ALright guys I have been following this sight for a while and tried a lot of the suggestions, but still making coasters. I do a lot of VHS to DVD copies using pinacle Studio. i bought a LG light scribe dual layer burner about 3 months about. Burnt 30 dvd;s no problem. Then I started to get problems. I have tried 3 different brands of DVD's none of them have worked. Last night I made 8 dvd+r DL coaster and it hurts. THe burn process always fails right at the end of the burn processes. Just wondering if you guys can shed any light as I do not know how to read the nero log files. Here is the latest one Please help!!! Home -* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: 1808 - HA 1 TA 1 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3200822A atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3250623A atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-4166B E: CDRom0 TOSHIBA DVD-ROM SD-M1612 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 766MB (785200kB) Free physical memory: 57MB (59216kB) Memory in use : 92 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.12.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 9:24:09 PM #1 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:24:09 PM #2 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:24:09 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 192KB of Memory 9:24:09 PM #4 Text 0 File Reader.cpp, Line 124 Reader running 9:24:09 PM #5 Text 0 File Writer.cpp , Line 122 Writer Image Recorder running 9:24:09 PM #6 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 1595311 / 0x1857AF / 3115MB S01 T01 Con 0x04 Start 0 Len 3190624 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 9:24:09 PM #7 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 3190624 = 3190624, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:24:09 PM #8 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 9:24:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 3190623 (709:01.48, 6231MB) 9:24:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 9:24:09 PM #11 Text 0 File DlgWaitCD.cpp , Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:24:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 3190624 (3190624) = #3190624/709:1.49 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3190624 blocks [Image Recorder] -------------------------------------------------------------- 9:24:10 PM #13 Text 0 File ThreadedTransferInterface.cpp , Line 1059 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6534397952, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3190624 | lead-out | 1 | 0x41 | 0x00 9:24:10 PM #14 Phase 120 File dlgbrnst.cpp, Line 1685 Creating the image for burning 9:24:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:36:25 PM #16 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 3190624 (30AF60h), lenght 0 blocks 9:36:25 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:36:25 PM #18 Phase 121 File dlgbrnst.cpp, Line 1685 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 9:36:34 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 9:36:34 PM #2 Text 0 File Reader.cpp, Line 124 Reader running 9:36:34 PM #3 Text 0 File Writer.cpp , Line 122 Writer HL-DT-ST DVDRRW GSA-4166B running 9:36:34 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 6534397952 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00: 00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=709:01.49 ( 3190624) RecDep=0x00 LBRK: Last LBA on layer 0 = 1595311 / 0x1857AF / 3115MB MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <H:\TempImage.nrg> 9:36:34 PM #5 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 9:36:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 4173823 (927: 30.73, 8151MB) Last address to be written: 3190623 (709:01.48, 6231MB) 9:36:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 9:36:34 PM #8 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: HL-DT-ST DVDRRW GSA-4166B, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 9:36:34 PM #9 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:36:34 PM #10 Text 0 File ThreadedTransferInterface.cpp , Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 3190624 (3190624) = #3190624/709:1.49 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3190624 blocks [HL-DT-ST DVDRRW GSA-4166B] -------------------------------------------------------------- 9:36:34 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [HL-DT-ST DVDRRW GSA-4166B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6534397952, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3190624 | lead-out | 1 | 0x41 | 0x00 9:36:34 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:36:34 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:36:34 PM #14 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5,540 KB/s) 9:36:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:36:34 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 631 L0 Data Zone Capacity set to 1595312 (1857B0h, 3115MB) -> OK, confirmed setting 9:36:34 PM #17 CDR -1205 File DVDPlusDualLayer.cpp, Line 658 Burning Layer 1 9:36:34 PM #18 Text 0 File DVDPlusDualLayer.cpp, Line 668 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 9:36:34 PM #19 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RITEK... Media type ID: D01 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@ 25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %7..(d.(d...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 9:36:34 PM #20 Text 0 File DVDR.cpp, Line 5533 Drive: HL-DT-ST DVDRRW GSA-4166B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 9:36:34 PM #21 CDR -1207 File DVDR.cpp, Line 5463 Book Type automatically set to: DVD-ROM 9:36:34 PM #22 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 9:49:26 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 289 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 00 00 18 57 A0 00 00 10 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80 Buffer x0c941600: Len x8000 0x00 00 01 BA 45 17 7F 07 AD 57 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 1D 8F 38 4C B2 24 BF 4D B3 0x53 2C 23 6E 6B 5A 54 71 CC 17 12 0F 67 17 0D C8 9:49:26 PM #24 CDR -1135 File Writer.cpp, Line 311 Write error E: HL-DT-ST DVDRRW GSA-4166B 9:49:26 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:49:26 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:49:26 PM #27 Phase 127 File dlgbrnst.cpp, Line 1685 Generating DVD high compatibility borders 9:49:27 PM #28 Phase 129 File dlgbrnst.cpp, Line 1685 Generating DVD borders completed successfully 9:49:27 PM #29 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 8/1/2006 2:48:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Well first off, don't use Nero to burn your DLs. Use a program called IMGBurn to first build and then write an ISO. Anyway, That's very high mem usage. Make sure you don't multitask during your burns. Too fast burn for a DL. Burn @ 2.4x! Get back to us.
I will try IMGBurn Quote: -------------------------------------------------------------------------------- Physical memory : 766MB (785200kB) Free physical memory: 57MB (59216kB) Memory in use : 92 -------------------------------------------------------------------------------- as far as multitasking that is wierd that that much memory was being used I clicked burn and went upstairs. (I even shutdown my virus scan but left open my task manager) I looked back and didn't see a spike like that Quote: -------------------------------------------------------------------------------- Burn process failed at 4x (5,540 KB/s) -------------------------------------------------------------------------------- I will try another speed, for some reason it seemed that nero had that option grayed out for the set of DVD's I was using. Maybe I just did not let it fully load or something? I will try right when I get home...
ImgBurn is great. You may want to check for updates to the firmware on your burner as well. http://forum.rpc1.org/dl_search.php Nero 6.6.0.18 is the most stable of the 6 series version of Nero. Consider an update to that even if you use ImgBurn for the DLs. Be sure to get the Clean Tool from the Nero site if you change versions.
So I tried the things that were suggested. I use IMGBurn and I made the iso file. I then went to burn it to a DVD and it said that the dvd it was burning to did not have enough space. I tried three different brands all these dvd's are dual layer. The brands are memerox, fugi, and verbatiam. I am wondering if this application does not have support for my burner, which is a LG light scribe. I do not have the model numbers in front of me right now. I also noticed that the memorex say they can be burnt at 2.4x but all the applications I have tried them in will only allow to select 4x. I thought it was strange that I can pull 6GB of data off a DVD but can not write it back to a DL. Has anyone else seen this before??? I also did a search for my firm ware updates and there were not any new ones. Do you think that it may be a DVD issue? I assume that this would be hard to prove to a store that it is there problem as this isn't even 3 months old yet. I suppose I could just drop the dough on a new one and find out. Open to try anything, So please help!
