I know people usually post about about DVD problems but I have one with nero involving trying to make a simple DVD Video. Nothing fancy (or illegal) just some clips that I have collected from the past few months. Yes I have a older version of Nero so you know, like 6.1.0.0 or something. Anyways heres the log of the error: [00:35:39] NeroVision Set Preview Channel [00:35:39] MMTools adding cached c:\Documents and Settings\My\Desktop\2006 Display.wmv video/0 [00:35:39] MMTools unable to use cache: 0x80040216 - [00:35:39] MMTools adding c:\Documents and Settings\My\Desktop\2006 Display.wmv video/0 [00:35:40] MMTools adding cached c:\Documents and Settings\My\Desktop\2006 Display.wmv audio/0 [00:35:40] MMTools unable to use cache: 0x80040216 - [00:35:40] MMTools adding c:\Documents and Settings\My\Desktop\2006 Display.wmv audio/0 [00:35:41] DVDEngine ...New VOB 1 [00:35:41] DVDEngine ..>VOB: VOBN=1, VOB_IDN=1, SA=0 [00:35:41] DVDEngine ...New CELL 1 [00:35:41] DVDEngine ....>Cell: C_IDN=1 [00:39:41] NeroAPI Writing file to disc failed [00:39:41] DVDEngine _BAOFile::Write(): NeroBAOWriteToFile() returned 3 [00:39:42] DVDEngine 1A23-0809-9030-2209-3193-8745 [00:39:42] DVDEngine Windows XP 5.1 [00:39:42] DVDEngine IA32 [00:39:42] DVDEngine WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/19/2004 11:41:48 AM [00:39:42] DVDEngine ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:35:34 PM [00:39:42] DVDEngine Nero API version: 6.6.0.7 [00:39:42] DVDEngine Using interface version: 6.6.0.2 [00:39:42] DVDEngine Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ [00:39:42] DVDEngine Application: ahead\NeroVision [00:39:42] DVDEngine Recorder: <PLEXTOR DVDR PX-708A> Version: 1.11 - HA 2 TA 1 - 6.6.0.7 [00:39:42] DVDEngine Adapter driver: <atapi> HA 2 [00:39:42] DVDEngine Drive buffer : 2048kB [00:39:42] DVDEngine Bus Type : default (0) -> ATAPI, detected: ATAPI [00:39:42] DVDEngine === Scsi-Device-Map === [00:39:42] DVDEngine DiskPeripheral : WDC WD2500JB-00FUA0 15.0 Pnp680 Port 0 ID 0 DMA: Off [00:39:42] DVDEngine DiskPeripheral : MAXTOR 6L080J4 atapi Port 1 ID 0 DMA: On [00:39:42] DVDEngine CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 2 ID 0 DMA: On [00:39:42] DVDEngine CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 2 ID 1 DMA: On [00:39:42] DVDEngine === CDRom-Device-Map === [00:39:42] DVDEngine HL-DT-ST DVD-ROM GDR8161 E: CDRom0 [00:39:42] DVDEngine PLEXTOR DVDR PX-708A F: CDRom1 [00:39:42] DVDEngine ======================= [00:39:42] DVDEngine AutoRun : 1 [00:39:42] DVDEngine Excluded drive IDs: [00:39:42] DVDEngine WriteBufferSize: 83886080 (0) Byte [00:39:42] DVDEngine ShowDrvBufStat : 0 [00:39:42] DVDEngine BUFE : 0 [00:39:42] DVDEngine Physical memory : 1023MB (1047856kB) [00:39:42] DVDEngine Free physical memory: 444MB (454692kB) [00:39:42] DVDEngine Memory in use : 56 % [00:39:42] DVDEngine Uncached PFiles: 0x0 [00:39:42] DVDEngine Use Inquiry : 1 [00:39:42] DVDEngine Global Bus Type: default (0) [00:39:42] DVDEngine Check supported media : Disabled (0) [00:39:42] DVDEngine 23.12.2006 [00:39:42] DVDEngine NeroAPI [00:39:42] DVDEngine 12:33:54 AM #1 Text 0 File DlgWaitCD.cpp, Line 258 [00:39:42] DVDEngine Last possible write address on media: 2298495 (510:46.45, 4489MB) [00:39:42] DVDEngine Last address to be written: -1 ( 0:00.-1, 0MB) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:54 AM #2 Text 0 File DlgWaitCD.cpp, Line 270 [00:39:42] DVDEngine Write in overburning mode: NO (enabled: CD) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:54 AM #3 Text 0 File DlgWaitCD.cpp, Line 2311 [00:39:42] DVDEngine Recorder: PLEXTOR DVDR PX-708A, Media type: DVD-R [00:39:42] DVDEngine Disc Manufacturer: RITEKF - 1 [00:39:42] DVDEngine Disc Application Code: 64, Disc Physical Code: 193 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:54 AM #4 Text 0 File DlgWaitCD.cpp, Line 432 [00:39:42] DVDEngine >>> Protocol of DlgWaitCD activities: <<< [00:39:42] DVDEngine ========================================= [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #5 Text 0 File DVDR.cpp, Line 2334 [00:39:42] DVDEngine Recording mode: Sequential Recording Mode for Multisession [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #6 Text 0 File Mmc.cpp, Line 21156 [00:39:42] DVDEngine Set BUFE: BURN-Proof -> ON [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #7 Text 0 File DVDR.cpp, Line 2475 [00:39:42] DVDEngine Start write address at LBA 0 [00:39:42] DVDEngine DVD high compatibility mode: No [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #8 Text 0 File Cdrdrv.cpp, Line 8363 [00:39:42] DVDEngine ---- DVD Structure: Physical Format Information (00h) ---- [00:39:42] DVDEngine Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 [00:39:42] DVDEngine Book Type: DVD-R (2), Part Version: 5 [00:39:42] DVDEngine Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) [00:39:42] DVDEngine Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable [00:39:42] DVDEngine Linear Density: 0,267 um/bit, Track Density: 0,74 um/track [00:39:42] DVDEngine Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) [00:39:42] DVDEngine End Physical Sector Number of Data Area: 0 h [00:39:42] DVDEngine End Sector Number in Layer 0: 0 h [00:39:42] DVDEngine Data in Burst Cutting Area (BCA) does not exist [00:39:42] DVDEngine Start sector number of the current Border-Out: 0 h [00:39:42] DVDEngine Start sector number of the next Border-In: 0 h [00:39:42] DVDEngine Media Specific [16..63]: [00:39:42] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ [00:39:42] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ [00:39:42] DVDEngine 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1001 [00:39:42] DVDEngine Estimated filesystem size: 544 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #10 Phase 36 File APIProgress.cpp, Line 276 [00:39:42] DVDEngine Burn process started at 4x (5,540 KB/s) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1682 [00:39:42] DVDEngine Buffering files started [00:39:42] DVDEngine [00:39:42] DVDEngine 12:33:56 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1403 [00:39:42] DVDEngine Buffering VIDEO_TS.VOB [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2558 [00:39:42] DVDEngine Finished buffering file VIDEO_TS.VOB of size 3233792 bytes (1579 sectors) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 [00:39:42] DVDEngine Finished writing file VIDEO_TS.VOB of size 3233792 bytes (1579 sectors) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2638 [00:39:42] DVDEngine Buffering files finished successfully [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 675 [00:39:42] DVDEngine Reserved fragment at 0. Length: 2176 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1865 [00:39:42] DVDEngine Reserved start fragment at 0 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 675 [00:39:42] DVDEngine Reserved fragment at 2176. Length: 32 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:34:07 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 [00:39:42] DVDEngine Writing VTS_01_1.VOB at sector 2208 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:28 AM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 [00:39:42] DVDEngine Finished writing file VTS_01_1.VOB of size 29216768 bytes (14266 sectors) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:28 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 [00:39:42] DVDEngine Writing VTS_01_0.BUP at sector 16474 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:28 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 [00:39:42] DVDEngine Finished writing file VTS_01_0.BUP of size 14336 bytes (7 sectors) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:31 AM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 [00:39:42] DVDEngine Writing VTS_01_0.IFO at sector 2176 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:31 AM #24 SCSI -1064 File Cdrdrv.cpp, Line 1433 [00:39:42] DVDEngine SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0D9F0200 [00:39:42] DVDEngine Status: 0x04 (0x01, SCSI_ERR) [00:39:42] DVDEngine HA-Status 0x00 (0x00, OK) [00:39:42] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) [00:39:42] DVDEngine Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) [00:39:42] DVDEngine Sense Code: 0x21 [00:39:42] DVDEngine Sense Qual: 0x02 [00:39:42] DVDEngine CDB Data: 0x2A 0x00 0x00 0x00 0x08 0x80 0x00 0x00 0x10 0x00 0x00 0x00 [00:39:42] DVDEngine Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A [00:39:42] DVDEngine 0x00 0x00 0x00 0x00 0x21 0x02 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:35 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2605 [00:39:42] DVDEngine Successfully released fragment at 2176 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:35 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 [00:39:42] DVDEngine Finished writing file VTS_01_0.IFO of size 14336 bytes (7 sectors) [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:39 AM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 650 [00:39:42] DVDEngine Successfully released fragment at 2208 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:39 AM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 675 [00:39:42] DVDEngine Reserved fragment at 16512. Length: 32 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:35:39 AM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 [00:39:42] DVDEngine Writing VTS_02_1.VOB at sector 16544 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:39:41 AM #30 SCSI -1064 File Cdrdrv.cpp, Line 1433 [00:39:42] DVDEngine SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0D9F0200 [00:39:42] DVDEngine Status: 0x04 (0x01, SCSI_ERR) [00:39:42] DVDEngine HA-Status 0x00 (0x00, OK) [00:39:42] DVDEngine TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) [00:39:42] DVDEngine Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) [00:39:42] DVDEngine Sense Code: 0x21 [00:39:42] DVDEngine Sense Qual: 0x02 [00:39:42] DVDEngine CDB Data: 0x2A 0x00 0x00 0x00 0x08 0x80 0x00 0x00 0x10 0x00 0x00 0x00 [00:39:42] DVDEngine Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A [00:39:42] DVDEngine 0x00 0x00 0x00 0x00 0x21 0x02 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:39:41 AM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 2170 [00:39:42] DVDEngine Failed to write 128 sectors at 16544 [00:39:42] DVDEngine [00:39:42] DVDEngine 12:39:41 AM #32 Phase 179 File APIProgress.cpp, Line 276 [00:39:42] DVDEngine Writing file to disc failed [00:39:42] DVDEngine [00:39:42] DVDEngine Existing drivers: [00:39:42] DVDEngine File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 11:41:48 AM [00:39:42] DVDEngine File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) [00:39:42] DVDEngine File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 1/3/2005 10:33:44 AM (InCD4 driver for win NT/2K/XP) [00:39:42] DVDEngine File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 1/3/2005 10:33:24 AM (InCD4 driver for win NT/2K/XP) [00:39:42] DVDEngine File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 1/3/2005 10:33:46 AM (InCD4 driver for win NT/2K/XP) [00:39:42] DVDEngine Registry Keys: [00:39:42] DVDEngine HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [00:39:42] DVDEngine _Xcept (): Signalling Exception: 129 NeroBAOWriteToFile() returned error condition _BAOFile::Write() [00:39:42] DVDEngine ********END: _VOBS - Process VOB [00:39:42] DVDEngine ******END: VTSTT_VOBS#2 - Process Create [00:39:42] DVDEngine ****END: Create - VTSTT_VOBS#2 [00:39:42] DVDEngine **END: _DVDVideo - Create [00:39:42] DVDEngine ################################################################################ ######## [00:39:42] DVDEngine ERROR [00:39:42] DVDEngine cause: 66 (write_fault) [00:39:42] DVDEngine source: _VOBS [00:39:42] DVDEngine description: The system cannot write to the specified device. [00:39:42] DVDEngine ################################################################################ ######## [00:39:42] DVDEngine **BEGIN: IDVDSessionBaseImpl - Clear [00:39:42] DVDEngine **END: IDVDSessionBaseImpl - Clear [00:39:42] DVDEngine END: IDVDVideoSessionImpl - CreateDisc [00:39:43] NeroAPI Burn process failed at 4x (5,540 KB/s) [00:39:44] DVDEngine BEGIN: IDVDSessionBaseImpl - EndDiscAccess [00:39:44] DVDEngine ..Flags=0 [00:39:44] DVDEngine **BEGIN: _MediaAccess::Release () [00:39:44] DVDEngine ****BEGIN: _MediaAccess::~_MediaAccess () [00:39:44] DVDEngine ****END: _MediaAccess::~_MediaAccess () [00:39:44] DVDEngine **END: _MediaAccess::Release () [00:39:44] DVDEngine END: IDVDSessionBaseImpl - EndDiscAccess [00:39:44] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterCallback [00:39:44] DVDEngine ..Session callback unregistered... [00:39:44] DVDEngine END: IDVDSessionBaseImpl - RegisterCallback [00:47:15] GCHW Node removed: Microsoft Kernel Wave Audio Mixer
The likely problem is incd running. You should dump it. Also you should update to 6.6.0.18. That 6.6.0.7 version was not so good.
