I just bought a brand new dw1650 and first dvd i tried was a coaster i'v tried burning about 15 disc now from vertabim to sony to no name brands out of 15 2 worked ..and then i tried with the same disc again , it did not. i bought the dw1650 to replace my old gigabyte which for some reason did the same thing. so i guess it aint the recorder but something with the software. i tried with roxio / alcohol and nero all errors on both writers and differenent discs here is my nero log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2006/05/28 03:35:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2006/05/28 03:35:58 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e Recorder: Version: BCHC - HA 1 TA 0 - 6.6.0.15 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: Version: BCHC - HA 1 TA 0 - 6.6.0.15 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3120026A atapi Port 0 ID 1 DMA: On CdRomPeripheral : BENQ DVD DD DW1650 atapi Port 1 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 viasraid Port 2 ID 0 DMA: Off DiskPeripheral : HDT722525DLA380 V44O viasraid Port 2 ID 2 DMA: Off === CDRom-Device-Map === BENQ DVD DD DW1650 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047280kB) Free physical memory: 571MB (584868kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.5.2006 ISO compilation 04:19:56 PM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 04:19:56 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 04:19:56 PM #3 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1650 running 04:19:56 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 04:19:56 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 04:19:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2144959 (476:39.34, 4189MB) 04:19:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 04:19:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: BENQ DVD DD DW1650, Media type: DVD+R 04:19:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 04:19:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2144960 (2144960) = #2144960/476:39.35 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2144960 blocks [BENQ DVD DD DW1650] -------------------------------------------------------------- 04:19:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [BENQ DVD DD DW1650] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4392878080, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2144960 | lead-out | 1 | 0x41 | 0x00 04:19:57 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 04:19:57 PM #13 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 04:19:57 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 04:19:57 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 04:19:57 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 04:19:57 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A070400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 04:19:57 PM #18 CDR -1207 File DVDR.cpp, Line 4971 Book Type automatically set to: Current recorder setting 04:19:57 PM #19 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 04:32:10 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04720000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x11 0xFE 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 04:32:10 PM #21 CDR -1135 File Writer.cpp, Line 311 Write error 04:32:10 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 04:32:10 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 04:32:44 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2002/07/17 09:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 2005/11/02 09:00:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/03 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) This is driving me insane ! I installed nero wnaspi32.dll I undated to latest firmware tried almost everything even a new IDE(80) cable. disabled AV disabled Virtual Drives no luck. As i said 2 different writers , 15 different discs - 2 sucessfull writes. the writers work fine on my friends computer ! Anyone any idea's ???? I would rilly apreciate it !
Nero is a little behind, update to 6.6.0.18 here: http://my.afterdawn.com/locoeng/blog_entry.cfm/280 My memory is a little foggy, so I'm not sure if a Raid setup can have DMA enabled. Usually DMA needs to be on for all drives. Usually your burner will show up on this line as well as the information listed here. I'm wondering if when you installed the drive it was done correctly. You say you've tried on two different burners, is there another burner on your puter? It's not showing up. This means that your are asking your burner to do something it can't do...see above statement. This means that your drive doesn't like your media, but the brands you listed should be good. Update Nero and see if there is any improvement.
-------------------------------------------------------------------------------- Nero Version: 6.6.0.15 -------------------------------------------------------------------------------- Nero is a little behind, update to 6.6.0.18 here: >> I used to have vero 7.0.0 / 7.0.14 /7.0.2.3 >>they all did the same thing. so i used neroclean and reinstalled >> this version DiskPeripheral : ST3160827AS 3.42 viasraid Port 2 ID 0 DMA: Off DiskPeripheral : HDT722525DLA380 V44O viasraid Port 2 ID 2 DMA: Off My memory is a little foggy, so I'm not sure if a Raid setup can have DMA enabled. Usually DMA needs to be on for all drives. >> these are 2 sata drives. can u turn dma on for sata ? Usually your burner will show up on this line as well as the information listed here. I'm wondering if when you installed the drive it was done correctly. You say you've tried on two different burners, is there another burner on your puter? It's not showing up. >> i removed the old burner to replace it with this one bacuse i >> thought the burner was faulty Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) This means that your are asking your burner to do something it can't do...see above statement. >> i took nero default settings ?? Sense Key: 0x03 (KEY_MEDIUM_ERROR) This means that your drive doesn't like your media, but the brands you listed should be good. >> i have tried about 8 different manufactures disks. Update Nero and see if there is any improvement >> nope no joy .. this is the error i get now 05:12:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 05:12:54 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A180600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 05:12:54 PM #18 CDR -1207 File DVDR.cpp, Line 4971 Book Type automatically set to: Current recorder setting 05:12:54 PM #19 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: Yes 05:13:19 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x046F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x15 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 05:13:19 PM #21 CDR -1135 File Writer.cpp, Line 311 Write error 05:13:19 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 05:13:19 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 05:13:30 PM #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 05:16:34 PM #25 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 05:16:34 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s)
I'm really more concerned with the top of your log, because Nero doesn't appear to be recognizing your burner properly. Have you tried to create an ISO image with DVD Shrink and burn with DVD Decrypter of Imgburn?
I'm trying to burn normal data, 2gb i also tried roxio. and alcohol to burn other iso's and they failed to :-(
Something is blowing your 2 gig file up to 4.1 gigs. Do you still have Roxio installed on your system? It causes major headaches with Nero. I'm still concerned with the way your drive is hooked up, something isn't right there.
sorry that log i posed was on an instance where i was copying 4.1gb i'v tried copying all sorts of stuff and difference sizes. Roxio is uninstalled. after it failed. What could wronge with the way the drive if hooked up ? it's set to master on the jumpers. on the 1st slot on the IDE cable(80) and it is the only device on IDE(1) interface. this is also the second ide cable i'v tried Another interesting thing. It just burnt a disk now , and fails on the next one but the disc it burnt wont read in the burner but reads on my notebook dvdrom ??? wtf is going on !
here is the complete log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2006/05/28 03:35:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2006/05/28 03:35:58 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <BENQ DVD DD DW1650> Version: BCHC - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <BENQ DVD DD DW1650 >Version: BCHC - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3120026A atapi Port 0 ID 1 DMA: On CdRomPeripheral : BENQ DVD DD DW1650 atapi Port 1 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 viasraid Port 2 ID 0 DMA: Off DiskPeripheral : HDT722525DLA380 V44O viasraid Port 2 ID 2 DMA: Off === CDRom-Device-Map === BENQ DVD DD DW1650 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047280kB) Free physical memory: 518MB (530660kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.5.2006 ISO compilation 07:53:35 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 07:53:35 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 07:53:35 PM #3 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1650 running 07:53:35 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 07:53:36 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 07:53:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2142927 (476:12.27, 4185MB) 07:53:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 07:53:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: BENQ DVD DD DW1650, Media type: DVD+R 07:53:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 07:53:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2142928 (2142928) = #2142928/476:12.28 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2142928 blocks [BENQ DVD DD DW1650] -------------------------------------------------------------- 07:53:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [BENQ DVD DD DW1650] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4388716544, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2142928 | lead-out | 1 | 0x41 | 0x00 07:53:36 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 07:53:36 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 07:53:36 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 07:53:36 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 07:53:36 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 07:53:36 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A180600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 07:53:36 PM #18 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: Current recorder setting 07:53:36 PM #19 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 08:13:04 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x046E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x1A 0xAC 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 08:13:04 PM #21 CDR -1135 File Writer.cpp, Line 311 Write error 08:13:04 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 08:13:04 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 08:13:46 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 2002/07/17 09:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 2005/11/02 09:00:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/03 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
