hey wen i go to burn a dvd movie or ps2 game it always say burn progress failed but there was one time where it axullt burnt properly i hav anydvd dvd shrink and dvd dycrypter wat more could i possibly need more ram by any chane i only hav 256mb of ram???? plz help
Can you post a Nero log file? That has the information we need. 256 MB is useable. More is better tho. There are a variety of reasons Nero could fail. Sometimes it's the media, sometimes it's a fault with the program or you might be doing something wrong.
yer how do i do tht and i did read some where tht i will need atleast 512 mb ram does anyone out there burn dvds with 256mb ram ??
ok i found out how to do a log file and i did one but i didn't try copy a dvd then do it i jus said copy dvd then canceled then took a log fileto show ya here it is fred k 1A23-5017-4335-5556-5153-6495 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 2/04/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 255MB (261524kB) Free physical memory: 78MB (80128kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.1.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 7:57:09 PM #1 SCSI -1081 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x53 Sense Qual: 0x02 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x53 0x02 7:57:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 7:57:12 PM #3 Phase 23 File dlgbrnst.cpp, Line 1818 Reading disc aborted ===== Disc-Copy over image - 2nd step : Burn the image ... 7:57:09 PM #1 SCSI -1081 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x53 Sense Qual: 0x02 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x53 0x02 7:57:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 7:57:12 PM #3 Phase 23 File dlgbrnst.cpp, Line 1818 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 2:07:32 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 4:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Nero is supposed to run on less but might not work correctly. The first thing you need to do is to update your Nero. Yours is quite a few versions behind. Also you posted your Nero serial number. You should edit it out. It's the number that starts with 1a23 After you get updated try an actual burn and post the log from that. That way we can see what error you are getting.
dont worry im downlading it afteradawn but when ive installed the new one will i be able to burn properly and will i need new serial or sumthin?
ok i hav ended up gettin nero ultra edition and ive got the serial and its all workin goooood ok i took another log test but do u want me to do alog test wen it comes up with the burn disc fail thing or not cause if i do then tht means there is another disc i hav to watse and i hav read in a few places now tht i need more ram like atleast 512 is there amy one who uses 256mb ram and burns dvds fine??? ok here is the log test thanks for all ur help :}
ok i hav ended up gettin nero ultra edition and ive got the serial and its all workin goooood ok i took another log test but do u want me to do alog test wen it comes up with the burn disc fail thing or not cause if i do then tht means there is another disc i hav to watse and i hav read in a few places now tht i need more ram like atleast 512 is there amy one who uses 256mb ram and burns dvds fine??? ok here is the log test thanks for all ur help :} .. .. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1673S D: CDRom0 AXV CD/DVD-ROM F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261524kB) Free physical memory: 79MB (81588kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.1.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 12:18:48 AM #1 SPTI -1065 File SCSIPassThrough.cpp, Line 323 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04781e00: Len x1008 12:18:48 AM #2 SPTI -1065 File SCSIPassThrough.cpp, Line 323 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04781e00: Len x1008 12:19:03 AM #3 SPTI -1065 File SCSIPassThrough.cpp, Line 323 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04781e00: Len x1008 12:19:51 AM #4 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 12:19:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 12:19:51 AM #6 Phase 23 File dlgbrnst.cpp, Line 1725 Reading disc aborted ===== Disc-Copy over image - 2nd step : Burn the image ... 12:18:48 AM #1 SPTI -1065 File SCSIPassThrough.cpp, Line 323 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04781e00: Len x1008 12:18:48 AM #2 SPTI -1065 File SCSIPassThrough.cpp, Line 323 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04781e00: Len x1008 12:19:03 AM #3 SPTI -1065 File SCSIPassThrough.cpp, Line 323 F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x04781e00: Len x1008 12:19:51 AM #4 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 12:19:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Unknown. Medium required by compilation: DVD.) 12:19:51 AM #6 Phase 23 File dlgbrnst.cpp, Line 1725 Reading disc aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 2:07:32 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thats version is needed updating to 7014b. Its not recognizing whatever you have in the drive. Your burner is several versions behind on firmware. Get newest for it here. http://www.liteonit.com/ODD/WebFW/SOHW-1673S/DR16JS0D.zip
