Okay, my system is HP 2bg ram MCE 2005 PC with Nero 6.0.18. I have this disc OEM and DVD Decryptor and Shrink, which I have been successfully using to back up my DVDs for 3 years. I had a problem with Nero vision express 2 not allowing me to create DVDs with my own menus, adding AVIs, so I tried to upgrade to 6.04etc but then had trouble with shrink, so I dialed back, uninstalled Nero (though I can't get the clean-up tool from Nero because of a Nero website issue), reinstalled from disc, and now have Nero vision, but have no DVDShrink burning. I read the stickies, searched the past posts, and am at a loss. I used a nero general clean up tool to uninstall nero. Reinstalled Nero from disc. Rebooted. Uninstalled and reinstalled Shrink so it would be installed post Nero. Do I need to uninstall Shrink, decryptor, and Nero, and install them all one at a time? Would a restore on my PC to an older point (pre-upgrade to newer version 6) help? My burn with nero error log is below, as is the error I get when I tried to use shrink to burn with Decryptor. I've never burned with Decryptor before, so I may need to decrypt the ciscs in a different more first, but for the already decrypt dvds on my hard drive, I am not sure what to do. Basically, here are my error logs. I like burning with dvdshrink and nero, but if there is a way that will work and is similarly easy, or for one tme less that 100$ purchase, I will do that, but I really like Nero/Shrink. Anyway, error logs follow. Any help would be appreciated. 1A2*********************** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero API version: 6.3.1.26 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <HP DVD Writer 640c> Version: ES04 - HA 5 TA 0 - 6.3.1.26 Adapter driver: <atapi> HA 5 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : ST3250823AS atapi Port 2 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 640c atapi Port 5 ID 0 DMA: On CdRomPeripheral : IDE-DVD DROM6216 atapi Port 5 ID 1 DMA: On === CDRom-Device-Map === HP DVD Writer 640c E: CDRom0 IDE-DVD DROM6216 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 17 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.9.2008 NeroAPI 9:29:00 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 9:29:00 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 9:29:00 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 9:29:00 PM #4 Text 0 File Reader.cpp, Line 126 Reader running 9:29:00 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:29:00 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:29:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:29:00 PM #8 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-At-Once, using DVD media 9:29:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 9:29:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 9:29:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: HP DVD Writer 640c, Media type: DVD-R Disc Manufacturer: Áš‚5j Õª)USª¦TM¨šQ5£jGÕ�ª U?ª~Tý¨ûQö£ìGÙ�² d?É~’ý%ûJö”ì)ÙS²§dNÉ�’;%vJí”Ú)´Sh§ÑN£�F;Œví - ª)USª¦TM¨šQ5£jGÕ�ª U?ª~Tý¨ûQö£ìGÙ�² d?É~’ý%ûJö”ì)ÙS²§dNÉ�’;%vJí”Ú)´Sh§ÑN£�F;Œví Disc Application Code: 61, Disc Physical Code: 130 9:29:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:29:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HP DVD Writer 640c ] -------------------------------------------------------------- 9:29:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HP DVD Writer 640c ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286128 | lead-out | 1 | 0x00 | 0x41 9:29:00 PM #15 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 9:29:00 PM #16 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 9:29:00 PM #17 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 9:29:00 PM #18 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 8x (11,080 KB/s) 9:29:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:29:00 PM #20 Text 0 File DVDR.cpp, Line 2011 Recording mode: Sequential Recording Mode 9:29:00 PM #21 Text 0 File Mmc.cpp, Line 20794 Set BUFE: supported -> ON 9:29:01 PM #22 Text 0 File DVDR.cpp, Line 2152 Start write address at LBA 0 DVD high compatibility mode: Yes 9:29:01 PM #23 Text 0 File Cdrdrv.cpp, Line 8228 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:29:01 PM #24 SCSI -1047 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 5, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x30 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x64 0x00 9:29:01 PM #25 CDR -1047 File ThreadedTransferInterface.cpp, Line 1614 Illegal mode for this track 9:29:01 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 9:29:01 PM #27 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 8x (11,080 KB/s) 9:29:01 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 9:29:01 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/21/2008 12:30:06 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/21/2008 12:30:04 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) DVD Shrink burn with Decryptor I/O Error: Device [5:0:0] HP DVD Writer 640c Es04 (E (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 53 00 00 00 00 00 22E1 2A 00 Interpretation: Reserve Track - Sectors: 2,285,866 Sense Area: 70 00 05 00 00 00 00 12 00 00 00 00 64 00 00 00 00 00 00 01 02 03 04 05 Interpretation: Illegal Mode for this Track. Thanks, any help would be much appreciated. I have tried to do my homework and fix this on my own with past thread help, but I've hit a wall. Rachel
What brand media are you using? Your drive isn't recognizing them. I would try a different brand, preferrably Verbatim or Taiyo Yuden. If that gives you know joy your drive may be borked and needs replacing...it is getting a little old.
Sounded to me like the website may have been down, not a problem with him accessing the site. http://www.nero.com/eng/downloads-cleantools.html Works fine for me...but this may be another issue all together.
This is a Roxio driver, and you should remove using the Roxio Zap tool (available @ Softpedia). How'd ya miss that Loco? Anyway, the version of Nero you're using is less-than stable, so I'd recommend reverting as close as possible to 6.0.18..
