So I've been trying to burn Almost Famous for the past 2 days now. I've tried burning it 3 times and every time it freezes at the same spot and refuses to burn any longer, I have to end task since it is frozen so I don't get the log, I'll post one from a past successful burn and you can see if there might be any problems but otherwise, why the hell does it freeze all the time at the same spot, I've watched the entire file and it is fullproof. Any help would be extremely appreciated. Here is a past successful log: Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 103MB (106000kB) Memory in use : 86 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.6.2006 NeroAPI 3:09:22 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:09:22 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 3:09:22 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:09:22 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 3:09:22 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:09:22 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:09:23 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 3:09:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1696143 (376:55.18, 3312MB) 3:09:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:09:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 3:09:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:09:23 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1696144 (1696144) = #1696144/376:55.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1696144 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 3:09:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3473702912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1696144 | lead-out | 1 | 0x41 | 0x00 3:09:23 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:09:23 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:09:23 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:09:23 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 3:09:23 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:09:23 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 3:09:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:09:23 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 3:09:23 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 3:09:23 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:10:09 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 15:10:09.265 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 3:15:45 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1696144 (19E190h), length 0 blocks 3:15:45 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:15:45 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1696143 3:16:01 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s)
Try posting the NeroHistory.log in C:\Program Files\Nero\Nero 7\Core It might give us more information. Take out the serial number. Are you watching the buffer when it quits and does it look normal. If it stops at the same place every time, I would look at the file being transcoded.
Here's my entire history log minus the serial number: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 60MB (62052kB) Memory in use : 92 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.5.2006 NeroAPI 9:58:26 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 9:58:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 9:58:27 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:58:27 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 9:58:27 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:58:27 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:58:27 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 9:58:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1837903 (408:25.28, 3589MB) 9:58:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:58:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 9:58:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:58:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1837904 (1837904) = #1837904/408:25.29 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1837904 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 9:58:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3764027392, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1837904 | lead-out | 1 | 0x41 | 0x00 9:58:27 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:58:27 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:58:27 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 9:58:27 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 9:58:27 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 9:58:27 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 9:58:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:58:28 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 9:58:28 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 9:58:28 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:58:56 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 21:58:56.578 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 10:04:58 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1837904 (1C0B50h), length 0 blocks 10:04:58 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:04:58 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1837903 10:05:16 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 176MB (180832kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 NeroAPI 9:26:47 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 9:26:47 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 9:26:47 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:26:47 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 9:26:47 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:26:47 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:26:47 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 9:26:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1947807 (432:50.57, 3804MB) 9:26:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:26:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 9:26:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:26:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1947808 (1947808) = #1947808/432:50.58 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1947808 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 9:26:48 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3989110784, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1947808 | lead-out | 1 | 0x41 | 0x00 9:26:48 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:26:48 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:26:48 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 9:26:48 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 9:26:48 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 9:26:48 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 9:26:48 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:26:48 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 9:26:48 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 9:26:48 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:27:17 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 21:27:17.343 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 9:33:39 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1947808 (1DB8A0h), length 0 blocks 9:33:39 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:33:39 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1947807 9:33:57 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== juan snipe inc. 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 3 - 7.0.8.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 445MB (455916kB) Memory in use : 41 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2006 CueSheet 1:18:02 AM #1 Text 0 File Burncd.cpp, Line 3056 HL-DT-ST DVDRAM GSA-4163B Buffer underrun protection activated 1:18:02 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 1:18:02 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:18:02 AM #4 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using CD-R/RW media 1:18:08 AM #5 Phase 40 File dlgbrnst.cpp, Line 1730 Aborted by user 1:18:08 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Disc check failed: Medium not allowed (Wrong CD) 1:18:08 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:18:08 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B Medium not present 1:18:08 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: DVD-R. Medium required by compilation: CD-R/RW.) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/12/2004 9:04:49 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 171MB (175456kB) Memory in use : 77 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2006 NeroAPI 2:56:20 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:56:21 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 2:56:21 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:56:21 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 2:56:21 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:56:21 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:56:21 AM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 2:56:22 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1668319 (370:44.19, 3258MB) 2:56:22 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 2:56:22 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 2:56:22 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:56:22 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1668320 (1668320) = #1668320/370:44.