I recently purchased an hp media center.I use windows xp .i installed nero 7 and found when burning dvds that i would get a 1 second stutter during playback.i do not receive any message errors.i contacted hp and they tell me nero is not supported by this dvd burner(hp 840b) ,they did suggest a more recent firmware which i downloaded hi86 .this firmware was supposed to fix compatability with nero and sonic (sonic came with the pc).after trying hi86 i received the same problem.i then uninstalled nero and used sonic and get the same result.these are little 1 second stutter thats occur at various points during playback,they vary from 10 to 13 minutes apart.picture quality is fine ,audio is fine and burning cds is not an issue.just these frustrating 1 second stutters.i do have dvd decrytor and dvd shrink on my drive as well.i have since uninstalled sonic and have nero 7 installed and am still getting the same result.
Nero and Sonic are known to conflict with each other. Choose 1 or the other. After choosing what 1 you want to use uninstall both and go to both websites and download clean tools that they offer to make sure all parts of the programs are uninstalled.(drivers, Regestry etc etc) Once you do that then install whatever program you have decided to use. Make sure you go to the websites and find and download the clean tools for each program. nero clean tool--- > http://ww2.nero.com/nero7/enu/Clean_Tools.html Theres also a Roxio Zap utility that is supost to clean out Roxio program. Do a search for it.
Would you by any chance be talking about the layer break? When encoding to a DVD5 it should be removed. Some backup apps don't handle the layer break very well when recording DL. Just wondering if this may be what you're seeing and if so are you recording DVD5 or DL? With Nero don't install InCD and with Sonic make sure any of it's apps aren't running in the background when trying to use Nero, and vice versa. Batch writing causes interference due to tying up the burner, but isn't known for 1 second hesitations.
thx for the reply.took your advis and uninstalled both and cleaned after uninstall.i then reinstalled nero and appear to have the same result.i am burning something that i ripped while i had both sonic and nero on my computer useing dvd shrink.is it possible the issue happened in the ripping even though i dont see it when watching the original during playback or are there any other suggestions.
The way you phrased it, I didn't catch it at first. You get the "stutters" throughout the playback of the backup at 10-13 minute intervals. That leaves out the layer break. That's a single occurrence. Okay, I notice you get a clear playback. That means something is happening between the PC, the burned disc, and the player. Have you tried using a different brand of media and what are you using now? Use DVD Identifier (free) and post the info here.
ive been useing comp usa brand disks but i also use sonys and appear to get the same results.heres the weird part .i keep burning the same movie over and over and check the results and the stutter happens in the same ex act spot every time .on other things i have burned over and over i have had the same occurance.same spot every time.not sure what you wanted posted hope this is it.this is from the comp usa disk.thx for the help this is driving me crazy. ** INFO : Drive = HP DVD Writer 840b - [FW HI86] - [ATAPI] ** INFO : Write Capabilities = DVD+R DVD+R-DL DVD+RW ** INFO : Write Capabilities = DVD-R DVD-R-DL DVD-RW DVD-RAM ** INFO : Disc = [DVD-R:AML] ** INFO : Reference Speed : 1x DVD = 1385 kBps ** INFO : An Writeable Disc Is Recommended For Accurate Results ** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below ** INFO : GET PERFORMANCE Write Speed Descriptor(s) Descriptor #1 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV] ** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command] ** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported Descriptor #1 = 5540 kBps ( 4.00x) - [CLV/Non-Pure CAV]
Actually, I was wanting info on the media from DVD Identifier or another app. I was curious as to what you were using. Since Nero is involved you may want to get a mod, such as Creaky, to move the thread to the Nero section. You may get more help there. I won't be doing much more help here at AD, so someone else will need to take over helping you. I regret I wasn't more help in isolating the cause of your problem.
