I have recently upgraded to Nero 7.Have not been able to burn anything since then.Have tried upgrading firmware, used every different kind of media (Verbatim,Sony,Dysan,Toshiba)but to no avail.Have tried reinstalling my LG DVD GSA 4163B drive still no help! Ran Antivirus, Adware ETc Still nothing. PLEASE HELP! log 5Cxxxxxxxxxxxxxxxxxxxxxxx Windows 2000 5.0 IA32 WinAspi: - NT-SPTI used Nero Version: 7.0.0.0 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.01 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 1 DMA: On DiskPeripheral : WDC WD400BB-00FJA0 atapi Port 0 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8526B D: CDRom0 HL-DT-ST DVDRAM GSA-4163B F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 36700160 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 223MB (228848kB) Free physical memory: 70MB (72684kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.1.2006 miniDVD 08:23:57 AM #1 Phase 112 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation started 08:23:58 AM #2 Phase 114 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation completed (no file modified) 08:23:58 AM #3 Text 0 File Isodoc.cpp, Line 6410 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 08:23:58 AM #4 Phase 111 File dlgbrnst.cpp, Line 1724 DVD-Video files sorted 08:23:58 AM #5 Text 0 File Burncd.cpp, Line 3007 HL-DT-ST DVDRAM GSA-4163B Buffer underrun protection activated 08:24:00 AM #6 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 35840KB of Memory 08:24:00 AM #7 Text 0 File Reader.cpp, Line 124 Reader running 08:24:00 AM #8 Text 0 File Writer.cpp, Line 113 Writer F: HL-DT-ST DVDRAM GSA-4163B running 08:24:00 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 08:24:01 AM #10 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 08:24:01 AM #11 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using CD-R/RW media 08:24:01 AM #12 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 359057 ( 79:49.32) 08:24:01 AM #13 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 08:24:01 AM #14 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: HL-DT-ST DVDRAM GSA-4163B 08:24:01 AM #15 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 08:24:01 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 359058 (359058) = #359058/79:47.33 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359058 blocks [F: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 08:24:01 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [F: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735657984, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 359058 | lead-out | 1 | 0x41 | 0x00 08:24:01 AM #18 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 08:24:01 AM #19 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 08:24:01 AM #20 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 08:24:01 AM #21 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 08:24:01 AM #22 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 16x (2,400 KB/s) 08:24:01 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 08:24:01 AM #24 Text 0 File MMC.cpp, Line 16828 StartDAO : CD-Text - Off 08:24:01 AM #25 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON 08:24:01 AM #26 Text 0 File MMC.cpp, Line 17059 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 4f 31 21 08:24:18 AM #27 SPTI -600 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 FF FF FF 6A 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x040c0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08:24:18 AM #28 CDR -600 File Writer.cpp, Line 302 Device not available F: HL-DT-ST DVDRAM GSA-4163B 08:24:18 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 08:24:18 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 08:24:34 AM #31 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 30/06/2005 08:47:33 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
silkman Hi, You need to go back to your post and edit out the serial number. It starts with 5C80. Just go to the pencil and paper symbol by your post, and click on that. It will let you edit your post, just put xxxx over the numbers. Nero is up to 7.0.1.4b and it might help to update. http://www.nero.com/nero7/enu/nero7-demo.php that drive looks like it's firmware needs updating. http://forum.rpc1.org/dl_firmware.php?download_id=1886 Looks like it is up to 1.05 Real problem here. Most suggest 512MB of memory as a minimum needed for ripping/burning, and you are trying to do it with 233MB, and only had 70MB free for the operation. The best bet would be to get another memory stick or two, but if you cant do that, then try closing down as many programs as you can when burning. Device not available?? I wonder what was using it? Maybe this is just an older version of nero problem, and the update may fix it. Give those suggestions a try and post back if still having problems.
thanks for the help but still not working.If I go back to Nero 6 will it get better. Also tried registry mechanic.
Some ppl can't get a good burn with Nero 7, but going back to vers 6 gives them success. Just by going back to 6 and changing nothing else. Just be sure to write down your serial number from the versions, then use the nero clean tool to remove nero from your system completely. http://www.nero.com/nero6/enu/Clean_Tools.html and here is the latest version 6 http://www.nero.com/nero6/enu/nero-up.php You will need package 1 & 2, but not #3. post a burn log from vers 6 if it fails, and someone will wade thru it.
