every time i try to burn a dvd it gives me this: #25 CDR -1106 File Writer.cpp, Line 302 Power calibration error D: Memorex DVD16+/-DL4RWlD2 whats going on?
NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS4 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Memorex DVD16+/-DL4RWlD2>Version: JWS4 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-00JHA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Memorex DVD16+/-DL4RWlD2 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Memorex DVD16+/-DL4RWlD2 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte BUFE : 0 Physical memory : 479MB (490992kB) Free physical memory: 45MB (46188kB) Memory in use : 90 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.7.2006 ISO compilation 11:33:01 AM #1 Text 0 File Isodoc.cpp, Line 6427 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:33:01 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 68608KB of Memory 11:33:01 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 11:33:01 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: Memorex DVD16+/-DL4RWlD2 running 11:33:01 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:33:01 AM #6 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 11:33:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 695567 (154:34.17, 1358MB) 11:33:02 AM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:33:02 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD+R Disc Manufacturer ID: VDSPMSAB, Media Type ID: 001, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 11:33:02 AM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:33:02 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 695568 (695568) = #695568/154:34.18 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 695568 blocks [D: Memorex DVD16+/-DL4RWlD2] -------------------------------------------------------------- 11:33:02 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1424523264, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 695568 | lead-out | 1 | 0x41 | 0x00 11:33:02 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:33:02 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:33:02 AM #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 11:33:02 AM #16 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 11:33:02 AM #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 11:33:02 AM #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 11:33:02 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:33:02 AM #20 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: VDSPMSAB Media type ID: 001 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 56 44 53 50 4D - 53 41 42 30 30 31 01 38 ...VDSPMSAB001.8 23 54 37 0C 00 50 6C 00 - AA 66 17 17 0B 0B 09 09 #T7..Pl..f...... 00 1A 1B 0B 0B 0E 0F 00 - 00 00 00 00 00 00 00 00 ................ 11:33:02 AM #21 Text 0 File DVDR.cpp, Line 6444 Drive: Memorex DVD16+/-DL4RWlD2 Book Type request [LO], rev 1: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:33:02 AM #22 CDR -1207 File DVDR.cpp, Line 5871 Book Type automatically set to: DVD-ROM 11:33:02 AM #23 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: No 11:34:55 AM #24 SPTI -1106 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x0a810000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11:34:55 AM #25 CDR -1106 File Writer.cpp, Line 302 Power calibration error D: Memorex DVD16+/-DL4RWlD2 11:34:55 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:34:55 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:34:55 AM #28 Text 0 File DVDR.cpp, Line 6444 Drive: Memorex DVD16+/-DL4RWlD2 Book Type request [LO], rev 1: DVD+R Changing the Book Type was finished successfully, return code 0 11:34:55 AM #29 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
hey there a couple things i notice this is generally considered a buggy version (most of the new ones are :/) so i suggest you write down your serial # then unistall nero. run this clean tool: http://www.nero.com/nero7/eng/Nero_7_Clean_Tool.html then download Nero version 7.0.8.2 from here: http://www.filehippo.com/download_nero_7_premium/?845 and install that. put in youserial # and it will unlock the trial and make it a full version. this is a lot of memory in use while burning try not to multi task while burning things these r just a couple of things i notice while just passing through. dont got time to look at it very closely sum1 else is bound to come along tho
Hi james111 Just to add to Xevlys post - Don't think your burn error Power calibration error is due to your version of Nero - your brand of media or the following may be the culprit. If you use Vision for .avi files though you may want to downgrade Nero. Here's Nero's explanation for this error: If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder. Please try the following solutions: * Update the firmware of your recorder. Please check the manufacturer's website for the latest version. * Try another brand of media. * Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal. * Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. * Send the recorder in for service. Not an 'A' list manufacturer. Better to use would be Verbatim or made in Japan only Fuji, Sony or Maxell. Can also use a firmware update - may not help with these discs since they are fully recognized by your drive. The latest version is JWS6. http://forum.rpc1.org/dl_firmware.php?download_id=2082 Try the suggestions and let us know how it goes - good, abd or otherwise!
i have about 11 .avi videos that i burned with that type of disc media. and i took out the drive that i was sharing the power with a few days ago ever since its been doing this. (ill try a differnt disk)
So this started when you removed another drive or am I reading this wrong? (think I am). You may want to try another power connection too -that may be the problem.
i got another problem i cant get that nero to install the version 7.0.8.2 everytime it stops when its about to end
finally i did everything told and i got it to work heres the log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS4 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Memorex DVD16+/-DL4RWlD2>Version: JWS4 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-00JHA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Memorex DVD16+/-DL4RWlD2 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Memorex DVD16+/-DL4RWlD2 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte BUFE : 0 Physical memory : 479MB (490992kB) Free physical memory: 31MB (32432kB) Memory in use : 93 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.7.2006 ISO compilation 1:07:35 PM #1 Text 0 File Isodoc.cpp, Line 6423 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 1:07:35 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:07:35 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:07:35 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: Memorex DVD16+/-DL4RWlD2 running 1:07:35 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:07:35 PM #6 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 1:07:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 282127 ( 62:41.52, 551MB) 1:07:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:07:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R Disc Manufacturer: GSC003 - Disc Application Code: 64, Disc Physical Code: 193 1:07:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:07:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 282128 (282128) = #282128/62:41.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 282128 blocks [D: Memorex DVD16+/-DL4RWlD2] -------------------------------------------------------------- 1:07:36 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 577798144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 282128 | lead-out | 1 | 0x41 | 0x00 1:07:36 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:07:36 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:07:36 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 1:07:36 PM #16 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 1:07:36 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 1:07:36 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 8x (11,080 KB/s) 1:07:36 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:07:36 PM #20 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode for Multisession 1:07:36 PM #21 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 1:07:36 PM #22 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:10:19 PM #23 Text 0 File WriterStatus.cpp, Line 116 <D: Memorex DVD16+/-DL4RWlD2> start writing Lead-Out at LBA 282128 (44E10h), length 0 blocks 1:10:19 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:10:19 PM #25 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 282127 1:10:26 PM #26 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 1:11:07 PM #27 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
