Sorry If I imposed myself on another thread, if I did, here is a new one. I am running a Dell laptop. Trying these new Sony DVD-R, version 2.1 accucores. Burned a CD-R today and it worked. Here's my log. Any help is good, thanks. 1C82-0000-19E5-MAAX-4004-0223-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 3 - 7.5.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.5.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom3 Generic DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1006MB (1030576kB) Free physical memory: 537MB (550052kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.11.2006 ISO compilation 9:06:39 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:06:40 PM #2 Text 0 File Isodoc.cpp, Line 6508 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:06:40 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 9:06:40 PM #4 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using DVD media 9:06:40 PM #5 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2185679 (485:42.29, 4268MB) 9:06:40 PM #6 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO (enabled: CD) 9:06:40 PM #7 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 9:06:40 PM #8 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:06:40 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2185680 (2185680) = #2185680/485:42.30 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2185680 blocks [Main] -------------------------------------------------------------- 9:06:40 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4476272640, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2185680 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2185680 | 0 | 0x00 2185680 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 9:06:40 PM #11 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:06:40 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 9:06:40 PM #13 Text 0 File Burncd.cpp, Line 4262 Cache writing successful. 9:06:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 9:06:40 PM #15 Phase 32 File dlgbrnst.cpp, Line 1746 Simulation started at 2x (2,770 KB/s) 9:06:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:06:40 PM #17 Text 0 File DVDR.cpp, Line 3026 Recording mode: Sequential Recording Mode 9:06:40 PM #18 Text 0 File DVDR.cpp, Line 3182 Start write address at LBA 0 DVD high compatibility mode: Yes 9:06:40 PM #19 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:06:40 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 293 D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 21 59 D0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 9:06:40 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1780 Illegal disc D: _NEC DVD+-RW ND-6500A 9:06:40 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1780 Could not perform start of Disc-at-once 9:06:40 PM #23 Phase 34 File dlgbrnst.cpp, Line 1746 Simulation failed at 2x (2,770 KB/s) 9:06:40 PM #24 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 9:06:40 PM #25 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 3:16:24 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 9:47:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi snohiphop Here's some suggestions for you. The drives firmware is up to date and you are using good media but you are getting this Illegal disc . Basically means your drives firmware doesn't support them. For this drive get some 8x media instead of the 16x speed you are using. Same brand or look for Verbatim or made in Japan Fuji or Maxell. Simulation failed at 2x Give it a shot at 4x if you can - see if that does any better. File 'Drivers\CDRALW2K.SYS' Roxio & Nero don't always play well together. Uninstall Roxio and run the zap tool to completely remove it. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml Give those a go and let us know.
@snohiphop You need to edit your Nero serial number out of your post. It starts 1C82.....and do what Binkie suggests.
I tried to change the media to FujiFilm in a hope that it would work. However, I get the same error. I did not see any 8x media at the Best Buy store. Also, my burner only burns at 2.4x max. Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 7.5.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.5.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 Generic DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1006MB (1030576kB) Free physical memory: 548MB (561736kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2006 ISO compilation 2:45:20 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 2:45:20 PM #2 Text 0 File Isodoc.cpp, Line 6508 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:45:20 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3313 First writeable address = 0 (0x00000000) 2:45:20 PM #4 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using DVD media 2:45:20 PM #5 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2185679 (485:42.29, 4268MB) 2:45:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO (enabled: CD) 2:45:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 2:45:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:45:20 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2185680 (2185680) = #2185680/485:42.30 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2185680 blocks [Main] -------------------------------------------------------------- 2:45:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4476272640, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2185680 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2185680 | 0 | 0x00 2185680 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 2:45:20 PM #11 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:45:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 2:45:20 PM #13 Text 0 File Burncd.cpp, Line 4262 Cache writing successful. 2:45:20 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 2:45:20 PM #15 Phase 32 File dlgbrnst.cpp, Line 1746 Simulation started at 2.4x (3,324 KB/s) 2:45:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:45:20 PM #17 Text 0 File DVDR.cpp, Line 3026 Recording mode: Sequential Recording Mode 2:45:20 PM #18 Text 0 File DVDR.cpp, Line 3182 Start write address at LBA 0 DVD high compatibility mode: Yes 2:45:20 PM #19 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:45:20 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 293 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 21 59 D0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 2:45:20 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1780 Illegal disc D: _NEC DVD+-RW ND-6500A 2:45:20 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1780 Could not perform start of Disc-at-once 2:45:20 PM #23 Phase 34 File dlgbrnst.cpp, Line 1746 Simulation failed at 2x (2,770 KB/s) 2:45:20 PM #24 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 2:45:20 PM #25 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 9:47:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
From what I found on this drives specs was 2.4x was the max for dual layer and 8x for -/+ R. If it's only giving a max speed on these discs of 2.4x it's another sign the drive doesn't fully recognize the media and will be hit or miss. Again you're getting the illegal disc on the Fuji's made by Ritek. My laptop (different drive then yours) doesn't like 16x media either - 8x not a problem. The laptop manufacturers are the ones to update the drive and they are not the best at keeping them up to date to handle the newer media. 8x media in store is getting harder to find depending where you are. I get Taiyo Yuden at http://supermediastore.com - you can still get 8x there.
Not a problem snohiphop You might also want to check out other stores like Staples, Office Depot, Circuit City etc for lower rated media - some may still have it in your area. Look for the ones posted above. I prefer to buy the majority of mine online cause I always know what I'm getting and who made it