right, have had a quick scan thru the thread... Nero 6.x doesn't handle the layer break properly, not sure if Nero 7.x does, however let's have a look at a Nero logfile entry - let's have LAST section of your Nero log which lives in C:\Program Files\Nero\Nero 7\Core\NeroHistory but DO NOT post your serial number which usually begins with '5C80' or similar. You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
thx .i reposted my thread on the nero forum evidently that is something i should not have done.sorry .wont happen again.heres what i got . Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/18/2005 12:15:31 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.0.0.0 Using interface version: 6.6.0.12 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Recorder: <HP DVD Writer 840b> Version: HI86 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 840b atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM TS-H352C atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD2500JS-60MHB1 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 840b E: CDRom0 TSSTcorp DVD-ROM TS-H352C F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046952kB) Free physical memory: 463MB (474340kB) Memory in use : 54 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.4.2006 NeroAPI 10:44:03 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 10:44:03 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 10:44:03 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:44:03 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 10:44:03 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 10:44:03 PM #6 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 840b running 10:44:03 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 10:44:03 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 10:44:04 PM #9 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 10:44:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1813167 (402:55.42, 3541MB) 10:44:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 10:44:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: HP DVD Writer 840b, Media type: DVD-R Disc Manufacturer: AML - Disc Application Code: 64, Disc Physical Code: 193 10:44:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:44:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1813168 (1813168) = #1813168/402:55.43 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813168 blocks [E: HP DVD Writer 840b] -------------------------------------------------------------- 10:44:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: HP DVD Writer 840b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3713368064, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1813168 | lead-out | 1 | 0x41 | 0x00 10:44:04 PM #16 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:44:04 PM #17 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 10:44:04 PM #18 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 10:44:04 PM #19 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 10:44:04 PM #20 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 4x (5,540 KB/s) 10:44:04 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:44:04 PM #22 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 10:44:04 PM #23 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON 10:44:04 PM #24 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 10:44:04 PM #25 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:55:41 PM #26 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 840b> start writing Lead-Out at LBA 1813168 (1BAAB0h), length 0 blocks 10:55:41 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:55:41 PM #28 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 1813167 10:56:11 PM #29 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/18/2005 12:15:31 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 4:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
no worries... i chopped the serial number out and unfortunately realised the other burn entry with the Sony disc might have helped but i've deleted it now - oops. you could post again however for now i think there's enough to go on.. - out if date, update to 7.0.8.2 from here - http://www.nero.com/nero7/eng/nero7-up.php - still looking for firmware info but i believe this is a relatively new burner so firmware shouldn't be out of date - now they are subpar quality discs...
yeah i figured the first disk was subpar .here is the sony info.ill update nero. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/18/2005 12:15:31 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.0.0.0 Using interface version: 6.6.0.12 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Recorder: <HP DVD Writer 840b> Version: HI86 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 840b atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM TS-H352C atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD2500JS-60MHB1 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 840b E: CDRom0 TSSTcorp DVD-ROM TS-H352C F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046952kB) Free physical memory: 244MB (250480kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.4.2006 NeroAPI 2:23:12 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:23:13 PM #2 Text 0 File ThreadedTransfer.cpp, Line 496 Tried to get 262144 KB of memory 2:23:13 PM #3 TRANSFER -5 File ThreadedTransfer.cpp, Line 497 Error: not enough memory 2:23:13 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 131072KB of Memory - requested 262144KB of Memory 2:23:13 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 2:23:13 PM #6 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 840b running 2:23:13 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 2:23:13 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 2:23:13 PM #9 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 2:23:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1451375 (322:31.50, 2834MB) 2:23:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 2:23:13 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: HP DVD Writer 840b, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 2:23:13 PM #13 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:23:13 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1451376 (1451376) = #1451376/322:31.51 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1451376 blocks [E: HP DVD Writer 840b] -------------------------------------------------------------- 2:23:13 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: HP DVD Writer 840b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2972418048, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1451376 | lead-out | 1 | 0x41 | 0x00 2:23:13 PM #16 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:23:15 PM #17 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 2:23:15 PM #18 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 2:23:15 PM #19 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 2:23:15 PM #20 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 4x (5,540 KB/s) 2:23:15 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:23:15 PM #22 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 2:23:15 PM #23 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON 2:23:15 PM #24 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 2:23:15 PM #25 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:32:38 PM #26 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 840b> start writing Lead-Out at LBA 1451376 (162570h), length 0 blocks 2:32:38 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:32:38 PM #28 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 1451375 2:33:08 PM #29 Phase 161 File APIProgress.cpp, Line 278 Burn process completed successfully with warnings Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/18/2005 12:15:31 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 4:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i don't know much about Sony discs, don't use them myself. this isn't too good in that log - - nearly all that gig of RAM was eaten up by something, you need sufficient memory prior to all burning..