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1668320 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 2:56:22 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3416719360, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1668320 | lead-out | 1 | 0x41 | 0x00 2:56:22 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:56:22 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:56:22 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 2:56:22 AM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 2:56:22 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 2:56:22 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 2:56:22 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:56:22 AM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 2:56:22 AM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 2:56:22 AM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:56:53 AM #24 Text 0 File Cdrdrv.cpp, Line 1211 02:56:53.125 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 3:02:24 AM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1668320 (1974E0h), length 0 blocks 3:02:24 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:02:24 AM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1668319 3:02:40 AM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 159MB (162896kB) Memory in use : 79 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2006 NeroAPI 10:50:22 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:50:23 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:50:23 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:50:23 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 10:50:23 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:50:23 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:50:23 AM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 10:50:23 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1982911 (440:38.61, 3872MB) 10:50:23 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:50:23 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 10:50:23 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:50:23 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1982912 (1982912) = #1982912/440:38.62 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1982912 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 10:50:23 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4061003776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1982912 | lead-out | 1 | 0x41 | 0x00 10:50:23 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:50:23 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:50:23 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 10:50:23 AM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 10:50:23 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 10:50:23 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 10:50:23 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:50:23 AM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 10:50:23 AM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 10:50:23 AM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:50:53 AM #24 Text 0 File Cdrdrv.cpp, Line 1211 10:50:53.718 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 10:57:22 AM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1982912 (1E41C0h), length 0 blocks 10:57:22 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:57:22 AM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1982911 10:57:40 AM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 154MB (158520kB) Memory in use : 79 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2006 NeroAPI 3:20:32 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:20:32 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 3:20:32 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:20:32 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 3:20:32 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:20:33 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:20:33 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 3:20:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1816623 (403:41.48, 3548MB) 3:20:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:20:33 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 3:20:33 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:20:33 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1816624 (1816624) = #1816624/403:41.49 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1816624 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 3:20:33 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3720445952, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1816624 | lead-out | 1 | 0x41 | 0x00 3:20:33 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:20:33 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:20:33 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:20:33 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 3:20:33 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:20:33 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 3:20:33 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:20:33 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 3:20:33 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 3:20:33 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:21:03 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 15:21:03.156 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 3:27:01 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1816624 (1BB830h), length 0 blocks 3:27:01 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:27:01 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1816623 3:27:19 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 5 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom5 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 206MB (211496kB) Memory in use : 73 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.5.2006 NeroAPI 3:38:21 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:38:21 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 3:38:21 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:38:21 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 3:38:22 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:38:22 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:38:22 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 3:38:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2015999 (447:59.74, 3937MB) 3:38:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:38:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 3:38:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:38:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2016000 (2016000) = #2016000/448:0.0 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2016000 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 3:38:22 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4128768000, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2016000 | lead-out | 1 | 0x41 | 0x00 3:38:22 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:38:22 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:38:22 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:38:22 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 3:38:22 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:38:22 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 3:38:22 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:38:22 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 3:38:22 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 3:38:22 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:38:53 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 15:38:53.625 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 3:45:28 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2016000 (1EC300h), length 0 blocks 3:45:28 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:45:28 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 2015999 3:45:46 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 94MB (96872kB) Memory in use : 87 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.5.2006 NeroAPI 2:27:14 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:27:19 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 2:27:19 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:27:19 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 2:27:19 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:27:19 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:27:19 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 2:27:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1943871 (431:58.21, 3796MB) 2:27:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 2:27:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 2:27:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:27:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1943872 (1943872) = #1943872/431:58.22 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1943872 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 2:27:20 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3981049856, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1943872 | lead-out | 1 | 0x41 | 0x00 2:27:20 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:27:20 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:27:20 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 2:27:20 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 2:27:20 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 2:27:20 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 2:27:20 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:27:20 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 2:27:20 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 2:27:20 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:27:51 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 14:27:51.625 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 2:34:13 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1943872 (1DA940h), length 0 blocks 2:34:13 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:34:13 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1943871 2:34:31 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 73MB (75672kB) Memory in use : 90 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.6.2006 NeroAPI 10:45:59 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:45:59 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:45:59 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:45:59 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 10:45:59 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:45:59 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:45:59 AM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 10:46:00 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1859119 (413:08.19, 3631MB) 10:46:00 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 10:46:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 10:46:00 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:46:00 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1859120 (1859120) = #1859120/413:8.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1859120 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 10:46:00 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3807477760, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1859120 | lead-out | 1 | 0x41 | 0x00 10:46:00 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:46:00 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:46:00 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 10:46:00 AM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 10:46:00 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 10:46:00 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 10:46:00 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:46:00 AM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 10:46:00 AM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 10:46:00 AM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:46:29 AM #24 Text 0 File Cdrdrv.cpp, Line 1211 10:46:29.562 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 10:52:35 AM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1859120 (1C5E30h), length 0 blocks 10:52:35 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:52:35 AM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1859119 10:52:53 AM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 81MB (83864kB) Memory in use : 89 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.6.2006 NeroAPI 11:31:41 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 11:31:42 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 11:31:42 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 11:31:42 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 11:31:42 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:31:42 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:31:42 AM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 11:31:42 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1960479 (435:39.54, 3829MB) 11:31:42 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:31:42 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 11:31:42 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:31:42 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1960480 (1960480) = #1960480/435:39.55 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1960480 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 11:31:42 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4015063040, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1960480 | lead-out | 1 | 0x41 | 0x00 11:31:42 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:31:42 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:31:42 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 11:31:43 AM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 11:31:43 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 11:31:43 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 11:31:43 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:31:43 AM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 11:31:43 AM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 11:31:43 AM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:32:11 AM #24 Text 0 File Cdrdrv.cpp, Line 1211 11:32:11.296 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 11:38:36 AM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1960480 (1DEA20h), length 0 blocks 11:38:36 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:38:36 AM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1960479 11:38:54 AM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 4C80-0010-8011-0000-2608-4739-1801 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 Generic DVD-ROM F: CDRom3 SCSI DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 103MB (106000kB) Memory in use : 86 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.6.2006 NeroAPI 3:09:22 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:09:22 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 3:09:22 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:09:22 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 3:09:22 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:09:22 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:09:23 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 3:09:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1696143 (376:55.18, 3312MB) 3:09:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:09:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 3:09:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:09:23 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1696144 (1696144) = #1696144/376:55.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1696144 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 3:09:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3473702912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1696144 | lead-out | 1 | 0x41 | 0x00 3:09:23 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:09:23 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:09:23 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:09:23 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 3:09:23 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:09:23 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 3:09:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:09:23 PM #21 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 3:09:23 PM #22 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 3:09:23 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:10:09 PM #24 Text 0 File Cdrdrv.cpp, Line 1211 15:10:09.265 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 3:15:45 PM #25 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1696144 (19E190h), length 0 blocks 3:15:45 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:15:45 PM #27 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1696143 3:16:01 PM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 8:55:45 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 9:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 3:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== and if it is the buffer what do you suggest I do?
These need to be on, go here for a guide to turn on, http://forums.afterdawn.com/thread_view.cfm/260038 Close down any unnecessary programs,including spyware dont multitask while burnining Slow to 4X
In the tutorial my thing is alrdy set on DMA if available but it still stays off. Also, I did a search and destroy, took out all spyware and had hardly any programs running, I also changed the speed to 4x. Here are some pictures. and The one of Nero is where it stops. I also got some new DVDs lately if that may be the problem since this hasn't been a problem since I got new DVDs. I got fujifilm DVDs, is that cool?
It's not a brand I would have recommended, I know nothing of them, I recommend Verbatim or Sony (made in japan) Taiyo Yuden. Your log file is saying DMA is OFF so just follow the guide.
