I am using Nero Vision Express 2 to burn a 90 minute movie (mpg file) I made. It transcodes about 85% and then gives this error: Unable to prepare data for recording: transcoding of videos failed. (internal error 2009235751) I saved a log of this problem which has tons of gobbledy & ends thusly: ERROR: cause: 57 (file_not_found) source: _VOBS description: The system cannot find the file specified. ########################################################################################## DumpExceptionInformation(): Caught SEH Exception 0xe06d7363 during encoding DumpExceptionInformation(): Exception was raised from C:\WINDOWS\system32\kernel32.dll at RVA 0x00012a5b ########################################################################################## ERROR: cause: 128 (nmc_processing_exception) source: _VOBS:oGuardedProcessing () description: Exception during encoding ########################################################################################## ***END: _VOBS - Process VOB ***END: _VOBS - Process Create ***END: _DVDBase - Create VTS DVDENGINE exception caught. ***END: DVDVideoSessionImpl - GetDiscContent ***BEGIN: DVDSessionBase - RegisterCallback ...Session callback unregistered... ***END: DVDSessionBase - RegisterCallback Why, electronics, have you forsaken me?
Likewise to me, can you check here for a history log...if it's different then post that one Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory VISTA: …. Desktop/Your Comp Name/App Data/Roaming/Ahead/Nero History BTW: you have posted the first log twice.
I tried this again, and it failed but not until trying had lasted 10 hours. It saves a huge amount of temporary files as it goes, and just gets incredibly slow. Here's the history log: 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 23 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.8.2007 NeroAPI 5:34:50 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 5:34:50 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 5:34:50 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 5:34:50 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 5:34:50 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 5:34:50 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 5:34:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:34:50 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:34:50 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 5:34:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 5:34:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 5:34:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 0 5:34:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:34:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 5:34:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 5:34:55 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 5:34:55 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 5:34:55 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 5:34:55 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 5:34:55 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:34:55 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 25E22F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 5:34:55 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 6:21:22 PM #23 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 6:21:22 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:21:22 PM #25 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 6:21:23 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 6:21:23 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 16 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.8.2007 NeroAPI 7:51:11 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 7:51:11 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 7:51:11 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 7:51:11 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 7:51:11 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 7:51:11 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:51:11 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:51:11 PM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:00:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 10:00:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c Medium not present 10:00:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.) 10:00:48 PM #12 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:00:48 PM #13 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 17 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.8.2007 NeroAPI 11:26:54 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 11:26:54 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 11:26:54 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 11:26:54 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 11:26:54 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:26:54 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:26:54 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:26:54 PM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:41:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 11:41:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c Medium not present 11:41:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.) 11:41:30 PM #12 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 11:41:30 PM #13 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 16 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.8.2007 NeroAPI 12:23:10 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:23:10 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:23:10 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:23:10 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 12:23:10 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:23:10 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:23:10 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:23:10 AM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 5:54:29 AM #9 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 5:54:29 AM #10 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c Medium not present 5:54:29 AM #11 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.) 5:54:29 AM #12 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 5:54:29 AM #13 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== None 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HP DVD Writer 400c >Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 21 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.8.2007 UDF/ISO compilation 7:06:53 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 7:06:54 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 7:06:54 AM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 7:06:54 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 7:06:54 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 7:06:54 AM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 7:06:54 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:06:54 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:06:54 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 7:06:54 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1877455 (417:12.55, 3666MB) 7:06:54 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 7:06:54 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+R 7:06:54 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:06:54 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1877456 (1877456) = #1877456/417:12.56 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1877456 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 7:06:54 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3845029888, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1877456 | lead-out | 1 | 0x41 | 0x00 7:06:54 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:06:54 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 7:06:54 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:06:54 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 7:06:54 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:06:54 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C9E0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 7:06:54 AM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 7:40:53 AM #23 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 1877456 (1CA5D0h), lenght 0 blocks 7:40:53 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:41:13 AM #25 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 20 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.9.2007 NeroAPI 10:28:12 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:28:12 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:28:12 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:28:15 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 10:28:15 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:28:15 AM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 10:28:15 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:15 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:15 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:28:17 AM #10 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RITEK... Media type ID: 004 Product revision number: 48 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 10:28:17 AM #11 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 10:28:25 AM #12 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 10:28:25 AM #13 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 10:28:25 AM #14 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 0 10:28:25 AM #15 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= This disc is not empty. (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW.) Accessing disc... (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW.) 10:28:25 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 10:28:25 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 10:28:26 AM #18 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:28:26 AM #19 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 10:28:26 AM #20 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:28:26 AM #21 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 10:28:26 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:28:26 AM #23 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 10:28:26 AM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 11:09:08 AM #25 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 11:09:08 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:09:09 AM #27 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 11:09:10 AM #28 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 11:09:10 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 22 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.9.2007 NeroAPI 7:28:56 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 7:28:56 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 7:28:56 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 