00 12:29:08 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:29:08 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:29:08 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:29:08 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 12:29:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:29:08 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 12:29:08 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04654E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x14 Sense Qual: 0x00 CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x14 0x00 12:29:08 PM #23 Text 0 File DVDR.cpp, Line 5376 Drive: HL-DT-ST DVD+RW GCA-4040N Book Type request [LG]: DVD-ROM Changing the Book Type was finished with error, return code -400 12:29:08 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 12:29:18 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06040000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 12:29:18 PM #26 CDR -1135 File Writer.cpp, Line 311 Write error 12:29:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:29:18 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:29:18 PM #29 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 12:29:18 PM #30 Phase 129 File APIProgress.cpp, Line 276 Generating DVD borders completed successfully 12:29:18 PM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 12:29:18 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 12:29:18 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi windychip At least your having some success Now for your questions: 1) what is the best software to use for burning dvd's? Nero is good. Another program to burn images w/ is DVD Decrypter. Will also autoburn w/ Shrink and it's Free! 2) Is my dvd burner an antique? What is the best to use currently for my dell pc laptop? Well I said it was older - antique not quite yet The last update on this drive was almost 2 years ago. Plus max burn is 4x and it only supports +R DVD's. The Sony 8x +R's you using are good but it's hit or miss on your drive. it's probably on it's wasy out. Me - yes I would replace it - so much better drives out there now!! Dependiing on your budget a 16x quality drive from (us)$40 (BenQ) - top notch Plextor - $100. In the mean time try & pick up some Verbatim's - max 8x.
Gwendolyn: dvd+ Those are all my burner can handle. Although I wonder if these Binkie: Can you clarify some of those burners you mentioned I didn't get the abbreviations?? I love the ideas on software and the burners. I keep hearing that maybe this burner is dated and I need another. I just hate wasting working equipment because I have not learned something so I will bang away at this problem until I am certain it is not me or some other obvious and easy issue. thanks to both of you...I really am learning a lot...slowly... ciao, K
Actually they're not abbreviations (some typos per usual in my post though BenQ & Plextor are both the names. Another good one LiteOn. All support booktyping. The problem with older burners is if they haven't been updated in awhile they don't handle the newer media well. The firmware is what keeps the drive up to speed on the media & how to write to it. Once your's was updated it picked up the media name and media id. Now it's just hit or miss writing to it. So switch the media - try the verbs. But again look for verbs that burn no faster than 8x - 4x would be preferable but slower media is getting harder to find in some places. Bang away a little more w/ some different media. See what happens. Keep us posted too!! Oh and you're welcome!!
A few more questions on the burners. Because I have a laptop would you think I should get an external? 1394 firewire or USB? Same brands? appreciate your suggestions... oh yea, I realized (us) meant u.s. dollars...duh! thought that was secret tech language for us, as a group of burners, that unite in some mathematical formula to... oh nevermind, I digress.
lol - no secret code For a laptop - same ones - just get an external USB port one. More than likely I would think your laptop has a 2.0 USB hub. edit: spelling
So...I beat on Dell even though their tests on my computer showed that my DVD burner should work, I kept pointing out..."it's not working." They finally decided to send me a new burner however reluctantly. I put it in and had some problems...then restarted and it is magic! It works and it makes me smile. To Dells credit. They sent it in 24 hours and they did send it. The sent me: _NEC DVD+-RW ND-6650A cheers, K
Glad to hear you're finally smiling :0) Dell is usually pretty good (from the little I've seen) about replacing drives. Your now have a drive that will burn to both formats and dual layer too! Just check Dell's site or here (make sure it says for Dell pc) to keep the firmware update: http://forum.rpc1.org/dl_search.php That and good media and you should be good to go! Happy Burning!
