I've been burning DVD's for a very long time, then just last week, it wouldn't burn any dvd's anymore saying there was an internal target failure. I updated the firmware for my dvr drive, but it didn't help. I have the log file, can someone please help me! Nero version: 6.0.0.6 (Nero Express) Recorder: <PIONEER DVD-RW DVR-104> Version: 4.20 - HA 1 TA 0 - 6.0.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S400/A >Version: 2.2N - HA 1 TA 1 - 6.0.0.6 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: Off ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 503MB (515436kB) Free physical memory: 133MB (136496kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.3.2006 UDF/ISO compilation 12:24:57 AM #1 Phase 112 File dlgbrnst.cpp, Line 1852 DVD-Video files reallocation started 12:24:57 AM #2 Phase 114 File dlgbrnst.cpp, Line 1852 DVD-Video files reallocation completed (no file modified) 12:24:57 AM #3 Text 0 File Isodoc.cpp, Line 5506 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:24:57 AM #4 Phase 111 File dlgbrnst.cpp, Line 1852 DVD-Video files sorted 12:24:57 AM #5 Text 0 File Reader.cpp, Line 118 Reader running 12:24:57 AM #6 Text 0 File Writer.cpp, Line 127 Writer PIONEER DVD-RW DVR-104 running 12:24:57 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3821 First writeable address = 0 (0x00000000) 12:24:57 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3821 First writeable address = 0 (0x00000000) 12:24:57 AM #9 Text 0 File Burncd.cpp, Line 3088 Turn on Disc-at-once, using DVD media 12:25:13 AM #10 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2286113 (508:01.38) 12:25:13 AM #11 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 12:25:13 AM #12 Text 0 File DlgWaitCD.cpp, Line 1710 Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 12:25:14 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2286114 (2286114) = #2286114/508:1.39 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286114 blocks [PIONEER DVD-RW DVR-104 ] -------------------------------------------------------------- 12:25:14 AM #14 Text 0 File Burncd.cpp, Line 3323 Recorder and media-info: Burning to PIONEER DVD-RW DVR-104 on a DVD-R media 12:25:14 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder PIONEER DVD-RW DVR-104 for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387301376 12:25:14 AM #16 Phase 24 File dlgbrnst.cpp, Line 1852 Caching of files started 12:25:14 AM #17 Phase 25 File dlgbrnst.cpp, Line 1852 Caching of files completed 12:25:14 AM #18 Phase 36 File dlgbrnst.cpp, Line 1852 Burn process started at 2x (2,760 KB/s) 12:25:14 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 12:25:14 AM #20 Text 0 File dlgbrnst.cpp, Line 1712 Set remaining time: 28:15,548 (1695548ms) -> OK 12:25:14 AM #21 Text 0 File DVDR.cpp, Line 1418 Recording mode: Sequential Recording Mode 12:25:14 AM #22 Text 0 File Mmc.cpp, Line 18510 Set BUFE: supported -> ON 12:25:14 AM #23 Text 0 File DVDR.cpp, Line 1533 Start write address at LBA 0 DVD high compatibility mode: Yes 12:25:14 AM #24 Text 0 File Cdrdrv.cpp, Line 7842 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:25:16 AM #25 Text 0 File Writer.cpp, Line 318 00:25:16.176 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec) 12:25:24 AM #26 SCSI -1061 File Cdrdrv.cpp, Line 1364 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04500000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 12:25:24 AM #27 CDR -1061 File Writer.cpp, Line 335 Internal target failure 12:25:24 AM #28 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 12:25:24 AM #29 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 12:25:24 AM #30 Text 0 File dlgbrnst.cpp, Line 1712 Set remaining time: 0:00,000 (0ms) -> OK 12:25:24 AM #31 Text 0 File dlgbrnst.cpp, Line 1712 Set remaining time: 0:00,000 (0ms) -> OK 12:25:24 AM #32 Phase 38 File dlgbrnst.cpp, Line 1852 Burn process failed at 2x (2,760 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thank you!
This is horrible media and in my opinion is the cause of your failed burns. I would suggest trying some Verbatim, Taiyo Yuden or Sony (made in Japan) Backs up what I was saying about your discs, your pioneer doesnt recognize them. Your Nero is also very old, I would update from this link http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe Both these need to be on, go here for a guide http://forums.afterdawn.com/thread_view.cfm/260038 you can safely burn at 4X, Cheers.
