Hi, Im having problem copying a dvd using re encode of nero. The dvd which i am re encoding is a copy it encodes perfectly, but the problem is it burns 50 percent and the disc comes out with a burn error. The message i get is out of memory could it be it is a copy and there are no other files for it to re encode as on the dvd its the main movie only?
Nero will have added a 'start' and 'end' to the image file (ISO) when it encodes so that you should have no blank at the end of the disk like you describe. The error message makes me think that you don't have enough hard drive space to do the full burn. Try encoding the file with Nero as you have done but save it instead of burning it. You can save it as an image file on the hard drive. Then close Nero and any other progs running and try burning with IMGburn. Its free and uses loads less memory than Nero. You may have to delete some stuff off your hard drive if you still have the problems. How much space is free? You'll need 10Gig for Nero sometimes.
Can you paste the Nero log so that we can have a look at it - it may provide some clues as to the problem.
Also 2.8GB is not enough for Nero to recode. It can need up to 10 GB depending on what you are doing. This is prob why its crashing
the space i have on c drive is 21.2 gb. Still dont know what the problem is? In nero re encode it takes mins to encode a dvd, and then its not the main movie its just the adverts before the film? I have never had this problem before
What i want to do is copy a dvd on to a dvdr, the best way and quickest way for me to do this was by using nero encode then burning it using nero. Now it is takeing quite a bit of time, the main movie does not get encoded and sometimes while burning there will be an burn error of some sort.
If you are trying to back-up a regular shop bought DVD then Nero can't do this - there is copyright protection on it. Use DVD fab to remove the protection and then shrink the size with DVD Shrink (both free) - burn onto a single layer disk then with Nero. There is plenty of help for both DVDfab and DVDShrink here http://forums.afterdawn.com/forum_view.cfm/125
These dvds are not copy protected as I have copied these before using the same method. Now when ever i attempt to do something with nero it just freezes and says nero has encountered an error.
uninstall Nero and try a clean install. If the DVD is protection free it should just copy fine - that's if its a single layer disk.
Here is a log of what is happening: 01:18:30 File LangStreamPatcher.cpp, Line 56 Command table patching started... 01:18:30 File LangStreamPatcher.cpp, Line 129 All tables successfully patched! Burn settings: Target: _NEC DVD_RW ND-4551A Number of copies: 1 Write speed: 0 KB/s Temp folder: My Documents\Nero Recode (29160247296 bytes free) Direct burning: true Target media: DVD R/RW, DVD DL, DVD-RAM Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 01:18:37 File burn_dvdfiles.cpp, Line 237 Compile DVD: init VMG Menus Vobs [2 vobus] 0.25MB -> 0.06MB [R 1.00] Video: 0.04MB, extra: 0.02MB Audio: 0 streams Subpicture: 1 streams 0. 0. Unspecified 0.01MB [enabled] VTS_01 Title Vobs [14083 vobus] 3821.12MB -> 3821.12MB [R 1.00] Video: 3586.21MB, extra: 234.91MB Audio: 1 streams 0. 0. MPEG-1 2-ch Unspecified 207.40MB [enabled] Subpicture: 1 streams 0. 0. Unspecified 0.00MB [enabled] 01:18:38 File burn_dvdfiles.cpp, Line 1243 Compile DVD: begin copy 1 01:18:38 File NeroRecorderBase.cpp, Line 510 Writing to disc: DVD+R 01:18:38 File NeroRecorderBase.cpp, Line 524 Free capacity on disc: 2283092 sectors (2295104) 01:19:02 File burn_dvdfiles.cpp, Line 547 Compile DVD: burning 2283092 sectors (1956530 required) 01:19:02 File burn_dvdfiles.cpp, Line 743 Compile DVD: adjust target size to 4459.16MB (3821.35MB obtained) 01:19:02 File burn_dvdfiles.cpp, Line 593 Compiling DVD Volume started 01:19:02 File vob_record.cpp, Line 647 DirectBurn offset: VIDEO_TS.VOB 16 01:19:02 File burn_dvdfiles.cpp, Line 1149 Compile DVD: finished VMG Menus Vobs VMG Menus Vobs: Original 0.25MB -> Expected 0.06MB -> Output 0.06MB Finished error 0.00MB Ratio encoded = 0 Original encoded = 2 Slide encoded = 0 StillImage encoded = 0 Output extra size = 0.02MB Source video size = 0.04MB Pictures Modified [I 0] [P 0] [B 0] 01:19:33 File vob_record.cpp, Line 647 DirectBurn offset: VTS_01_1.VOB 144 01:51:18 File NeroRecorder.cpp, Line 668 Burn failed (3) ----- Begin NeroAPI error log ----- 1K20-58X3-0K95-4014-5038-617A-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero API version: 8.3.2.1 Using interface version: 8.0.1.1 Installed in: C:\Program Files\Nero\Nero8\Nero Burning Rom\ Application: Nero\Nero Recode Internal Version: 8, 3, 2, 1 Recorder: <_NEC DVD_RW ND-4551A> Version: 1-85 - HA 1 TA 0 - 8.3.2.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default === Scsi-Device-Map === CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 0 ID 0 DMA: On CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 0 ID 1 DMA: Off DiskPeripheral : SAMSUNG SP2504C iaStor Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-4551A E: CdRom0 JLMS DVD-ROM XJ-HD166 F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1047724kB) Free physical memory: 281MB (288632kB) Memory in use : 72 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.1.2006 NeroAPI 01:18:38 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 01:18:38 #2 Text 0 File DlgWaitCD.cpp, Line 311 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 0 ( 0:00.00, 0MB) 01:18:38 #3 Text 0 File DlgWaitCD.cpp, Line 323 Write in overburning mode: NO 01:18:38 #4 Text 0 File DlgWaitCD.cpp, Line 2932 Recorder: _NEC DVD_RW ND-4551A, Media type: DVD+R 01:18:38 #5 Text 0 File DlgWaitCD.cpp, Line 497 >>> Protocol of DlgWaitCD activities: <<< ========================================= 01:18:58 #6 Text 0 File SCSIPTICommands.cpp, Line 264 Error on LockVolume: Access is denied. 