I recently upgraded the firmware on my NEC 1300a and ran DVDInfopro to change the booktype on the DVD+R media to DVD-ROM. I can burn DVD+R successfully (always could but just looking for better compatability - paritculary with my Car DVD player), but now I cannot burn DVD-R. My log file is attached. The first section is a successful +R burn, followed by the unsuccessful -R burn. Any help would be appreaciated. __________________________- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.8 Recorder: <_NEC DVD_RW ND-1300A> Version: 1.08 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.08 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2500JB-00EVA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 1 ID 1 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 1 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 2 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 3 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-1300A G: CDRom0 AXV CD/DVD-ROM R: CDRom1 AXV CD/DVD-ROM S: CDRom2 AXV CD/DVD-ROM T: CDRom3 AXV CD/DVD-ROM H: CDRom4 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 703MB (720368kB) Free physical memory: 253MB (260056kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.9.2005 UDF/ISO compilation 11:23:04 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 11:23:04 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 11:23:04 AM #3 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:23:04 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 11:23:04 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 11:23:04 AM #6 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-1300A running 11:23:04 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:23:04 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:23:04 AM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 11:23:04 AM #10 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2225743 (494:36.43, 4347MB) 11:23:04 AM #11 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 11:23:04 AM #12 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R 11:23:04 AM #13 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:23:04 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2225744 (2225744) = #2225744/494:36.44 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225744 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 11:23:04 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4558323712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2225744 | lead-out | 1 | 0x41 | 0x00 11:23:04 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:23:04 AM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 11:23:04 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:23:04 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 11:23:04 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:23:04 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x044E0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 11:23:04 AM #22 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 11:45:39 AM #23 Text 0 File WriterStatus.cpp, Line 116 <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2225744 (21F650h), lenght 0 blocks 11:45:39 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:45:58 AM #25 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 4:02:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 6:53:46 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.8 Recorder: <_NEC DVD_RW ND-1300A> Version: 1.08 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.08 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD2500JB-00EVA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 1 ID 1 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 1 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 2 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 3 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-1300A G: CDRom0 AXV CD/DVD-ROM R: CDRom1 AXV CD/DVD-ROM S: CDRom2 AXV CD/DVD-ROM T: CDRom3 AXV CD/DVD-ROM H: CDRom4 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 703MB (720368kB) Free physical memory: 327MB (335476kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.9.2005 UDF/ISO compilation 12:29:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 12:29:20 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 12:29:20 PM #3 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:29:20 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 12:29:20 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:29:20 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 12:29:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 12:29:20 PM #8 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 12:29:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2187055 (486:00.55, 4271MB) 12:29:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 12:29:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: MXL RG - 03 Disc Application Code: 64, Disc Physical Code: 193 12:29:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:29:20 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2187056 (2187056) = #2187056/486:0.56 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2187056 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 12:29:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4479090688, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2187056 | lead-out | 1 | 0x41 | 0x00 12:29:20 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:29:20 PM #16 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 12:29:20 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:29:20 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 1x (1,385 KB/s) 12:29:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:29:20 PM #20 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 12:29:20 PM #21 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 12:29:20 PM #22 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 12:29:20 PM #23 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:29:20 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x5F 0x30 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 12:29:20 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765 Illegal disc 12:29:20 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765 Could not perform start of Disc-at-once 12:29:20 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 6:53:46 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 4:02:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
from 1st log - - your firmware is out of date, it's not fully detecting the details of that +R disc from 2nd log - - not too bad, 6.6.0.16 is latest - your firmware is 4 revisions behind, 1.0C is here - http://forum.rpc1.org/dl_firmware.php?download_id=1517 - update the firmware - atapi drivers aren't loaded correctly, resolve via this - http://home.comcast.net/~bbmayo/FAQ.htm
Thanks..I updated the firmware...seems to work (first disc has a power calibration error, but the second did not). A couple of followups: - Cannot find section relating to configuring ATAPI in your link? - This version of the firmware does not allow bitsetting, which I though would make my DVD+r media more compatable? Thanks again.
re ATAPI - if that one's not working correctly try this - As to the bitsetting, might just have what you need here - http://www.herrie.org/firmwares/nec1300.html
