Here is my log using Nero Version: 6.6.0.6.... I am not sure if this is the right forum for this topic so if it's not please direct me to the right one... System specs: XP PRO SP2/Mandrake 10.1 ****DUAL BOOT*** Iwill KA266+ AOpen DUW 1608 burner w/ latest firmware Seagate 160gig Seagate40gig GFfx5200agp SBLive! value 1024gig crucial PC2100 ram AMD 1.2 proc. linksys nic card I can burn DVD'S in Linux no problem and CD'S in both XP and Linux. but when I try to burn DVD'S in XP this is happening. BTW it just started happening and reinstalling NERO **AFTER** removing all traces of it in the registry as well as uninstalling does no good. THIS WAS DONE AS A SIMULATION TO GET THIS LOG.... Thanks all!! home Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 6:32:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM Nero Version: 6.6.0.6 (Nero Express) Recorder: <AOPEN DUW1608/12X> Version: A070 - HA 1 TA 0 - 6.6.0.6 Adapter driver: <alihdd> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.6 Adapter driver: <a347scsi> HA 2 === Scsi-Device-Map === DiskPeripheral : ST3160023A 3.06 alihdd Port 0 ID 0 DMA: Off CdRomPeripheral : AOPEN DUW1608/12X A070 alihdd Port 1 ID 0 DMA: Off DiskPeripheral : ST340810A 3.39 alihdd Port 1 ID 1 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === AOPEN DUW1608/12X E: CDRom0 AXV CD/DVD-ROM F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 613MB (627908kB) Memory in use : 40 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.6.2005 ISO compilation 7:47:44 PM #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:47:44 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 7:47:44 PM #3 Text 0 File Writer.cpp, Line 122 Writer AOPEN DUW1608/12X running 7:47:44 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 7:47:44 PM #5 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 7:48:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2205327 (490:04.27, 4307MB) 7:48:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 7:48:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: AOPEN DUW1608/12X, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 7:48:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc for simulation. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 7:48:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2205328 (2205328) = #2205328/490:4.28 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2205328 blocks [AOPEN DUW1608/12X] -------------------------------------------------------------- 7:48:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [AOPEN DUW1608/12X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4516511744, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2205328 | lead-out | 1 | 0x41 | 0x00 7:48:16 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:48:16 PM #13 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 7:48:16 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:48:16 PM #15 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 8x (11,080 KB/s) 7:48:16 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:48:16 PM #17 Text 0 File DVDR.cpp, Line 2300 Recording mode: Sequential Recording Mode 7:48:16 PM #18 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 7:48:16 PM #19 Text 0 File DVDR.cpp, Line 2441 Start write address at LBA 0 DVD high compatibility mode: Yes 7:48:16 PM #20 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:48:16 PM #21 Text 0 File DVDR.cpp, Line 5619 Drive: AOPEN DUW1608/12X Book Type request [gen]: DVD-ROMDrive doesn't support changing Book Type for DVD-R 7:48:16 PM #22 CDR -1207 File DVDR.cpp, Line 4805 Book Type automatically set to: DVD-ROM 7:48:19 PM #23 SCSI -31 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05D30000 Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 7:48:19 PM #24 SCSI -31 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x064C0A00 Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 7:48:19 PM #25 Text 0 File Mmc.cpp, Line 18713 Writer-Buffer for AOPEN DUW1608/12X\H1 T0 reduced to 32768Bytes 7:48:19 PM #26 SCSI -31 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x064C0A00 Status: 0xE6 (0x0E, SCSI_BUFFER_TO_BIG) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 7:48:19 PM #27 CDR -31 File Writer.cpp, Line 311 Buffer too large AOPEN DUW1608/12X\H1 T0 7:48:19 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:48:19 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:48:19 PM #30 Text 0 File DVDR.cpp, Line 2682 EndDAO: Last written address was -1 7:48:19 PM #31 Text 0 File DVDR.cpp, Line 5619 Drive: AOPEN DUW1608/12X Book Type request [gen]: DVD+RWDrive doesn't support changing Book Type for DVD-R 7:48:21 PM #32 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 6:29:42 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\alihdd.sys': Ver=4.005, size=24645 bytes, created 3/21/2002 1:37:30 PM (Adapter driver for rec) File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 10:33:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
=== Scsi-Device-Map === DiskPeripheral : ST3160023A 3.06 alihdd Port 0 ID 0 DMA: Off CdRomPeripheral : AOPEN DUW1608/12X A070 alihdd Port 1 ID 0 DMA: Off DiskPeripheral : ST340810A 3.39 alihdd Port 1 ID 1 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off Try enabling DMA mode appears you have reverted to PIO
ALI takes care of that. (i don't understand why NERO shows it as OFF) And I have removed those and tried to use M$ basic IDE drivers with little success. The last time I went to DEVICE MNGR and removed ALI IDE DRIVERS my system locked and I had to use ERD commander to get what I could off the drives before reinstalling both systems. GOOD TIMES.....not
ALI IDE drivers seem to be the problem but how to SAFELY remove these and allow XP to use the standard IDE drivers just to see if thats REALLY the problem is beyond me. Under DEV MNGR it shows the ALI IDE drivers but it also shows PRI/SEC IDE channels that have a yellow exclamation mark...(CODE 12). Thanks again
Just tried to remove ALI IDE DRIVERS from add/remove... locked my sys up hard and had to kill power. tried that three time (even in safe-mode)....no luck. hmmmm....
How about writing it to the Hard Drive as an Image file, just to see if this process works. If it does, then I would agree that the issue is related to the IDE Controller and its settings. Are you using any Acceleration settings or features? Have you tried to change it to PIO Mode only just to see if this works? Normally we recommend using DMA, but I've seen some other cards have this same problem of reporting DMA as OFF and setting to PIO MODE solved the issue for one IDE Controller that shows this symptom. Regards, Craig Nero Inc USA
IMG file works fine... not using any accelerated setting.... Can't change any settings as far as PIO or DMA.... when I run the ALI utility it just shows what things are running and does not allow you to change anything. ****Are you using any Acceleration settings or features? Have you tried to change it to PIO Mode only just to see if this works? Normally we recommend using DMA, but I've seen some other cards have this same problem of reporting DMA as OFF and setting to PIO MODE solved the issue for one IDE Controller that shows this symptom. ***** What card are you refering to????
I've had a few customers with the Promise IDE controller show this issue, and one other IDE card that fails to come to mind right now. Regards, Craig Nero Inc USA
Hi PCMatt, I never said you were running a Card, I was only giving you an Example of similar issues I've seen before. You do have an IDE Controller though. Regards, Craig Nero Inc USA
K...got ya.. I found out what the problem was though (I think) I could not reinstall chipset drivers . I could not update them either. (whenever I did my system would lock). It finally would not allow me to even boot into windows. Thank god I had linux installed as well. Anyways, I saved what I could and whiped the drive clean and started over. Thats when I discovered that by hooking both hard drvies onto the primary IDE channel and setting both drives as cable select caused the 160gig to run in PIO mode. (before I had the 160 and my Aopen DVD burner on the same channel.) THAT caused both the DVD drive and the 160 to run in PIO mode..??? I guess ALI had some sort of limitation on drive larger than 137. Maybe i'm wrong...I dont know. But I hooked the 160 up to a IDE controller card (Fasttrack I think) and I'm good to go. (UDMA5)