01:18:58 #7 Text 0 File SCSIPTICommands.cpp, Line 314 SPTI - Error 5 on DismountVolue: Access is denied. 01:19:02 #8 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 01:19:02 #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1028 Estimated filesystem size: 544 01:19:02 #10 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 4x (5,540 KB/s) 01:19:02 #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1727 Buffering files started 01:19:02 #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1433 Buffering VIDEO_TS.VOB 01:19:02 #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2632 Finished buffering file VIDEO_TS.VOB of size 63488 bytes (31 sectors) 01:19:02 #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2699 Finished writing file VIDEO_TS.VOB of size 63488 bytes (31 sectors) 01:19:02 #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2712 Buffering files finished successfully 01:19:03 #16 CDR -1205 File BurnAtOnceRecorder.cpp, Line 1889 Burning Layer 1 01:19:04 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 196 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x0b5c1440: Len x804 01:19:04 #18 Text 0 File DVDR.cpp, Line 7494 Drive: _NEC DVD_RW ND-4551A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 01:19:04 #19 Text 0 File DVDR.cpp, Line 6901 Drive: _NEC DVD_RW ND-4551A Book Type request [NEC]: DVD-ROM Changing the Book Type was finished successfully, return code 0 01:19:04 #20 CDR -1207 File DVDR.cpp, Line 6605 Book Type automatically set to: DVD-ROM 01:19:04 #21 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 01:19:32 #22 Text 0 File BurnAtOnceRecorder.cpp, Line 689 Reserved fragment at 0. Length: 624 01:19:32 #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1916 Reserved start fragment at 0 01:19:33 #24 Text 0 File BurnAtOnceRecorder.cpp, Line 689 Reserved fragment at 624. Length: 64 01:19:33 #25 Text 0 File BurnAtOnceRecorder.cpp, Line 1427 Writing VTS_01_1.VOB at sector 688 01:28:22 #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2699 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 01:28:22 #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2310 Added extra file VTS_01_2.VOB 01:28:22 #28 Text 0 File BurnAtOnceRecorder.cpp, Line 1427 Writing VTS_01_2.VOB at sector 524975 01:36:47 #29 Text 0 File BurnAtOnceRecorder.cpp, Line 2699 Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors) 01:36:47 #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2310 Added extra file VTS_01_3.VOB 01:36:47 #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1427 Writing VTS_01_3.VOB at sector 1049262 01:51:18 #32 SPTI -1114 File SCSIPassThrough.cpp, Line 196 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114) CDB Data: 0x2A 00 00 14 64 D0 00 00 10 00 00 00 Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 Buffer x0b440040: Len x8000 0x00 00 01 BA 44 25 C4 AC C4 1D 01 89 C3 F8 00 00 0x01 E0 07 EC 81 80 05 21 09 73 50 91 E6 AE B0 45 0x69 AE 85 82 23 7D DD 55 B9 D0 9A 54 B7 35 75 4A 01:51:18 #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2181 Failed to write cache to disc at 1336528 01:51:18 #34 Phase 179 File APIProgress.cpp, Line 282 Writing file to disc failed 01:51:22 #35 Text 0 File BurnAtOnceRecorder.cpp, Line 3716 Disc info: Partitions: 0 01:51:22 #36 Text 0 File DVDR.cpp, Line 7494 Drive: _NEC DVD_RW ND-4551A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 01:51:22 #37 Text 0 File DVDR.cpp, Line 6901 Drive: _NEC DVD_RW ND-4551A Book Type request [NEC]: DVD-ROM Changing the Book Type was finished successfully, return code 0 01:51:22 #38 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 01:51:22 #39 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 01:51:22 #40 Text 0 File Cdrdrv.cpp, Line 11420 DriveLocker: UnLockVolume completed 01:51:25 #41 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 4x (5,540 KB/s)
I would suggest that there are a few problems here; 1- Memory in use : 72 % =WAY too high. 2- Free physical memory: 281MB =Way too small 3- Check supported media : Disabled =not sure why this needs to be disabled and maybe causing an error if the media is not suitable 4- KEY_ILLEGAL_REQUEST = suggest that disk and firmware on drive are not compatible. Have you tried updating your firmware or using a DVD-R? Or copy-protection on the disk 5-BurnAtOnceRecorder = this function is going to struggle with so little memory esp in Nero which is a memory hog 6-KEY_UNIT_ATTENTION = drive has reset because it's got really upset with something most likely the combination of errors before. I would suggest (and I'm open to ideas) Copy protection or errors on the disk/files you are transcoding. I would try running the files through DVDFab or similar to check for copy protection and check for scratched/ bad disk Multiple programs and low on memory causing Nero to flake. Close any other progs down and try to free up some memory. Ideally use another prog to burn which doesn't need so much resource. If you want to burn a normal DVD image (to play on DVD player etc) then try Imgburn. It's free and v. good. Old firmware/media compatibility problem. Try updating your firmware and try a DVD-R disk or another better brand of disk. Hope this helps. It could just be one of these issues causing the fail but because they are all popping up on the error log I would suggest that its the combination of factors killing the burn.
