Hello , When I try to burn a DVD i get this - "no seek comlete" what is the problem? I use the same disks I use before , the same drive , the same driver , so.....? and if I try to burn a CD on the drive - it's all good and no eror is given. I have a NEC 3550A, and I use nero 2.0.0.28 can someone help me??? thx!!!!
Hi dave_1234 Post the Nero log just be sure to edit out the serial # - begins w/ 1A, 1C or 5C. If you didn't save the log here's a how to find and post one - link
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.8 (Nero Express) Recorder: <MAD DOG MD-16X2DVD9-8X> Version: 1.F3 - HA 0 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <MAD DOG MD-16X2DVD9-8X >Version: 1.F3 - HA 0 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : MAD DOG MD-16X2DVD9-8X atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP0812C atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MAD DOG MD-16X2DVD9-8X D: CDRom0 SONY CD-RW CRX230ED H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 130MB (133608kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.8.2007 ISO compilation 10:38:09 #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:38:09 #2 Text 0 File Reader.cpp, Line 127 Reader running 10:38:09 #3 Text 0 File Writer.cpp, Line 122 Writer MAD DOG MD-16X2DVD9-8X running 10:38:09 #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 10:38:09 #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 10:38:09 #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2148191 (477:22.41, 4195MB) 10:38:09 #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD DVD) 10:38:09 #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: MAD DOG MD-16X2DVD9-8X, Media type: DVD-R Disc Manufacturer: INFOME - DIAR20 Disc Application Code: 64, Disc Physical Code: 193 10:38:09 #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:38:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2148192 (2148192) = #2148192/477:22.42 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148192 blocks [MAD DOG MD-16X2DVD9-8X] -------------------------------------------------------------- 10:38:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [MAD DOG MD-16X2DVD9-8X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4399497216, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2148192 | lead-out | 1 | 0x41 | 0x00 10:38:09 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:38:09 #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 10:38:09 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:38:09 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 6x (8,310 KB/s) 10:38:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:38:10 #17 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 10:38:10 #18 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 10:38:10 #19 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 10:38:10 #20 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:38:11 #21 Text 0 File Cdrdrv.cpp, Line 1287 10:38:11.625 - MAD DOG MD-16X2DVD9-8X\H0 T0 : Queue again later 10:39:33 #22 SCSI -1093 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03450000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x0B 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 10:39:33 #23 CDR -1093 File Writer.cpp, Line 311 No seek complete 10:39:34 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:39:34 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:39:34 #26 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was 2943 10:39:38 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 6x (8,310 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24 File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ok here's some suggestions: What brand of discs are you using? Brand name use different manufacturers so you can get a new one with each spindle you buy. The ones you have now are made by Disc Manufacturer: INFOME - DIAR20 Not one of the better compatible manufacturers. Try different media like Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell. The no seek complete can be caused by media. File 'Drivers\CDRALW2K.SYS Roxio and Nero don't always play well together though if you've had Roxio installed for awhile and had no problems using Nero this might not be the case here. You can try uninstalling it and running the zap tool. Nero can use an update too - probably not causing this problem but ner has you're drive listed as generic - Connected to MMC as unknown drive with class-nr : 1 Update package 1 - 6.6.1.15
waht is Roxio? I don't think I hed this program ever so should I install fron the link you gave me? I will update Nero - and I'll try again And about the discs - I use SIlverline (there are 25 in a box , and I used 10 before - and there were no problems) but if you say I will bring from a friend sony \Verbatim\Maxell and I'll try again.
Roxio is a burning sofware like Nero - it can also be under the name of Sonic, Record Now that come to mind. The Roxio driver is also used by I think WinAmp. Yep bum one of those from a friend to rule out media.