firmware update http://h10025.www1.hp.com/ewfrf/wc/...softwareitem=dv-39047-1&jumpid=reg_R1002_USEN Sony is good, at least the 8X +R. #1 at digitalfaq. I've used a hundred or so with excellent results. Follow Creaky's advice and update the software and update the firmware. Then try another project and post the Nero log if you still have the same problem. Remember to use good media. Creaky knows his stuff, so listen to him.
Creaky Does this mean anything? 2:23:13 PM #2 Text 0 File ThreadedTransfer.cpp, Line 496 Tried to get 262144 KB of memory 2:23:13 PM #3 TRANSFER -5 File ThreadedTransfer.cpp, Line 497 Error: not enough memory 2:23:13 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 131072KB of Memory - requested 262144KB of Memory
@brobear - well spotted, yup, considering this - in conjunction with your post, in this instance the buffer wanted 262MB of memory and was snubbed with only 131MB... more memory needs to be freed up prior to all burns...
Creaky Does this about sum it up? 1) Needs RAM (free it up or install more) 2) Needs Software Update 3) Needs Firmware Update 4) Remember to use good media.
This might help with your Memory Error Solution: You have a basic problem with your Windows swap file - it's to low. How much free disk space do you have on your hard disk? Try these two things: 1. Reboot - can free up some space in your memory or swap file - you could have too much applications running at the same time. 2. Add some swap space. How to do: right clic on desktop --> properties --> advanced --> performances --> advanced --> modify --> choose a memory size x1.5 than the RAM size (e.G i choose 512 for initial and 512 for max).
nero has been updated ,firmware updated ,ill toss the crap disks.appears that i have my first non coaster.dvd played flawless through section that has previously been a problem.i will still need to address the ram situation.i really appreciate the help ,i was going nuts .heres the most recent burn. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/18/2005 12:15:31 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Internal Version: 7, 0, 8, 2 Recorder: <HP DVD Writer 840b> Version: HJ86 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 840b atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM TS-H352C atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD2500JS-60MHB1 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HP DVD Writer 840b E: CDRom0 TSSTcorp DVD-ROM TS-H352C F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1046952kB) Free physical memory: 296MB (303440kB) Memory in use : 71 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.4.2006 NeroAPI 5:22:45 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 5:22:45 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 5:22:45 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 5:22:45 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 5:22:45 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 5:22:45 PM #6 Text 0 File Writer.cpp, Line 113 Writer E: HP DVD Writer 840b running 5:22:45 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 5:22:45 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 5:22:45 PM #9 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 5:22:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1813167 (402:55.42, 3541MB) 5:22:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 5:22:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HP DVD Writer 840b, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 5:22:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:22:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1813168 (1813168) = #1813168/402:55.43 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813168 blocks [E: HP DVD Writer 840b] -------------------------------------------------------------- 5:22:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HP DVD Writer 840b] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3713368064, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1813168 | lead-out | 1 | 0x41 | 0x00 5:22:45 PM #16 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:22:45 PM #17 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:22:45 PM #18 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 5:22:45 PM #19 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 5:22:45 PM #20 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 5:22:45 PM #21 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 5:22:45 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:22:45 PM #23 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 5:22:45 PM #24 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 5:22:45 PM #25 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:30:02 PM #26 Text 0 File WriterStatus.cpp, Line 116 <E: HP DVD Writer 840b> start writing Lead-Out at LBA 1813168 (1BAAB0h), length 0 blocks 5:30:02 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:30:02 PM #28 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 1813167 5:30:32 PM #29 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/18/2005 12:15:31 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 4:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
