I seem to have an issue in either the burning or the ripping part of backing up movies. I am not sure which it is, because after I am done burning it the movie either does not work (not even able to be read in the DVD player), or the whole movie is full of skips. I've tried multiple programs, multiple media. I use DVD Shrink normally, if that fails, I use it along with AnyDVD, if that fails, I try different variations often looked up on this website. I use DVD Shrink to burn the DVDs as well. Any suggestions would be appreciated.
cool.. thread teleported to Nero forum. if it's Nero 6, let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar. if it's Nero 7, let's have LAST section of your Nero log which lives in C:\Program Files\Nero\Nero 7\Core\NeroHistory but DO NOT post your serial number which usually begins with '5C80' or similar. Either way you can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
am i just posting the small section of the Nero-Burning Rom, History File, because thats not the very last section? can i just post the whole log file and star out the serial?
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 7:33:44 PM Nero API version: 6.3.1.26 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <QSI DVD+-RW SDW-085> Version: AX03 - HA 1 TA 1 - 6.3.1.26 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : ST910021AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI DVD+-RW SDW-085 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === QSI DVD+-RW SDW-085 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095148kB) Free physical memory: 1465MB (1500532kB) Memory in use : 28 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.12.2006 NeroAPI 12:00:06 AM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 12:00:06 AM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 12:00:06 AM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 12:00:06 AM #4 Text 0 File Reader.cpp, Line 126 Reader running 12:00:06 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:00:06 AM #6 Text 0 File Writer.cpp, Line 124 Writer QSI DVD+-RW SDW-085 running 12:00:06 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:00:06 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:00:06 AM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-At-Once, using DVD media 12:00:07 AM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2206095 (490:14.45, 4308MB) 12:00:07 AM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 12:00:07 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: QSI DVD+-RW SDW-085, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 12:00:07 AM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:00:07 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2206096 (2206096) = #2206096/490:14.46 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2206096 blocks [QSI DVD+-RW SDW-085 ] -------------------------------------------------------------- 12:00:07 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [QSI DVD+-RW SDW-085 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4518084608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2206096 | lead-out | 1 | 0x00 | 0x41 12:00:07 AM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 12:00:07 AM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 12:00:07 AM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 12:00:07 AM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 2.4x (3,324 KB/s) 12:00:10 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:00:10 AM #21 Text 0 File Cdrdrv.cpp, Line 8228 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:00:10 AM #22 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: Yes 12:24:02 AM #23 Text 0 File WriterStatus.cpp, Line 115 <QSI DVD+-RW SDW-085 > start writing Lead-Out at LBA 2206096 (21A990h), lenght 0 blocks 12:24:02 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:24:43 AM #25 Phase 37 File APIProgress.cpp, Line 273 Burn process completed successfully at 2.4x (3,324 KB/s) 12:24:44 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 12:24:44 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- quite outdated, not normally a problem but see 2 comments down - so far unable to verify if the firmware for this burner is up to date or not, got some info on your burner & similar burners here - http://forum.rpc1.org/viewtopic.php?t=38807&view=next&sid=0daeaea56eb853955afaddb5f00844b9 http://forum.rpc1.org/viewtopic.php?t=39475&sid=5abc32811cd01615a2c456b92146dac0 http://club.cdfreaks.com/showthread.php?t=112399 http://www.qsinc.com.tw/qsi/Official_Download_en ...so don't know if we can improve burning via updating firmware, we'll have to just attck the rest of the logfile.. - yup, Nero's too old to recognise your burner, update to 6.6.0.18 from here - Package 1 - not good media at all my sig for reasons not to use CMC media and the sig also has decent media recommendations - why burning so slow ? - hmmm, we already know the discs are skipping on playback, maybe we should do a CRC scan ie check one of those discs you've already burnt, for corruption. see here for info - http://forums.afterdawn.com/thread_jump.cfm/431362/2609745 (and the reply to that one) - CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml Basically, try all the suggestions, then try to burn another movie, but only do a Simulation burn (so as to not waste any more discs) and post that section of logfile..
the funny thing is, I do not have anything from roxio on my computer, I also checked to make sure, and it "zapped" easy cd creater which i was unable to find is my drive bad? it came with my notebook, i have an ABS but i will try these things and try to burn a movie i also burned at 2.4 because i thought possibly the movies weren't burning right at 8x
alright, so after burning it... it works on one dvd player, but not the other one. it reads but then it skips like an incredible amount... could it just be the dvd player? or is it the DVD?
not sure, that's why i suggested doing a CRC scan of that or a.n.other troublesome disc... if there's corruption on there we can narrow down the problem more
you might have it already installed, look up the 'nero toolkit' shortcuts (and see if 'Nero CD-DVD Speed' is there, then run a 'scandisc' on the disc that skips.... if there's corruption you'll get little red blocks on the scan... and that's where the skipping should be... ..if there's no corruption in theory there shouldn't be any skipping, ie the player might just not like those discs...
alright, so i did the disc check and it was 100% good but the dvd still fails to play correctly in the dvd player my brother using a mac burned the same movie and it successfully played in that dvd player could it be the files when i rip the dvd?
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <QSI DVD+-RW SDW-085> Version: AX03 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST910021AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI DVD+-RW SDW-085 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === QSI DVD+-RW SDW-085 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2046MB (2095148kB) Free physical memory: 1515MB (1551860kB) Memory in use : 25 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.12.2006 NeroAPI 2:30:35 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 2:30:35 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 2:30:35 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 2:30:35 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 2:30:35 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:30:35 PM #6 Text 0 File Writer.cpp, Line 122 Writer QSI DVD+-RW SDW-085 running 2:30:35 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:30:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:30:36 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:30:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2206095 (490:14.45, 4308MB) 2:30:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 2:30:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: QSI DVD+-RW SDW-085, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 2:30:36 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:30:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2206096 (2206096) = #2206096/490:14.46 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2206096 blocks [QSI DVD+-RW SDW-085] -------------------------------------------------------------- 2:30:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [QSI DVD+-RW SDW-085] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4518084608, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2206096 | lead-out | 1 | 0x41 | 0x00 2:30:36 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 2:30:36 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:30:36 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 2:30:36 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 2:30:39 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01D15600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 2:30:39 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:30:39 PM #22 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 2:30:39 PM #23 Text 0 File DVDR.cpp, Line 5766 Drive: QSI DVD+-RW SDW-085 Book Type request [QSI]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 2:30:39 PM #24 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 2:30:39 PM #25 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 2:45:45 PM #26 Text 0 File WriterStatus.cpp, Line 116 <QSI DVD+-RW SDW-085 > start writing Lead-Out at LBA 2206096 (21A990h), lenght 0 blocks 2:45:45 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:46:26 PM #28 Text 0 File DVDR.cpp, Line 5766 Drive: QSI DVD+-RW SDW-085 Book Type request [QSI]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 2:46:26 PM #29 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) 2:46:27 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 2:46:27 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
well that's a better burn log, plus i see the +R discs are being correctly 'booktyped' to dvd-rom so i guess the standalone player just doesn't like those CMC discs.
no problem, i still haven't found out if the firmware on the burner is up to date, but maybe try some better discs when you can, see my sig for details..
alright, yea i looked at those links you sent me but like i couldnt tell if they were matching up with the model number and such... i also tried a few sites that i usually get drivers from and they didnt have it on their site