No - If you have a Roxio product installed the 2 (roxio & nero) don't always play well together. So try the different media 1st. Try the good free burning program - ImgBurn. If you are burning non iso (image) files use the build mode to add them - guide
I dont know why but I wanted to burn other files in the same disks that I have and then we gave me that massage PMA updata failure (this time he ejected the disk after burning 4%) this is the log file Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <MAD DOG MD-16X2DVD9-8X> Version: 1.F3 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <MAD DOG MD-16X2DVD9-8X >Version: 1.F3 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : MAD DOG MD-16X2DVD9-8X atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP0812C atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MAD DOG MD-16X2DVD9-8X D: CDRom0 SONY CD-RW CRX230ED H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 256MB (262492kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2007 ISO compilation 15:57:02 #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 15:57:03 #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:57:03 #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:57:03 #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 15:57:03 #5 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2149055 (477:34.05, 4197MB) 15:57:03 #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD DVD) 15:57:03 #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: MAD DOG MD-16X2DVD9-8X, Media type: DVD-R Disc Manufacturer: INFOME - DIAR20 Disc Application Code: 64, Disc Physical Code: 193 15:57:03 #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:57:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2149056 (2149056) = #2149056/477:34.6 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2149056 blocks [MAD DOG MD-16X2DVD9-8X ] -------------------------------------------------------------- 15:57:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [MAD DOG MD-16X2DVD9-8X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4401266688, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2149056 | lead-out | 1 | 0x41 | 0x00 15:57:03 #11 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:57:03 #12 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 15:57:03 #13 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 15:57:03 #14 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 15:57:03 #15 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 8x (11,080 KB/s) 15:57:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:57:03 #17 Text 0 File DVDR.cpp, Line 2846 Recording mode: Sequential Recording Mode 15:57:03 #18 Text 0 File DVDR.cpp, Line 3002 Start write address at LBA 0 DVD high compatibility mode: Yes 15:57:03 #19 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:57:05 #20 Text 0 File Cdrdrv.cpp, Line 1224 15:57:05.375 - D: MAD DOG MD-16X2DVD9-8X : Queue again later 15:58:00 #21 SPTI -1194 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 04 Buffer x26020040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15:58:00 #22 CDR -1194 File Writer.cpp, Line 281 PMA update failure D: MAD DOG MD-16X2DVD9-8X 15:58:01 #23 Text 0 File DVDR.cpp, Line 3246 EndDAO: Last written address was -1 15:58:07 #24 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 8x (11,080 KB/s) 15:58:08 #25 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:58:13 #26 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 15:58:13 #27 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) what is the problem now?
Ok I see your still using the same discs. PMA error can also be caused by the media you are using. Have you tried other media yet?
Yes I tried and I still can't it's said now - Power cakibration error and this is the log file Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <MAD DOG MD-16X2DVD9-8X> Version: 1.F3 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <MAD DOG MD-16X2DVD9-8X >Version: 1.F3 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : MAD DOG MD-16X2DVD9-8X atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP0812C atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MAD DOG MD-16X2DVD9-8X D: CDRom0 SONY CD-RW CRX230ED H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 180MB (185320kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.9.2007 ISO compilation 11:09:48 #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:09:48 #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:09:48 #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:09:48 #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 11:09:49 #5 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2148191 (477:22.41, 4195MB) 11:09:49 #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD DVD) 11:09:49 #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: MAD DOG MD-16X2DVD9-8X, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 11:09:49 #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:09:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2148192 (2148192) = #2148192/477:22.42 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148192 blocks [MAD DOG MD-16X2DVD9-8X ] -------------------------------------------------------------- 11:09:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [MAD DOG MD-16X2DVD9-8X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4399497216, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2148192 | lead-out | 1 | 0x41 | 0x00 11:09:49 #11 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:09:49 #12 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 11:09:49 #13 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 11:09:49 #14 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 11:09:49 #15 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 6x (8,310 KB/s) 11:09:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:09:49 #17 Text 0 File DVDR.cpp, Line 2846 Recording mode: Sequential Recording Mode 11:09:49 #18 Text 0 File DVDR.cpp, Line 3002 Start write address at LBA 0 DVD high compatibility mode: Yes 11:09:49 #19 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:09:50 #20 Text 0 File Cdrdrv.cpp, Line 1224 11:09:50.421 - D: MAD DOG MD-16X2DVD9-8X : Queue again later 11:10:47 #21 SPTI -1106 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x073f0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11:10:47 #22 CDR -1106 File Writer.cpp, Line 281 Power calibration error D: MAD DOG MD-16X2DVD9-8X 11:10:47 #23 Text 0 File DVDR.cpp, Line 3246 EndDAO: Last written address was -1 11:10:54 #24 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 6x (8,310 KB/s) 11:10:54 #25 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:10:56 #26 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 11:10:56 #27 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 08/03/2007 01:51:00 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ok here's a blurb from Nero on the power calibration error - it says cd but applies to dvds also. You've tried different media and the firmware is up to date so try the other suggestions. I would also 1st try cleaning the lens of the drive with either blowing some canned air or using a dvd lens cleaner. I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why? Power Calibration is controlled by the recorder. Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC). This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times. If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder. Please try the following solutions: * Update the firmware of your recorder. Please check the manufacturer's website for the latest version. * Try another brand of CD-R or CD-RW media. * Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal. * Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. * Send the recorder in for service.
Now I tried a different media of DVD and also from DVD+R and not DVD-R like before and this time it burn!!!! so I have a new question now: Do I need to use only DVD+R disks? , or can I use the same media foor DVD-R disk? (this is becuase they sale the disks in packs of 20) thx!
If +R are working I'd stick with those but it really shouldn't make a diff. Which brand did you buy? Different brands use different manufacturers so these +R may be more compatible with the drive.
I would. ID who actually made these to get a better idea of which media to buy. Pop a disc in the drive then open Nero and go to ToolKit>CD-DVD Speed. Click on the disc info tab and the manufacturer will be listed there.
Not a problem. You might have a problem with these since the drive can't id them - usually means the media code is not in the drives firmware. Doesn't always mean it will fail so looks like your good for now. If it does try the media in my post above - they're usually pretty compatible w/ the different drives.