I still don't know what type and brand of media you are using. This can be the cause of the problem. I'll go over your last log and then try to come up with a procedure to test with....... The errors on your log are the result of not having a blank inserted and aborting the program. This does give us a bit of information to work with though. The first thing I see is that firmware for your Lite-on Burner is out of date. Here is rpc1.org's firmware page for this drive: http://forum.rpc1.org/dl_result.php?kaj=1&isces The next thing I see is that DMA is off on your DVD-ROM. This will slow the rip process down but not cause a failed burn. I would correct that as soon as possible though. Here is a guide: http://www.dvdplusvideo.com/dvdguide005.html Here is another guide: http://home.comcast.net/~bbmayo/checking DMA.pdf whompus brought up your new Nero is a bit out of date so you should download the newest version from Nero: http://nero.com/nero7/enu/nero7-up.php Your RAM is minimal. If at all possible get more. Nowdays a typical PC used for video work will have 1 GB of RAM for "happy" ripping and burning. I noticed on a previous computer that an increase in ripping speed occurred when I upgraded from 512 MB to 1 GB. I imagine you will see an improvement as well if you can do an upgrade from 256 MB to 512 MB or more. I doubt your RAM is causing errors though. It is just slowing things down. The programs should still work. Make sure you eliminate as many programs as possible that are running in the background. For example you can disconnect from the internet and turn off your firewall/antivirus programs. Lets go over a test procedure so we can get a good simulated burn. I assume you are familiar enough with Shrink to make a set of video files on your hard drive. We need those to load into Nero to perform the simulation. I just popped Fantastic 4 into my ROM so I will go through each step. Insert movie in DVD-ROM. Open Shrink, select movie. Shrink analyzes. Select Re-author. Drag Title 1 over to the left. Click Compression Settings tab on right. Uncheck all audio except AC3 5.1-ch. Uncheck all Subpicture boxes. Select Backup! Change target to "Hard Disk Folder". Set output to my "Shrink Target" folder on my desktop. Select OK. Encoding begins. Decryption Status: Not Encrypted...I have AnyDVD running in the background. Encoding complete. Time: 8 minutes 44 seconds. Select OK. Close Shrink. That completes making a set of files on the Hard Drive. They are located on my desktop in my Shrink Target folder. The next step is to use Nero to perform a simulated burn. Open Nero Burning ROM. I have a desktop shortcut so I just click the icon. Burning ROM opens. Click the DVD-Video icon on the left. Don't use any other! Click New, bottom left. Browse for the movie files, double click my Shrink Target folder. Double click the Video_ts folder. The files open. Right click any of the files and select "Select All" from the menu. Right click the blue files and select "Copy to Compilation". They are copied to the compilation area on the left. Place a blank DVD in the burner. I give it a few moments to get spun up. I note that my burner is selected at the top. Click the Burn icon at the top. Action: Check the Simulation box. Uncheck the rest. Writing: Change the write speed to 4X.(I'm using 8X for this simulation. I burn at 4X.) Number of copies: 1. Everything else is unchecked. Click the "Simulate" button to start. It starts. When it finishes, a Simulation Completed window opens. Click "Details" and then click "Save Log". Save it to a convenient location. Select OK and Close Nero. That completes the simulation. Nothing was written to the blank disc. It does have to be in the burner for the simulation to work. Here is my simulated burn log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.4 Internal Version: 7, 0, 1, 4 Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 1 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <JLMS XJ-HD166S >Version: DS1E - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 1 DMA: On DiskPeripheral : Promise 2+0 Stripe/RAID01.10 fasttx2k Port 2 ID 0 DMA: Off === CDRom-Device-Map === JLMS XJ-HD166S D: CDRom0 PIONEER DVD-RW DVR-109 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 1 BUFE : 0 Physical memory : 2046MB (2095520kB) Free physical memory: 1352MB (1385332kB) Memory in use : 33 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.1.2006 UDF/ISO compilation 12:46:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 12:46:55 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 12:46:55 PM #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:46:55 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 12:46:55 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 12:46:55 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 12:46:55 PM #7 Text 0 File Writer.cpp, Line 113 Writer E: PIONEER DVD-RW DVR-109 running 12:46:55 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:46:56 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:46:56 PM #10 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 12:46:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2264335 (503:11.10, 4422MB) 12:46:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 12:46:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 12:46:56 PM #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:46:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2264336 (2264336) = #2264336/503:11.11 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264336 blocks [E: PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 12:46:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4637360128, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2264336 | lead-out | 1 | 0x41 | 0x00 12:46:56 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:46:56 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 12:46:56 PM #19 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 12:46:56 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 12:46:56 PM #21 Phase 32 File dlgbrnst.cpp, Line 1725 Simulation started at 8x (11,080 KB/s) 12:47:03 