Heres the links for 6.6.0.18 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe and the InCD clean tool http://www.nero.com/nero6/enu/InCD_CleanTool.html And a link for latest firmware 1.02 http://plextor.jp/download/firmware/px708_112.exe
Not to sound like a dork but whats InCD? I heard it before. Matter of fact I think I got rid of it before.
InCD v4.3.23.2 InCD is an integrated packet writing solution that has the most stability, ease of use, and compatibility, across all Windows operating systems. Packet writing is the method of writing data in small increments (by packets) onto a rewritable media. InCD is made by Ahead Softare and it's the ideal partner for Nero Burning ROM. Automatically launched when Windows is booted, InCD provides flexible drive letter access to the CD-RW, CD-MRW, DVD RW, DVD-RW or DVD MRW drive providing simple drag and drop or direct save options within applications. Files can be saved, renamed and deleted, just as with other rewritable storage mediums such as floppy or hard disk. InCD is fully compliant with the UDF 1.50 standard in legacy mode and UDF 1.02 for MRW. InCD works exclusively with rewriteable medias (CD-RW, CD-MRW, DVD-RW, DVD RW or DVD MRW). Medias which can only be written once cannot be written using InCD. Get rid of it.
Greetings all. Have a problem and I'm hoping one of you can help me. I made the foolish move a few days ago of updating my Nero to the newest 6.6.1.4. From that point on - I've coastered probably 6 DVD's. I've used the brand successfully in the burner before. I've also been able to burn with InstantCopy, but I've always liked Nero better. Can someone good at reviewing these logs please tell me why I'm having such a problem? Oh, and Gwen - I followed your advice - and deinstalled the 6.6.1.4 and backpedaled down to 6.6.1.18 (?) which I've read is far more stable - and will still interact with DVD Shrink. Any help is appreciated. This is the Nero Log I get from Recode: Project type: Copy entire DVD Target size: DVD5 (2282925) 15:39:32 File LangStreamPatcher.cpp, Line 56 Command table patching started... 15:39:32 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 1 patched! 15:39:32 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: HP DVD Writer 200j Number of copies: 1 Write speed: 3324 KB/s Temp folder: C:\Temp (28870221824 bytes free) Direct burning: true Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: false Compress Adaptive: true 15:40:39 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [12644 vobus] 4622.59MB -> 4266.56MB [R 1.00] Video: 3734.87MB, extra: 531.69MB Audio: 3 streams 0. 0. Dolby Digital 5.1-ch English 349.93MB [enabled] 1. 1. Dolby Digital 5.1-ch French 349.93MB [disabled] 2. 2. Dolby Digital 2-ch English 149.97MB [enabled] Subpicture: 2 streams 0. 0. English 7.09MB [enabled] 1. 1. French 6.10MB [disabled] 15:40:39 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 15:40:39 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD+R 15:40:39 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2283092 sectors (2295104) 15:40:40 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2283092 sectors (2184551 required) 15:40:40 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4459.16MB (4266.70MB obtained) 15:40:40 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 15:41:13 File vob_record.cpp, Line 643 DirectBurn offset: VTS_01_1.VOB 112 16:03:41 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4622.59MB -> Expected 4266.56MB -> Output 4266.56MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 12644 Slide encoded = 0 StillImage encoded = 0 Output extra size = 531.69MB Source video size = 3734.87MB Pictures Modified [I 0] [P 0] [B 0] 16:04:22 File dvd_record.cpp, Line 420 DirectBurn offset: VTS_01_0.IFO 48 16:04:30 File burn_dvdfiles.cpp, Line 547 Compile DVD: completed successfuly (4266.70MB) 16:05:55 File NeroRecorder.cpp, Line 848 Burn failed (3) ----- Begin NeroAPI error log ----- ****-****-****-****-****-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SAMSUNG CD-R/RW SW-248F E: CDRom1 HP DVD Writer 200j F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047024kB) Free physical memory: 591MB (605380kB) Memory in use : 42 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.12.2006 NeroAPI 3:40:40 PM #1 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: -1 ( 0:00.