NEW CO*LSAT 6000

So I finally got sick of my old receiver that didnt work...(and was a clone) so I picked up the csat6000 AND ITS FINNALY IN!

...one thing....i dont know how to set it up

PLEASE HELP, all dishes and what not should be aligned from the last receiver

 

so i got it working, but i cant get my two dishes to work at the same time. its either the 148 or 119. any ideas

 

If the 2 dishes worked before with your old receiver, then it probably has to do with the settings in you antenna setup. The desq. switch port settings have to match the input from the sats. If sat 119 input goes to port 1, make sure it shows that in the receiver setup. Match 148 input the same way.

Jerry

 

hey thanks it worked!

whats the set up to get BEV? i only get DNET

 

BEV usually requires aiming another dish at the BEV sats. They are at 82 and 91 degrees. Once the dish is aimed you just run the cable to the extra ports of the switch and set up the same as you did for DN.

Jerry