Thanks for your help, but it still won't work. It worked once, at1X but then when I tried again, it just won't do it, here's the log again. sorry thank you soooo much! Project type: Copy entire DVD Target size: DVD5 (2282925) 13:46:48 File LangStreamPatcher.cpp, Line 56 Command table patching started... 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 3 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 5 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 1 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 2 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 3 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 37 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 38 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 39 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 40 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 41 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 42 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 43 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 44 patched! 13:46:48 File LangStreamPatcher.cpp, Line 101 VTS 1 - VTS_PGCITI - PGC 45 patched! 13:46:48 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: PIONEER DVD-RW DVR-104 Number of copies: 1 Write speed: 0 KB/s Temp folder: D:\temp\temp (23690002432 bytes free) Direct burning: true Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 13:46:51 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Menus Vobs [653 vobus] 77.28MB -> 76.73MB [R 0.98] Video: 68.01MB, extra: 8.72MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 7.10MB [enabled] Subpicture: 1 streams 0. 0. Unspecified 0.34MB [enabled] VTS_01 Title Vobs [20046 vobus] 4156.99MB -> 4153.68MB [R 1.00] Video: 3613.67MB, extra: 540.01MB Audio: 3 streams 0. 0. Dolby Digital 5-ch English 461.45MB [enabled] 1. 1. Dolby Digital 2-ch English 6.09MB [enabled] 2. 2. Dolby Digital 2-ch English 28.21MB [enabled] Subpicture: 3 streams 0. 0. English 5.11MB [enabled] 1. 1. French 0.00MB [disabled] 2. 2. Spanish 0.00MB [disabled] VTS_02 Title Vobs [1286 vobus] 229.34MB -> 228.02MB [R 0.98] Video: 209.96MB, extra: 18.07MB Audio: 3 streams 0. 0. Dolby Digital 5.1-ch English 0.00MB [enabled] 1. 1. Dolby Digital 5.1-ch English 0.00MB [enabled] 2. 2. Dolby Digital 2-ch English 15.56MB [enabled] Subpicture: 3 streams 0. 0. English 0.00MB [enabled] 1. 1. French 0.00MB [disabled] 2. 2. Spanish 0.00MB [disabled] 13:46:51 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 13:47:12 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 13:47:12 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2286462 sectors (2298496) 13:47:13 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2286462 sectors (2282927 required) 13:47:13 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4465.75MB (4464.02MB obtained) 13:47:13 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 13:47:14 File vob_record.cpp, Line 643 DirectBurn offset: VTS_01_0.VOB 160 13:47:18 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Menus Vobs VTS_01 Menus Vobs: Original 77.28MB -> Expected 77.28MB -> Output 77.27MB Finished error -0.00MB Ratio encoded = 2 Original encoded = 651 Slide encoded = 0 StillImage encoded = 0 Output extra size = 8.73MB Source video size = 68.54MB Pictures Modified [I 1] [P 0] [B 20] 13:47:26 File NeroRecorder.cpp, Line 641 Burn failed (3) ----- Begin NeroAPI error log ----- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\Nero\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 18e Recorder: <PIONEER DVD-RW DVR-104> Version: 4.20 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-104 E: CDRom0 ASUS CD-S400/A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515436kB) Free physical memory: 140MB (143596kB) Memory in use : 72 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.3.2006 NeroAPI 1:47:12 PM #1 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: -1 ( 0:00.-1, 0MB) 1:47:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 1:47:12 PM #3 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 1:47:12 PM #4 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:47:13 PM #5 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode for Multisession 1:47:13 PM #6 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 1:47:13 PM #7 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: No 1:47:13 PM #8 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:47:13 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1005 Estimated filesystem size: 544 1:47:13 PM #10 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 1x (1,385 KB/s) 1:47:14 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 0. Length: 592 1:47:14 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1869 Reserved start fragment at 0 1:47:14 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 592. Length: 112 1:47:14 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_0.VOB at sector 704 1:47:26 PM #15 SCSI -1061 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x043AEE00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x05 0xD0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 1:47:26 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2113 Failed to write cache to disc at 1504 1:47:26 PM #17 Phase 179 File APIProgress.cpp, Line 276 Writing file to disc failed 1:47:26 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 2 #0: Start: 0, Size: 576 #1: Start: 592, Size: 96 1:47:26 PM #19 SCSI -1064 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x043AEE00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x05 0xD0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x21 0x02 1:47:52 PM #20 SCSI -1061 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 1:47:56 PM #21 SCSI -1061 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 1:48:00 PM #22 SCSI -1061 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 1:48:04 PM #23 SCSI -1061 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 1:48:04 PM #24 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 13:48:04 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
Good to see someone taking our advice, I see you have implemented MOST changes except your media. Memorex or CMC Mag discs are really poor quality and will cause problems, I think if you change your media your problems will be solved. 1X is a little slow, try 4X with decent media. Please give it a go, Cheers.
I tried to change to sony media, and I have nero set to use max burning speed, but it still will not work any other suggestions?
The last burn log you supplied shows CMC Mag media being used. It is crap media, Sony(made in Japan) is good but it's NOT made by CMC Mag.
