Hi, Im having an issue with nero (or maybe my burner). I am trying to backup a disc using nero recode but once the recode is done and it gets to the burning part it freezes (cant shut down my comp i have to manually turn off the power). I figured that i should search around and the site and try and solve the problem myself but i've had no luck so far. Im running a Sony DRU-820A (usb) with nero 6.6.0.18 and unfortunately i checked my log files and they dont seem to be showing up. Im going to try recoding yet another file and see if that one shows up. Thx for your help
Well I tried burning another file by writing to the hard disk and it did that fine. No problems whatsoever, but yet again, once i started the burn it said starting caching of files it completely froze again. I manually turned off my burner after letting it sit there for a good 15 minutes of it doing nothing and nero unfroze. My burner sounded like it was going to do something at first (reving high and whatnot) but then it just stopped reving and sat idle. I did however get the log file and here it is Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <SONY DVD RW DRU-820A> Version: 2.0b - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-RW GCE-8160B >Version: 1.02 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8160B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523568kB) Free physical memory: 250MB (256392kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.3.2008 UDF/ISO compilation 5:31:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 5:31:59 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 5:31:59 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 5:32:00 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 5:32:00 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 5:32:00 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:32:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:32:00 PM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 5:32:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283471 (507:26.21, 4459MB) 5:32:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 5:32:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: SONY DVD RW DRU-820A, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 5:32:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:32:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283472 (2283472) = #2283472/507:26.22 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283472 blocks [SONY DVD RW DRU-820A] -------------------------------------------------------------- 5:32:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD RW DRU-820A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676550656, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283472 | lead-out | 1 | 0x41 | 0x00 5:32:01 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 5:32:01 PM #16 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 5:32:01 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 5:32:01 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 5:32:01 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012B06C Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x01 0xC4 0x08 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x 5:32:01 PM #20 CDR -500 File ThreadedTransferInterface.cpp, Line 1612 SCSI command aborted SONY DVD RW DRU-820A\H2 T0 5:38:14 PM #21 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) 5:38:14 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Again, thanks for any help you can provide.
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 the disc used your system doesnt like it... -------------- bit low on resources, but maybe ok just dont multitask, try encoding to hard drive, then reboot pc and do the burn... Physical memory : 511MB (523568kB) Free physical memory: 250MB (256392kB) Memory in use : 51 % -------------- for cheapo dvdr's your burning very close to outer edge of dvdr... (may get problems on play back even if disc does burn) set output to 4300meg. Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283471 (507:26.21, 4459MB) -------------- did you get that 2.0b firmware from sony? couldnt see a v2 on this site? http://forum.rpc1.org/dl_firmware.php?download_id=2237 -------------- side note: booktype dvd+R to dvd-rom if your burner will allows it