7:29:01 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 7:29:01 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 7:29:01 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 7:29:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:29:01 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:29:01 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 7:29:06 PM #10 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 7:29:06 PM #11 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 7:29:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 7:29:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 7:29:23 PM #14 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 0 7:29:23 PM #15 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= This disc is not empty. (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW.) Accessing disc... (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW.) 7:29:23 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 7:29:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 7:29:24 PM #18 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 7:29:24 PM #19 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 7:29:24 PM #20 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 7:29:24 PM #21 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 7:29:24 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:29:24 PM #23 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 7:29:24 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 8:11:43 PM #25 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 8:11:44 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:11:44 PM #27 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 8:11:45 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 8:11:45 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 20 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.9.2007 NeroAPI 2:25:52 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 2:25:52 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 2:25:52 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 2:25:55 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 2:25:55 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:25:55 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 2:25:55 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:25:55 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:25:55 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:25:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286143 (508:01.68, 4465MB) 2:25:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 2:25:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 0 2:25:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:25:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 2:25:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286144 | lead-out | 1 | 0x41 | 0x00 2:25:57 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 2:25:57 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:25:57 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 2:25:57 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 2:25:57 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:25:57 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 2:25:57 PM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 3:07:10 PM #23 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks 3:07:10 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:07:10 PM #25 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 3:07:11 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 3:07:11 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 18 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.9.2007 NeroAPI 7:30:52 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 7:30:52 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 7:30:52 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 7:30:52 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 7:30:52 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 7:30:52 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 7:30:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:30:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:30:52 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 7:30:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 7:30:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 7:30:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW 7:30:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:30:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 7:30:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 7:30:53 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 7:30:53 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 7:30:53 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 7:30:53 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 7:30:53 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:30:53 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04017600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 7:30:53 PM #22 Phase 98 File APIProgress.cpp, Line 276 Start formatting disc before burning 7:31:08 PM #23 Phase 100 File APIProgress.cpp, Line 276 Formatting disc was successful 7:31:08 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 8:11:18 PM #25 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 8:11:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:11:20 PM #27 Text 0 File DVDPlusRW.cpp, Line 883 Media-Format will be stopped after burning 8:11:20 PM #28 Phase 133 File APIProgress.cpp, Line 276 Writing short lead-out 8:11:24 PM #29 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 8:11:25 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 8:11:25 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 20 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.9.2007 NeroAPI 12:55:50 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:55:50 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:55:50 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:55:50 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 12:55:50 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:55:50 AM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 12:55:50 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:55:50 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:55:50 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:55:51 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 12:55:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 12:55:51 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW 12:55:51 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:55:51 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 12:55:51 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 12:55:51 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:55:51 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:55:51 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:55:51 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 12:55:51 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:55:51 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03367000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 12:55:51 AM #22 Phase 98 File APIProgress.cpp, Line 276 Start formatting disc before burning 12:56:07 AM #23 Phase 100 File APIProgress.cpp, Line 276 Formatting disc was successful 12:56:07 AM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 1:36:30 AM #25 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 1:36:30 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:36:32 AM #27 Text 0 File DVDPlusRW.cpp, Line 883 Media-Format will be stopped after burning 1:36:32 AM #28 Phase 133 File APIProgress.cpp, Line 276 Writing short lead-out 1:36:35 AM #29 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 1:36:36 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 1:36:36 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-0009-9130-2285-0668-5200 1A4N-0000-0000-2549-3454-6811 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/11/2006 11:23:58 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <HP DVD Writer 400c> Version: FH04 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00REA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 400c atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: Off DiskPeripheral : SEAGATE ST373453LW HPS2 Symmpi Port 3 ID 2 DMA: Off === CDRom-Device-Map === HP DVD Writer 400c E: CDRom0 _NEC DVD_RW ND-3520A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2047MB (2097151kB) Memory in use : 19 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.9.2007 NeroAPI 9:44:56 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 9:44:56 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 9:44:56 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 9:44:56 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 9:44:56 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 9:44:56 AM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 9:44:56 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:44:56 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:44:56 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:44:56 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 9:44:56 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 9:44:56 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HP DVD Writer 400c, Media type: DVD+RW 9:44:56 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:44:56 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 9:44:56 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 9:44:56 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 9:44:56 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 9:44:56 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 9:44:56 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 9:44:56 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:44:56 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03767400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 9:44:56 AM #22 Phase 98 File APIProgress.cpp, Line 276 Start formatting disc before burning 9:45:11 AM #23 Phase 100 File APIProgress.cpp, Line 276 Formatting disc was successful 9:45:11 AM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 10:25:31 AM #25 Text 0 File WriterStatus.cpp, Line 116 <HP DVD Writer 400c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 10:25:31 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:25:33 AM #27 Text 0 File DVDPlusRW.cpp, Line 883 Media-Format will be stopped after burning 10:25:33 AM #28 Phase 133 File APIProgress.cpp, Line 276 Writing short lead-out 10:25:36 AM #29 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 10:25:37 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:25:37 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/11/2006 11:23:56 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== PS Sorry about posting twice, just isn't my day...