-1, 0MB) 3:40:40 PM #2 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 3:40:40 PM #3 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 200j, Media type: DVD+R 3:40:40 PM #4 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:40:40 PM #5 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05806A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:40:40 PM #6 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:40:40 PM #7 Text 0 File DVDR.cpp, Line 6168 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 3:40:40 PM #8 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: DVD-ROM 3:40:40 PM #9 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 3:40:40 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1005 Estimated filesystem size: 544 3:40:40 PM #11 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 3:41:12 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 0. Length: 592 3:41:12 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1869 Reserved start fragment at 0 3:41:13 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 592. Length: 64 3:41:13 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_1.VOB at sector 656 3:46:38 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 3:46:38 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 2241 Added extra file VTS_01_2.VOB 3:46:38 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_2.VOB at sector 524943 3:52:08 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors) 3:52:08 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2241 Added extra file VTS_01_3.VOB 3:52:08 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_3.VOB at sector 1049230 3:57:59 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors) 3:57:59 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2241 Added extra file VTS_01_4.VOB 3:57:59 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_4.VOB at sector 1573517 4:03:27 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors) 4:03:27 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2241 Added extra file VTS_01_5.VOB 4:03:27 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_5.VOB at sector 2097804 4:04:22 PM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_5.VOB of size 178849792 bytes (87329 sectors) 4:04:22 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_0.BUP at sector 2185133 4:04:22 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_0.BUP of size 69632 bytes (34 sectors) 4:04:23 PM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_0.IFO at sector 592 4:04:30 PM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 2609 Successfully released fragment at 592 4:04:30 PM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_0.IFO of size 69632 bytes (34 sectors) 4:04:30 PM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 1407 Buffering VIDEO_TS.IFO 4:04:30 PM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2571 Finished buffering file VIDEO_TS.IFO of size 6144 bytes (3 sectors) 4:04:30 PM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VIDEO_TS.IFO of size 6144 bytes (3 sectors) 4:04:30 PM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 1407 Buffering VIDEO_TS.BUP 4:04:30 PM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2571 Finished buffering file VIDEO_TS.BUP of size 6144 bytes (3 sectors) 4:04:30 PM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VIDEO_TS.BUP of size 6144 bytes (3 sectors) 4:04:30 PM #40 Phase 175 File APIProgress.cpp, Line 276 Finalizing disc started 4:04:30 PM #41 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:04:30 PM #42 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:04:30 PM #43 Text 0 File BurnAtOnceRecorder.cpp, Line 3247 Writing filesystem of size 1114112 at sector 0 4:04:39 PM #44 Text 0 File BurnAtOnceRecorder.cpp, Line 2943 Writing VIDEO_TS.IFO at sector 544 4:04:39 PM #45 Text 0 File BurnAtOnceRecorder.cpp, Line 2971 Writing VIDEO_TS.BUP at sector 560 4:05:47 PM #46 CDR -1039 File SessionUtils.cpp, Line 49 Focus or tracking error 4:05:47 PM #47 Phase 176 File APIProgress.cpp, Line 276 Finalizing the disc failed 4:05:48 PM #48 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 0 4:05:48 PM #49 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 4:05:48 PM #50 Text 0 File DVDR.cpp, Line 6168 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 4:05:53 PM #51 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 8/1/2006 2:48:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 16:05:55 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
DMA needs to on, here how to correct it: http://www.dvdplusvideo.com/dvdguide005.html I don't have time to look over rest of log, having to shut down with hellacious thunder storm approaching.
