Hi all Thanks in advance for any help offered. I am new to copying and burning. I am trying to make a back up Dvd disc to use in a portable dvd player wich i normaly use in the car for the kids, the originals keep getting sctrached. I just tried using Nero 8 here is a copy of the error report: Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.1.1.0 Internal Version: 8, 1, 1, 0 (Nero Express) Recorder: <SONY DVD RW DW-Q30A> Version: YYS3 - HA 1 TA 0 - 8.1.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <SONY DVD RW DW-Q30A >Version: YYS3 - HA 1 TA 0 - 8.1.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : SONY DVD RW DW-Q30A atapi Port 1 ID 0 DMA: On CdRomPeripheral : ATAPI COMBO52XMAX atapi Port 1 ID 1 DMA: On DiskPeripheral : Maxtor 6Y160M0 YAR5 viasraid Port 2 ID 0 DMA: Off CdRomPeripheral : DH1144D PLX523E 1.0 dtscsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-Q30A D: CdRom0 ATAPI COMBO52XMAX E: CdRom1 DH1144D PLX523E F: CdRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048044kB) Free physical memory: 598MB (612736kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.10.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 22:12:24 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 22:12:34 #2 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 22:12:34 #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 1837334 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 22:12:34 #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 1837334 = 1837334, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 22:12:34 #5 Text 0 File Burncd.cpp, Line 3530 Turn on Disc-At-Once, using DVD media 22:12:34 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1837333 (408:17.58, 3588MB) 22:12:34 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 22:12:34 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:12:34 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1837334 (1837334) = #1837334/408:17.59 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1837334 blocks [Image Recorder] -------------------------------------------------------------- 22:12:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3762860032, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1837334 | 1837334 | 0x00 1837334 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 22:12:34 #11 Text 0 File Burncd.cpp, Line 4316 Caching options: cache CDRom or Network-No, small files-No (<64KB) 22:12:34 #12 Phase 120 File dlgbrnst.cpp, Line 1764 Creating the image for burning 22:12:34 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2735 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 22:12:34 #14 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 590400 22:20:01 #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 1837334 (1C0916h), length 0 blocks 22:20:01 #16 Phase 121 File dlgbrnst.cpp, Line 1764 Creating Image completed successfully 22:20:01 #17 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 22:20:04 #18 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 22:20:04 #19 Text 0 File Cdrdrv.cpp, Line 11276 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 22:20:06 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 22:20:07 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3762860032 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Jeff\My Documents\TempImage.nrg> 22:20:07 #3 Text 0 File Burncd.cpp, Line 3530 Turn on Disc-At-Once, using DVD media 22:20:32 #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1837333 (408:17.58, 3588MB) 22:20:32 #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 22:20:33 #6 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: SONY DVD RW DW-Q30A, Media type: DVD-R Disc Manufacturer ID: <CMC MA> <G. AM3> Disc Application Code: 64, Disc Physical Code: 193 22:20:33 #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.) 22:20:33 #8 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1837334 (1837334) = #1837334/408:17.59 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1837334 blocks [D: SONY DVD RW DW-Q30A] -------------------------------------------------------------- 22:20:33 #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [D: SONY DVD RW DW-Q30A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3762860032, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1837334 | 0 | 0x00 1837334 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 22:20:37 #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 22:20:37 #11 Text 0 File Burncd.cpp, Line 4316 Caching options: cache CDRom or Network-No, small files-No (<64KB) 22:20:37 #12 Phase 36 File dlgbrnst.cpp, Line 1764 Burn process started at 16x (22,160 KB/s) 22:20:37 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2735 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 22:20:37 #14 Text 0 File DVDR.cpp, Line 3245 Recording mode: Sequential Recording Mode 22:20:37 #15 Text 0 File DVDR.cpp, Line 3401 Start write address at LBA 0 DVD high compatibility mode: Yes 22:20:37 #16 Text 0 File Cdrdrv.cpp, Line 10026 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) Outer Limit of Data Recordable Area: 26127F h Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0, Extended part version: 33 Start PSN of the Extra Border Zone: 0 h Start PSN of Physical format information blocks in Extra Border Zone: 0 h Media Specific [16..783]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01 40 C1 FD 9E D8 52 00 - 02 84 0D 12 98 99 90 00 .