I purchased a DVD writer, on USB, but it doesn't seems to work. It reads CD's and DVD's and burns CD's. When I try to burn a DVD I have either an error "Power on reset or bus device reset occurred" or "invalid media" or it writes aprox. 700MB and gives me an error such "no disk space". I have a laptop with USB 2.0, I tried to burn with several writer softwares but with the same result. Since I bought it I never succeeded to write a DVD yet. Please help!
You did not give a lot of information about your setup. Post the NeroHistory.log so we can see your specifics. Take out your serial number and since it logs all you burns, possibly edit it (using notepad) for earlier tries and leave one or two of the last attempted burns.(If you use Nero 7, the log should be in C:\Program Files\Nero\Nero 7\Core\NeroHistory.log) Until then, maybe state the type of drive you have and whether you have checked to make sure your USB 2.0 drivers are up to date. Also, you might try a different type of media.
HERE IS MY LOG FILE. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 19:35:32 Nero Version: 6.6.0.14 Internal Version: 6, 6, 0, 14d (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 2 TA 0 - 6.6.0.14 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <QSI CDRW/DVD SBW-242>Version: UK01 - HA 1 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23DA-30 atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === QSI CDRW/DVD SBW-242 D: CDRom0 HL-DT-ST DVDRAM GSA-4167B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 223MB (228848kB) Free physical memory: 80MB (82324kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.6.2006 ISO compilation 18:16:42 #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 18:16:42 #2 Text 0 File Reader.cpp, Line 127 Reader running 18:16:42 #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4167B running 18:16:42 #4 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 18:16:42 #5 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 18:16:43 #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2148367 (477:24.67, 4196MB) 18:16:43 #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 18:16:43 #8 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+RW Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 18:16:43 #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:16:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2148368 (2148368) = #2148368/477:24.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148368 blocks [HL-DT-ST DVDRAM GSA-4167B] -------------------------------------------------------------- 18:16:46 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4399857664, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2148368 | lead-out | 1 | 0x41 | 0x00 18:16:47 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 18:16:48 #13 Text 0 File Burncd.cpp, Line 4114 Cache writing successful. 18:16:48 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 18:16:48 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5.540 KB/s) 18:16:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 18:16:48 #17 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: MKM..... Media type ID: A02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9 23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{ 68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h............... 18:16:48 #18 Text 0 File DVDR.cpp, Line 5008 Drive: HL-DT-ST DVDRAM GSA-4167B Book Type request [LG]: DVD-ROM Book Type setting not supported for the loaded disc type 18:16:48 #19 Text 0 File DVDPlusRW.cpp, Line 655 Start write address at LBA 0 DVD high compatibility mode: Yes 18:29:35 #20 SCSI -1114 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03520000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x01 0x17 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x0F 0x29 0x00 18:29:35 #21 CDR -1114 File Writer.cpp, Line 311 Reset occurred 18:29:35 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18:29:35 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 18:29:38 #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.2004 22:59:44 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your Nero is a few versions behind, update from here http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Also behind, update from here http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA4167DL13.exe Should be on, go here for guide to turn on http://forums.afterdawn.com/thread_view.cfm/260038 To successfully burn DVDs you need a minimum of 512meg RAM, suggest you add an aditional 256meg. In the meantime dont multitask and shut down all unnecessary programs including spyware. I dont know these discs, I recommend Verbatim or Sony (made in japan) Turn off this feature. Final error RESET OCCURRED, heres a bit on that
Thank you for the tips, I really appreciate, finally the Nero version 6.6.0.18 works fine, with a small mention: the simulation fails, but the actual burn is ok, so far. The simulation in normal cases is working with DVD's?
[bold]Here is the log.[/bold] IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 19:35:32 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <QSI CDRW/DVD SBW-242>Version: UK01 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23DA-30 atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === QSI CDRW/DVD SBW-242 D: CDRom0 HL-DT-ST DVDRAM GSA-4167B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 223MB (228848kB) Free physical memory: 70MB (72320kB) Memory in use : 68 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.6.2006 ISO compilation 18:35:40 #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 18:35:40 #2 Text 0 File Reader.cpp, Line 127 Reader running 18:35:40 #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4167B running 18:35:40 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 18:35:40 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 18:35:40 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2149391 (477:38.41, 4198MB) 18:35:40 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 18:35:40 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R Disc Manufacturer: MBI 01 - RG40 Disc Application Code: 64, Disc Physical Code: 193 18:35:40 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:35:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2149392 (2149392) = #2149392/477:38.42 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2149392 blocks [HL-DT-ST DVDRAM GSA-4167B] -------------------------------------------------------------- 18:35:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4401954816, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2149392 | lead-out | 1 | 0x41 | 0x00 18:35:44 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 18:35:44 #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 18:35:44 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 18:35:44 #15 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 4x (5.540 KB/s) 18:35:45 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 18:35:45 #17 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode for Multisession 18:35:45 #18 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 18:35:46 #19 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 18:35:46 #20 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:37:51 #21 SCSI -1064 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08F40000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x04 0xFB 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x2A 0x00 0x00 0x0C 0x21 0x02 18:37:51 #22 CDR -1064 File Writer.cpp, Line 311 Invalid block address 18:37:51 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18:37:51 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 18:37:51 #25 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 326623 18:37:51 #26 Phase 133 File dlgbrnst.cpp, Line 1832 Writing short lead-out 18:37:51 #27 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x5B 0x01 0x00 0x0C 0x72 0x04 18:37:51 #28 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error 18:37:51 #29 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 18:37:51 #30 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.2004 22:59:44 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