Good Call!! I'll look at it for you. Notice that everything was working correctly from 3:40:40 up until 4:05:47. 20 minutes and 7 seconds of happy burning until something happened that caused your burner's laser to "loose the groove". 20 minutes at 2.4X, that's getting really close to the outer edge of the blank disc. Also the process that was taking place was the "finalizing" of the DVD: So once this happened Nero detects that an SCSI error has occurred: I see this as a case of a burner going bad. (Unlikely) or a bad spot on your blank (Likely) that caused the burner's laser to loose sight of the prerecorded groove. Some suggestions: Try some different media. Taiyo Yuden, Verbatim or Hitachi Maxell (Made In Japan). Set your target as a HDD location and then burn separately from the Recode process. Do a simulated burn with Nero to test. It still has to focus on the blank so this works OK as a test. Reduce your target size from DVD-5 to 4300 MB to avoid the edge of the disc. And get your DMA enabled.
Thanks for tthe input. The burner is about three years old, (HP 200e, firmware upgraded to 200j - attached through a USB 2.0 port) and has been fine so far. I have been burning successfully on Philips DVD+r, until the recent problems. I burned a movie onto an HP dvd-rw, using Pinnacle Instant Copy just fine. I went to go check on DMA and here is what I found: IDE/ATAPI - Intel 8280 1DB Ultra ATA STorage Controller 24 CB, driver 4.0.1001.0 Dated 7/2/2001 Primary IDE Device: 0 - DT-"Grayed out" auto detect, TM-DMA if available, CTM-Ultra DMA Mode 5 1 - DT- auto detect, TM-DMA if available, CTM-Not Applicable Secondary IDE Device: 0 - DT-"Grayed out" auto detect, TM-DMA if available, CTM-PIO Mode 1 - DT-"Grayed out" auto detect, TM DMA if available, CTM-Ultra DMA Mode 2 It's my understanding that this whole deal will run better if DMA is enabled on everything - but not sure how to change the PIO mode item. Would I have to reinstall the burner drivers?
DMA is not the problem here. Yes you should have it enabled on all IDE drives. Here is the one that needs fixed: On My PC, the Transfer Mode box is a drop-down menu that lets you select DMA or PIO. You can delete the secondary channel IDE controller. Then reboot. Your system will reinstall the controller. If I were you I would first use one of the media brands I listed. Then I would replace the Samsung CD burner with a new DVD burner. That way you could stop burning through a USB cable. Your Phillips is ready for retirement and new burners are so cheap now that there is no reason not to replace them when they start having problems. Wouldn't it be nice to have a spare that you could install and see if that fixes this? This is typical of what to get: Lite-On 20X DVD Burner with LightScribe from Newegg.com http://www.newegg.com/Product/Product.asp?Item=N82E16827106055 For media I like Taiyo-Yuden -Rs but for this burner I would use T-Y 16X +Rs. Try www.supermediastore.com for these.
Thanks. I got the DMA issue straightened out with your help. Everything is now consistent. I'm thinking you're right on swapping out the burners and going internal - the one you linked to looks like an excellent deal as well ! I had been eyeing an HP 840 with Lightscribe, but the Lite-on from NewEgg is about half the price. Hopefully thai gets me back to a fully automated process.
I see you've been in good hands. Thanks fasfrank! We got 6" of rain in a 12 hour period here. Lots of lightning.