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:47:03 PM #23 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 12:47:03 PM #24 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 12:47:03 PM #25 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 12:47:03 PM #26 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:47:07 PM #27 Text 0 File Cdrdrv.cpp, Line 1197 12:47:07.843 - E: PIONEER DVD-RW DVR-109 : Queue again later 12:54:33 PM #127 Text 0 File WriterStatus.cpp, Line 116 <E: PIONEER DVD-RW DVR-109> start writing Lead-Out at LBA 2264336 (228D10h), length 0 blocks 12:54:33 PM #128 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:54:33 PM #129 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2264335 12:54:42 PM #130 Phase 33 File dlgbrnst.cpp, Line 1725 Simulation completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/27/2004 11:42:34 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) So you should be able to complete a simulated burn and we can see a good log file from you. Let me know if I left anything out or if you have a question. Cheers, Frank
is tht dvd region thing exacly like anydvd cause if it is i hav anydvd and its registed and all??? so do i still need it?? hey frank i hate waiting like everyday to see wat do to next and i hav a few dvds tht ppl want burnt. Do u hav msn or sumthin so i can jus do it all at once if u do hav msn add me my addy is wat_the1800@hotmail.com
ok i got the new newest nero and updated my disc drive and i did the other u told me to do and i took a log test and here it is.Should i b able to burn dvds or not??? thank you for ur help frank . . Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.4 Internal Version: 7, 0, 1, 4 Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1673S D: CDRom0 AXV CD/DVD-ROM F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261524kB) Free physical memory: 85MB (87560kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.1.2006 Burn DVD Image 8:12:00 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 39936KB of Memory 8:12:00 PM #2 Text 0 File Reader.cpp, Line 124 Reader running 8:12:00 PM #3 Text 0 File Writer.cpp, Line 113 Writer D: LITE-ON DVDRW SOHW-1673S running 8:12:00 PM #4 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 8:12:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1624435 (360:59.10, 3172MB) 8:12:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 8:12:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 8:12:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc for simulation. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 8:12:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1624436 (1624436) = #1624436/360:59.11 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1624436 blocks [D: LITE-ON DVDRW SOHW-1673S] -------------------------------------------------------------- 8:12:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3326844928, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1624436 | lead-out | 1 | 0x41 | 0x00 8:12:35 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:12:35 PM #12 Phase 32 File dlgbrnst.cpp, Line 1725 Simulation started at 4x (5,540 KB/s) 8:12:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:12:36 PM #14 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode for Multisession 8:12:36 PM #15 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 8:12:36 PM #16 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 8:12:36 PM #17 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:22:44 PM #18 Text 0 File WriterStatus.cpp, Line 116 <D: LITE-ON DVDRW SOHW-1673S> start writing Lead-Out at LBA 1624436 (18C974h), length 0 blocks 8:22:44 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:22:44 PM #20 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 1624431 8:22:52 PM #21 Phase 133 File dlgbrnst.cpp, Line 1725 Writing short lead-out 8:23:42 PM #22 Phase 33 File dlgbrnst.cpp, Line 1725 Simulation completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 2:07:32 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I caint beleave we mised this. DiskPeripheral shows port 0 id 0 so is on primary as master and is right CdRomPeripheral shows port 1 id 1 so is on secondary but as slave Is there some other ide device on the secondary ide controller as master and not showing up in the log? If not you should change the jumper on the back of the dvd burner to be master or cs.
You will most likely have to remove the drive from the computer to get access to the jumper. Then change the tab from sl, to ma or cs. I suggest ma as it seems to work better that way. The jumper will look like this
Because if it is on the secondary channel as your log points to. With port 1 and id being 1 instead of 0 that suggest it is jumpered as slave. Your log also does not point to anything else being on the secondary port. Therefor it will never work right with the current settings. With it being the only device on the channel it has to be set as ma (master/single drive) or cs (cable select). The slave setting (which most come from factory set as) is to be put on a channel with another device already on it as master.
wel i cant do tht cause i gotta like take the whole computer to pices cause its screwed into this bit i cant get to and does tht mean i wont b able to burn dvds
Well if it is not set right you will keep having problems. I notice you said at one time it burned ok. That seems to mean it may be set to cs but for whatever reason now it is being picked up as port 1 id 1 which means it is picking it up as second drive on secondary controller. Cs seems to only work ok on a regular basis if there are 2 drives set to cs on the same controller.
