Hi, if anyone could provide some pointers... many thanks in advance. I've just brought a LG DVD writer and came with bundled Nero Express 6.6.0.15. I was attempting to clone DVD movie into DVD-R, some titles were successfully burned while other titles were consistently halted with "Reading disc failed" at the source disc toward the final 90+% progress bar. Below is the error log. Any cure? or should i use other s/w? -Log--------------------- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15i (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === QSI CDRW/DVD SBW-242 F: CDRom0 HL-DT-ST DVDRRW GSA-2164D G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523248kB) Free physical memory: 387MB (397224kB) Memory in use : 24 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.1.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 12:08:14 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:08:14 AM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 12:08:15 AM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 12:08:15 AM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:08:15 AM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 12:08:15 AM #6 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2295103 (510:01.28, 4482MB) 12:08:15 AM #7 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 12:08:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 12:08:15 AM #9 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:08:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder] -------------------------------------------------------------- 12:08:16 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295104 | lead-out | 1 | 0x41 | 0x00 12:08:16 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 12:08:16 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:27:24 AM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068D1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x10 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x10 0x00 12:27:25 AM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 12:27:25 AM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1040 12:27:27 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:27:40 AM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed ===== Disc-Copy over image - 2nd step : Burn the image ... 12:08:14 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:08:14 AM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 12:08:15 AM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 12:08:15 AM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:08:15 AM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 12:08:15 AM #6 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2295103 (510:01.28, 4482MB) 12:08:15 AM #7 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 12:08:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 12:08:15 AM #9 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:08:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder] -------------------------------------------------------------- 12:08:16 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295104 | lead-out | 1 | 0x41 | 0x00 12:08:16 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 12:08:16 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:27:24 AM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068D1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x10 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x10 0x00 12:27:25 AM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 12:27:25 AM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1040 12:27:27 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:27:40 AM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Nero 7 will not help here.... - not too bad, 6.6.0.18 is latest 6.x version - it would appear there's no newer firmware for this burner yet... - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - you appear to be trying to copy a single layered discs's-worth of data from a dual layer disc that your burner's firmware is unable to recognise - see previous comment. you need to try different discs, that your burner's firmware can recognise.. - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
1st would like to apologise to 2x posting... realised "nero dicussion" is more appropriate... Thanks creaky for the dissects. - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm == the the HDD DMA is already on, the other CDRW/DVD is not involve in this burning process. hence, may not try now...;< - you appear to be trying to copy a single layered discs's-worth of data from a dual layer disc that your burner's firmware is unable to recognise == Yap, my friend who pass me the disc may have strip from dual layer to single layer. His disc (the source) is perform playing. Does that affect my burner unable to recongnise? strange. Don't know what action to take here. - see previous comment. you need to try different discs, that your burner's firmware can recognise.. == if you meant trying different target disc such as DVD+R or DVD+-RW types? can work on this and let you know if it works...:> - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD == ok, with do this 1st!
you still need to do the DMA stuff though as any drives not in DMA mode will be in 'PIO' mode, and will drag the speed of all other drives down..
I've performed DMA on and uninstallation of InCD, reinstall Nero. However, Burn failed error still persists. should i try this then? "== if you meant trying different target disc such as DVD+R or DVD+-RW types?" OR it is a situation of "== Yap, my friend who pass me the disc may have strip from dual layer to single layer. His disc (the source) is perform playing. Does that affect my burner unable to recongnise? " if yes, what do i do? ---Below the new log-------- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15i (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === QSI CDRW/DVD SBW-242 F: CDRom0 HL-DT-ST DVDRRW GSA-2164D G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523248kB) Free physical memory: 401MB (410728kB) Memory in use : 21 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.1.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 11:00:55 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:00:55 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 11:00:56 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:00:56 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:00:56 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 11:00:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2295103 (510:01.28, 4482MB) 11:00:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 11:00:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 11:00:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:00:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder] -------------------------------------------------------------- 11:00:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295104 | lead-out | 1 | 0x41 | 0x00 11:00:57 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 11:00:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:14:06 PM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068F1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x10 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x10 0x00 11:14:07 PM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 11:14:07 PM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1040 11:14:07 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:14:10 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed ===== Disc-Copy over image - 2nd step : Burn the image ... 11:00:55 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:00:55 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 11:00:56 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:00:56 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:00:56 PM #5 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 11:00:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2295103 (510:01.28, 4482MB) 11:00:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 11:00:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 11:00:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:00:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [Image Recorder] -------------------------------------------------------------- 11:00:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295104 | lead-out | 1 | 0x41 | 0x00 11:00:57 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 11:00:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:14:06 PM #14 SCSI -1040 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x068F1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x10 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x22 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x10 0x00 11:14:07 PM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 11:14:07 PM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1040 11:14:07 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:14:10 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
can still see 2 problems - InCD is still there, also the same discs are being used - your burner can't recognise these discs so it's no wonder it's not working
Hey Creaky: Long time no talk. I use Ner 6.6.0.18 and have no problems so I have been hesitant to upgrade because of all the problems I have been reading above in the new Version 7. Whats your take on it?
hey stranger, how's it going. i've simply no need to ever go 7.x myself as i only do straight dvd burns/data & cd burns so Burning Rom 6.x is more than sufficient for me. i see there are loads of teething problems with 7.x but there always are with new stuff. Alkohol is getting on great with 7.x and he uses stuff like Recode etc.. i would say up to you!
Hi Creaky, > can still see 2 problems - InCD is still there, also the same > discs are being used - your burner can't recognise these discs so > it's no wonder it's not working I thought I've uninstalled InCD with reboot, and then selected installation without InCD. I did these without using Nero's Clean Tools. I simply uninstall program add/remove. Is there such a tool? I've searched here and Nero's website... did not find any. What should I do now?
@whale_ann - just catching up on 3months of replies, did you ever get any further with your burning ?...