Same to you! That lightscribe is interesting. I'm going to get one at some point. The HP looks really good too. It would be cool to do some nice art on the DVDs rather than marking them up with a Sharpie. I do like my T-Y discs and as far as I know, you can only lightscribe on HP media. Hey Garmoon, I don't know what it is, maybe global warming, but this winter has just sucked here in the Pacific Northwest. My power was off for six days. Now I own a new Honda, a 7000 watt generator instead of the motorcycle I was saving for. I was going to get a Ducati 1098... Which I probably still will, just not as soon. Happy New Year! Frank
Actually verbatim makes lightscribe dvds. My LG will do them but the product is monochromal and just not up to snuff, for any lightscribe media. If you do, do them with a B&W image as the contrast will be better! Happy New Year. @fasfrank We know all about generators here. I still haven't bought one because our lights very seldom go out. Even after Katrina and Rita, only without for 5 hours and 2 hours respectively. Back in '92, Andrew was 2 days. If that ever repeats I will buy one. Gets awfully hot at 90 deg & 100% humidity in summer w/o AC.
Hey Guys...Guess who is back ! I picked up the LiteOn 20x from Newegg and was loving life until I encountered this. Anyone have any thoughts? I've burned probably five or six dvd's on the new burner since I got it (and it is much faster and quieter than the HP 200e it replaced) Here is the Nero Log: ********** Nero Recode 2 ********** Version: 2.2.6.17 Tom xxxx-xxxx-xxxx-xxxx-xxxx-xxxx Project type: Copy entire DVD Target size: DVD5 (2282925) 19:32:04 File LangStreamPatcher.cpp, Line 56 Command table patching started... 19:32:04 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: LITE-ON DVDRW LH-20A1H Number of copies: 1 Write speed: 3324 KB/s Temp folder: C:\Temp (22259920896 bytes free) Direct burning: true Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 19:32:12 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [14082 vobus] 5436.55MB -> 4458.68MB [R 0.49] Video: 3113.78MB, extra: 1344.89MB Audio: 1 streams 0. 0. LPCM 2-ch Unspecified 1317.39MB [enabled] Subpicture: 0 streams 19:32:12 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 19:32:13 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD+R 19:32:13 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2283092 sectors (2295104) 19:32:14 File burn_dvdfiles.cpp, Line 684 Compile DVD: begin deep analysis 19:40:46 File burn_dvdfiles.cpp, Line 754 Compile DVD: analysis changed size 4458.84MB -> 4445.86MB 19:40:46 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4458.84MB (4458.84MB obtained) 19:40:46 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2283092 sectors (2282925 required) 19:40:46 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4459.16MB (4459.16MB obtained) 19:40:46 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 19:41:31 File vob_record.cpp, Line 643 DirectBurn offset: VTS_01_1.VOB 112 19:51:36 File NeroRecorder.cpp, Line 641 Burn failed (3) ----- Begin NeroAPI error log ----- xxxx-xxxx-xxxx-xxxx-xxxx-xxxx* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 18e Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL05 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 LITE-ON DVDRW LH-20A1H E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047024kB) Free physical memory: 542MB (555732kB) Memory in use : 46 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.1.2007 NeroAPI 7:32:13 PM #1 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: -1 ( 0:00.-1, 0MB) 7:32:13 PM #2 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 7:32:13 PM #3 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 7:32:13 PM #4 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:32:13 PM #5 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 7:32:13 PM #6 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 7:32:14 PM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1005 Estimated filesystem size: 544 7:32:14 PM #8 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 7:41:30 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 0. Length: 592 7:41:30 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1869 Reserved start fragment at 0 7:41:31 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 592. Length: 64 7:41:31 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_1.VOB at sector 656 7:47:33 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 7:47:33 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2241 Added extra file VTS_01_2.VOB 7:47:33 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_2.VOB at sector 524943 7:51:36 PM #16 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04CFD400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x0D 0x00 0x60 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 7:51:36 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 2113 Failed to write cache to disc at 852064 7:51:36 PM #18 Phase 179 File APIProgress.cpp, Line 276 Writing file to disc failed 7:51:36 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 0 7:51:50 PM #20 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 8/1/2006 2:48:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 19:51:50 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