@....R......... 03 43 4D 43 20 4D 41 00 - 04 47 2E 20 41 4D 33 00 .CMC.MA..G..AM3. 05 88 80 00 00 00 02 00 - 06 09 0D 14 98 88 90 00 ................ 07 88 80 00 00 00 00 00 - 08 07 17 0A 0E 09 04 00 ................ 09 95 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 ................ 0B 06 17 15 B8 99 85 00 - 0C B8 9A 32 03 20 32 00 ...........2..2. 0D 00 00 D0 00 00 00 00 - 0E 09 1F 39 2F 25 1C 00 ...........9/%.. 0F 50 19 29 19 89 B5 00 - 10 88 84 00 04 00 04 00 .P.)............ 11 00 00 00 00 00 00 00 - 12 09 2B 37 2D 29 1B 00 ..........+7-).. 13 50 1D 2D 1F A6 B5 00 - 14 88 80 00 00 00 00 00 .P.-............ 15 00 00 00 00 00 00 00 - 16 0B 45 3D 3B 1F 25 00 ..........E=;.%. 17 30 25 31 0D 8A B5 00 - 18 88 80 00 00 00 00 00 .0%1............ 19 00 00 00 00 00 00 00 - 1A 0C 51 51 51 45 2D 00 ..........QQQE-. 1B 90 23 2D 19 79 B5 00 - 1C 88 80 00 00 00 00 00 ..#-.y.......... 1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 22:20:37 #17 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 22:21:21 #18 Text 0 File Cdrdrv.cpp, Line 1367 22:21:21.296 - 㩄匠乏⁙噄⁄坒䐠ⵗ㍑䄰 : Queue again later 22:27:11 #19 SPTI -1135 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 19 68 80 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0b7de540: Len x10000 0x00 00 01 BA 44 10 4D 95 BC 3B 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 F2 0C 93 AC F6 BA E8 29 AD 0x8C A0 C2 4B 5D 1F 67 31 06 41 F7 A8 51 8D 9A 02 22:27:11 #20 CDR -1135 File Writer.cpp, Line 306 Write error D: SONY DVD RW DW-Q30A 22:27:12 #21 Text 0 File DVDR.cpp, Line 3803 EndDAO: Last written address was 1665151 (19687Fh) 22:27:12 #22 Phase 38 File dlgbrnst.cpp, Line 1764 Burn process failed at 16x (22,160 KB/s) 22:27:12 #23 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 22:27:14 #24 Text 0 File Cdrdrv.cpp, Line 11276 DriveLocker: UnLockVolume completed 22:27:14 #25 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) I hope this makes sense to someone as I am totaly lost as I said I am a newbie at this stuff so please be gentle and plain English please Thanks Jeff
*Try a different Brand of Disc(Verbatum Ty's) **Reduce the burn speed to 4x or 8x **Reduce the Target size to 4300 (You may not need to do this if you have Good Quakity Disc.) The Disc you Have Aren't considered Quality Disc. **Check for a Firmware Update for your Drive You Could also replace that 52x CD burner with a new SState of the art Dvd Burner For about 30 bucks. (If you Wanted)
Firmware YYS7 http://forum.rpc1.org/dl_firmware.php?download_id=2239 Yes the media has mixed results. Add to that the fast burn rate and old firmware, not good. http://www.videohelp.com/dvdmedia?dvdmediadvdridsearch=CMC MAG. AM3
Thank you both I will try the suggestions and let you know how I get on. Can you recommend a good quality disc, I am in the UK. Do they need to be DVD-R Or R+ or whatever. Thanks again Jeff
and last but not least you might like to turn the dma on these 2 back on yeah definitely go back to the 4300mb mark.I doubt i would agree with berryone advice about you may not need to if you get better quality discs as anything past the 4300 mb mark on a disc is really on the outskirts of the disc and is where the dye is the most unevenest and where errors start to creep into your burns.However according to your log file you are trying to burn to the very edge
Sorry for being so daft but how do I do this: Quote: -------------------------------------------------------------------------------- DiskPeripheral : Maxtor 6Y160M0 YAR5 viasraid Port 2 ID 0 DMA: Off CdRomPeripheral : DH1144D PLX523E 1.0 dtscsi Port 4 ID 0 DMA: Off -------------------------------------------------------------------------------- you might like to turn the dma on these 2 back on Quote: -------------------------------------------------------------------------------- Last possible write address on media: 2298495 (510:46.45, 4489MB) Thanks Jeff
Adjusting the Target Size Guide http://webpages.charter.net/bacitup/TheGuides/ADJUSTING TARGET SIZE SHRINK.pdf Also Look at the Various Links in my Signature For Helpful Hints, Programs and Guides. For Media Browse this Forum http://forums.afterdawn.com/forum_view.cfm/47
Thanks for all your help people. I will have a look at the week end see how I get on. I will post back and let you all know. Cheers Jeff
