Hi all, I am using Nero 6 and getting a burn error after a few minutes. I am pretty confused since I have burned many of the same Sony DVD+R discs on my Iomagic drive for a long time. It burns for a few minutes and then dies. I have looked at various websites and threads and nothing seems to address my problem. Here is the log: Thanks for all the help. Kerwin Kam SG 1A20-020K-0330-1726-8318-4416 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <DVDRW IDE 16X> Version: A071 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVDRW IDE 16X >Version: A071 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVDRW IDE 16X F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 274MB (280732kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.9.2005 ISO compilation 12:00:18 AM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:00:18 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 12:00:18 AM #3 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 12:00:18 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:00:18 AM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:00:18 AM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1857855 (412:51.30, 3628MB) 12:00:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 12:00:18 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVDRW IDE 16X, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 1 12:00:18 AM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:00:18 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1857856 (1857856) = #1857856/412:51.31 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1857856 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 12:00:18 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3804889088, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1857856 | lead-out | 1 | 0x41 | 0x00 12:00:18 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:00:19 AM #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 12:00:19 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:00:19 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 12:00:19 AM #16 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AF5A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 12:00:19 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:00:19 AM #18 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: R01 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8 23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 12:00:19 AM #19 CDR -1207 File DVDR.cpp, Line 5065 Book Type automatically set to: Current recorder setting 12:00:19 AM #20 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 12:02:29 AM #21 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C040000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x9F 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 12:02:29 AM #22 CDR -1135 File Writer.cpp, Line 311 Write error 12:02:29 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:02:30 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:04:31 AM #25 SCSI -1135 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 12:04:31 AM #26 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:05:25 AM #27 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 12:05:25 AM #28 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
shaft888 Hi. R u making an image first or copying "on the fly" with Nero(disc 2 disc) If so copy an image 2 the HD first. Sounds a bit odd otherwise, how old is ur burner. The only time ive had anything like this happen was when i had 2 different burning programs open at the same time. i.e. the first burning program had control of the drive(locked) & when the other program tried 2 access the drive the dvd spat the dummy & ejected the dvd drawer. Hope it helps
@shaft888 - - EDIT OUT your serial number - is your burner one of these on this page ? - http://www.iomagic.com/Firmware/FirmwareDownload.html oh hang on, it's not a certain type of BTC drive is it ?....shall await your reply.... - splat!...i suspect out of date firmware, but need you to help me verify exactly which drive you have....
What is BTC drive? I read some links on this and it seems that this is a pretty bad drive. I have the following info from Nero InfoTool: Drive string: F\DVDRW IDE 16X Firmware version: A071 Couldn't find this drive on the iomagic link.
also, I am just burning a data disk from files on my hard drive. I actually just tried it again and Nero said it actually completed successfully. however, when i put the disk in the same drive, it just keeps on spinning and doesn't recognize it. The drive does recognize the other burned data disks I made from several months ago.
unfortunately you have one of those annoying generic drives, ie "DVDRW IDE 16X". you've given a clue, that yours is an Iomagic drive, but as you can see from that link i posted before, it's still not enough to go on. i'll do another search and see what i can find... edit- the best clues i can find are these - http://forums.afterdawn.com/thread_view.cfm/180855 http://forums.afterdawn.com/thread_view.cfm/201669 http://forums.afterdawn.com/thread_view.cfm/226388 my quote from one of those - - luckily you know it's an Iomega of sorts, so we're getting closer.... a-ha, snippet from http://forums.afterdawn.com/thread_view.cfm/213588 - Basically you need to give me more to go on, as you see from that quote your Iomagic drive may well be a rebadged BTC drive. check that out for me, your firmware's definitely out of date, but we need to home in on exactly which drive you have before i can point you towards the correct update...
